Issue 17, 2015

High-performance and high-durability perovskite photovoltaic devices prepared using ethylammonium iodide as an additive

Abstract

In this study, we determined that the film morphologies, crystallinities, and optical properties of CH3NH3PbI3−xClx perovskite (PVSK) layers can be manipulated by incorporating a small amount of ethylammonium iodide (EAI) into the perovskite precursor solution. For our EAI-derived films, we observed higher absorbances at higher wavelengths and higher degrees of crystallinity, both of which were associated with the higher surface coverage of the PVSK films. The optimized power conversion efficiency (PCE) improved from 9.4 ± 0.76 to 10.2 ± 0.58% after the addition of 0.5 vol% of EAI. Devices based on EAI-containing PVSK exhibited extremely high stability, retaining approximately 80% of their PCEs (T80) under accelerated heating (65 °C) in a dark N2-filled glove box for over 360 h. In contrast, the corresponding normal device was relatively sensitive to this temperature, with a T80 value of only 45 h. The improved device performance (PCE, stability) arose as a result of the presence of EAI suppressing the crystallization of CH3NH3PbI3−xClx.

Graphical abstract: High-performance and high-durability perovskite photovoltaic devices prepared using ethylammonium iodide as an additive

Supplementary files

Article information

Article type
Paper
Submitted
01 mar 2015
Accepted
11 mar 2015
First published
11 mar 2015

J. Mater. Chem. A, 2015,3, 9271-9277

High-performance and high-durability perovskite photovoltaic devices prepared using ethylammonium iodide as an additive

H. Hsu, C. Chang, C. Chen, B. Jiang, R. Jeng and C. Cheng, J. Mater. Chem. A, 2015, 3, 9271 DOI: 10.1039/C5TA01563D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements