Luminescence properties of mixed-ligand MOFs containing fluorene scaffolds functionalized with isonicotinoyl arms

Andrea Delledonne a, Martina Orlandini a, Francesca Terenziani *a, Paolo Pio Mazzeo a, Alessia Bacchi a, Lucia Carlucci b, Angiolina Comotti c, Jacopo Perego c and Paolo Pelagatti *ad
aDepartment of Chemical Sciences, Life Sciences and Environmental Sustainability, University of Parma, Parco Area delle Scienze 17/A, 43124 Parma, Italy. E-mail: francesca.terenziani@unipr.it; paolo.pelagatti@unipr.it
bDepartment of Chemistry, Università degli Studi di Milano, via Golgi 19, 20133 Milano, Italy
cDepartment of Materials Science, University of Milano-Bicocca, via Roberto Cozzi 55, 20125 Milano, Italy
dInteruniversity Consortium Chemical Reactivity and Catalysis (CIRCC), via Celso Ulpiani 27, 70126 Bari, Italy

Received 27th January 2023 , Accepted 24th February 2023

First published on 28th February 2023


Abstract

Solvothermal reactions between three bis-pyridine-bis-amide ligands containing a fluorene scaffold bearing different substituents on the C9 position (CH2, 1; CMe2, 2; C[double bond, length as m-dash]O, 3) with 2,6-naphthalenedicarboxylic acid (H2ndca) and Zn(NO3)2·6H2O led to the isolation of three new microporous mixed-ligand MOFs (PUM310, containing 1; PUM310Me2, containing 2; PUM310CO, containing 3). The structural characterization conducted with X-ray quality single crystals revealed parallel polycatenated frameworks of thick layers in all cases, corresponding to the topological type 5,6L18. The entangled nets contain complete and truncated Zn-paddle wheels. In the truncated paddle wheel, a pyridine of the bis-amide linker has been replaced by a DMF molecule. Solvent removal leads to framework rearrangement, as evidenced by XRPD analysis performed on desolvated PUM310, with consequent framework shrinkage as also evidenced by volumetric adsorption analyses. The three MOFs are fluorescent in the solid state. The optical spectra are indicative of a Förster resonance energy transfer (FRET) involving ndca2− as an excitation energy donor and the bis-pyridine linkers as acceptors, with a FRET efficiency close to 100% in the case of PUM310CO.


Introduction

Although more than twenty years have passed since the pioneering work by Yaghi,1 metal–organic-frameworks (MOFs) are still attracting tremendous scientific interest due to their high crystallinity, high porosity and high modularity.2–4 MOFs are potentially porous coordination networks composed of metal nodes, often reported as secondary-building-units (SBUs), and polytopic linkers.5 The crystallinity of MOFs and the knowledge of their precise crystalline structure enable the design of new architectures and the development of new functional materials that make MOFs highly attractive in several applications, such as gas storage and separation,6–10 guest-inclusion,11–15 development of electronic materials,16,17 food18 and environmental19 control and heterogeneous catalysis.20–23 Among the physical properties that can be imparted to MOFs, luminescence covers a prominent role in the development of responsive crystalline materials. Indeed, luminescent MOFs (LMOFs), first reported in 2002,24 are well documented in the literature as sensors25–27 or as light emitters28–32 or for biological applications.33 Luminescence in MOFs can originate from extended π-conjugated organic linkers used to connect the different SBUs (linker-based fluorescence),26 or from the metal centers (metal-based fluorescence), when the SBUs are formed by suitable metal clusters30–32,34–37 or lanthanide ions.38 Alternatively, MOFs can become luminescent by hosting fluorescent guests into their intrinsically porous structure.39,40 Several examples of LMOFs are related to mixed-ligand MOFs.41,42 This class of multicomponent materials is derived from the simultaneous incorporation in the framework of two distinct linkers.43 It follows a widening of the number of functional groups that can be installed in the framework and, in turn, the number of architectures achievable by synthesis, with the possibility of finely tuning the properties of the final materials.44–48 In the last years, we have directed our attention to Zn-containing mixed-ligand MOFs where one of the two linkers is constituted by a polyaromatic scaffold functionalized with bis-isonicotinoyl arms (Scheme 1), while the other is a linear dicarboxylate linker, such as 4,4′-biphenyldicarboxylate or 2,6-naphthalenedicarboxylate. These MOFs, grouped under the acronym PUM (Parma University Materials), have shown propensity for inclusion of organic guests49–52 and CO2 adsorption.53
image file: d3ce00087g-s1.tif
Scheme 1 General structure of bis-isonicotinoyl linkers containing different polyaromatic scaffolds. The 2,7-fluorenyl scaffold contained in the linkers used for the construction of the MOFs described in this work is in blue.

Recently, we have reported on the solution and solid state luminescence properties of the three bis-isonicotinoyl linkers containing fluorene scaffolds 1–3 reported in Scheme 1.54 The results highlighted that although only the fluorenone derivative 3 was fluorescent in solution, all three linkers were fluorescent in the solid state. This prompted us to use the three linkers for the fabrication of mixed-ligand MOFs to investigate their luminescence properties in the solid state, making a comparison with the free linkers. In this paper, we analyze the results obtained from reacting 1–3 with Zn(NO3)2·6H2O and 2,6-naphthalenedicarboxylic acid in N,N-dimethylformamide (DMF), under solvothermal conditions. The solid state structures of the three new MOFs (PUM310, containing 1; PUM310Me2, containing 2; PUM310CO, containing 3) and their topologies are described, along with their thermal behavior and luminescence properties in the solid state.

Experimental

Materials and methods

All reagents and solvents were used as received. The bis-pyridyl-bis-amide ligands 1–3 were synthesized as previously reported.54

1H NMR spectra were recorded on a 400 or 300 MHz Bruker instrument after dissolution of the materials in one drop of CF3COOD (TFA) and dilution with (CD3)2SO (DMSO). Chemical shifts are reported in ppm relative to the solvent residual peak of deuterated DMSO (1H = 2.50 ppm). TGA analyses (sample mass approximately 1–3 mg) were conducted by means of a PerkinElmer TGA8000 instrument, using a Pt-crucible, with a temperature increment of 10 °C min−1 in the temperature range of 25–500 °C. The measurements were performed under ambient pressure with a nitrogen gas flow of 80 mL min−1. The maximum temperature was fixed at 500 °C to avoid any damage to the Pt-crucible, due to the presence of metals in the specimen. Elemental analyses were performed using a Thermo Fisher FlashSmart instrument, with gas-chromatographic separation.

Single crystal X-ray diffraction data were collected at Elettra Synchrotron (Trieste, Italy) beamline XRD1.55 Crystals were directly removed from DMF and data were collected at 100 K using an Oxford Cryostream system. Beamline spectra (produced by an NdBFe multipole wiggler) were monochromatized to 17.71 keV (0.700 Å) through a Si(111) double crystal monochromator and focused to obtain a beam size of 0.2 × 0.2 mm FWHM at the sample (photon flux = 1012–1013 ph s−1). Datasets were collected at 100 K (nitrogen stream supplied through an Oxford Cryostream 700) through the rotating crystal method. Diffraction data were indexed, integrated and scaled by using the software CrysAlis.56 Structures were solved by direct methods using SHELXT57 and refined by full-matrix least-squares on all F2 using SHELXL58 implemented in Olex2.2.59 For all structures, anisotropic displacement parameters were refined except for hydrogen atoms. Table 1 reports the crystal data collection and refinement results. ORTEP diagrams are reported in the ESI. Crystallographic data for the reported structures were deposited with the CCDC codes 2215000–2215002.

Table 1 Crystal data and structure refinement for PUM310, PUM310CO and PUM310Me2
Identification code PUM310 PUM310CO PUM310Me 2
Empirical formula C64H43N5O15Zn3·0.5(C3H7NO) C64H41N5O16Zn3 C132H93N10O30Zn6·3(C3H7NO)
Formula weight 1354.69 1332.13 2910.67
Temperature/K 100(2) 100(2) 100(2)
Crystal system Monoclinic Monoclinic Triclinic
Space group P21/c P21/c P[1 with combining macron]
a 32.28(6) 31.752(2) 17.6312(7)
b 17.76(3) 17.8208(5) 19.4232(4)
c 19.21(3) 19.1271(8) 31.8390(12)
α 90 90 104.948(3)
β 104.08(5) 105.392(6) 103.585(3)
γ 90 90 90.131(3)
Volume/Å3 10[thin space (1/6-em)]685(31) 10[thin space (1/6-em)]434.8(10) 10[thin space (1/6-em)]216.7(6)
Z 4 4 2
ρ calc/g cm−3 0.842 0.848 0.946
μ/mm−1 0.710 0.699 0.719
F(000) 2768.0 2712.0 2990.0
Crystal size/mm3 0.08 × 0.06 × 0.02 0.06 × 0.06 × 0.02 0.06 × 0.04 × 0.02
Radiation Synchrotron (λ = 0.700) Synchrotron (λ = 0.700) Synchrotron (λ = 0.700)
2Θ range for data collection/° 4.372 to 59.786 3.454 to 51.888 3.108 to 51.888
Index ranges −44 ≤ h ≤ 44 −39 ≤ h ≤ 39 −22 ≤ h ≤ 22
−24 ≤ k ≤ 24 −22 ≤ k ≤ 22 −23 ≤ k ≤ 23
−26 ≤ l ≤ 26 −23 ≤ l ≤ 23 −39 ≤ l ≤ 39
Reflections collected 461[thin space (1/6-em)]211 132[thin space (1/6-em)]861 65[thin space (1/6-em)]422
Independent reflections 30[thin space (1/6-em)]220 21[thin space (1/6-em)]230 38[thin space (1/6-em)]133
R int = 0.1433 R int = 0.1371 R int = 0.0410
R sigma = 0.0703 R sigma = 0.0778 R sigma = 0.0709
Data/restraints/parameters 30[thin space (1/6-em)]220/62/603 21[thin space (1/6-em)]230/620/633 38[thin space (1/6-em)]133/0/1057
Goodness-of-fit on F2 1.016 1.467 1.512
Final R indices [I ≥ 2σ(I)] R 1 = 0.1008 R 1 = 0.1563 R 1 = 0.1422
wR2 = 0.2929 wR2 = 0.4290 wR2 = 0.4017
Final R indices [all data] R 1 = 0.1671 R 1 = 0.2076 R 1 = 0.1688
wR2 = 0.3656 wR2 = 0.4615 wR2 = 0.4218
Largest diff. peak/hole/e Å−3 6.20/−1.81 6.01/−2.57 5.09/−2.14


UV-vis absorption spectra were recorded with a PerkinElmer Lambda650 spectrophotometer; fluorescence measurements were performed with an FLS1000 Edinburgh Instruments Fluorometer. Emission spectra of liquid samples were collected on diluted solutions, with an absorbance lower than 0.1. Solutions for spectroscopic measurements were prepared using spectrophotometric grade or HPLC grade solvents.

The spectroscopic analysis of solid samples required a careful preparation of the specimens: a small quantity of solid was ground in a mortar and then deposited mechanically on a quartz plate, creating an extremely thin layer. For absorption measurements, the samples thus prepared were directly placed into the sample holder of the Lambda 650 spectrophotometer; absorption spectra were collected in transmission mode, with the light beam directed perpendicularly through the sample, using air as a reference. For emission spectra, the thickness of the layers was reduced as much as possible to minimize inner-filter effects, considering the thickness acceptable when the excitation profile of ndca2− (the energy donor) was comparable with the absorption spectrum of pure H2ndca. In order to prevent the reflected light from propagating along the emission path, a front-face sample holder was used to collect the fluorescence spectra of the thin layers, and was rotated by 45° with respect to the excitation beam and tilted off the vertical. Moreover, potential artefacts due to scattering and stray light were removed by employing appropriate longpass filters in the emission path (the cut-off wavelength is indicated in the captions of the figures). Corrections for detector sensitivity and excitation intensity were applied to all the fluorescence and excitation spectra.

N2 adsorption isotherms at 77 K and CO2 adsorption isotherms at 195 K were collected up to 1 bar using a Micromeritics analyser ASAP2020 HD.

Synthesis of PUM310, PUM310CO and PUM310Me2

Syntheses of the coordination networks were conducted under solvothermal conditions dissolving 1–3 (0.05 mmol), 2,6-naphthalenedicarboxylic acid (H2ndca, 0.1 mmol, 21.6 mg) and Zn(NO3)2·6H2O (0.1 mmol, 29.7 mg) in 10 mL of DMF at room temperature in 20 mL screw-capped Pyrex-glass tubes. The mixture was sonicated until complete dissolution of the reagents, then the sealed tube was immersed in a silicon oil bath thermostated at 80 °C, for the time necessary to grow X-ray quality single crystals. Then, the tube was slowly cooled at room temperature, and the crystals were filtered off and washed with DMF (2 × 5 mL). To avoid degradation, the crystals were stored in DMF. Prior to analysis by 1H NMR and TGA, the crystals were gently passed over a filter paper to remove DMF from the surface of the crystals.
Synthesis of PUM310. Following the general procedure with ligand 1 (40.6 mg), the solution was heated for five days isolating yellow plate crystals. A %weight loss of 27.9% by TGA, in the interval of 30–100 °C, corresponds to 7 molecules of DMF. Decomposition occurs at temperatures of >400 °C. Elemental analysis calculated for C64H43N5O15Zn3·3(DMF): C, 57.03 (56.85); H, 4.20 (3.88); N, 7.29 (7.01), indicative of a partial loss of solvent during storage.
Synthesis of PUM310Me2. Following the general procedure with ligand 2 (43.4 mg), the solution was heated for four days isolating yellow plate crystals. A %weight loss of 16.07% by TGA, in the interval of 30–250 °C, corresponds to 7 molecules of DMF; decomposition temperature = >400 °C. Elemental analysis calculated for C132H93N10O30Zn6·3(DMF): C, 67.24 (66.85); H, 4.56 (4.36); N, 7.23 (7.11), indicative of a partial loss of solvent during storage.
Synthesis of PUM310CO. Following the general procedure with ligand 3 (42.0 mg), the solution was heated for four days isolating orange plate crystals. A %weight loss of 31.09% by TGA, in the interval of 30–250 °C, corresponds to 8 molecules of DMF; decomposition temperature = >400 °C. Elemental analysis calcd for C64H41N5O16Zn3·4(DMF): C, 56.19 (56.09); H, 4.28 (3.98); N, 7.76 (7.51), indicative of a partial loss of solvent during storage.

Results and discussion

Synthesis and structural characterization

The three bis-amide-bis-pyridine ligands 1–3 were reacted under solvothermal conditions with 2,6-naphthalenedicarboxylic acid (H2ndca) and zinc nitrate hexahydrate in DMF at 80 °C, as depicted in Fig. 1.
image file: d3ce00087g-f1.tif
Fig. 1 General scheme of the synthesis of a) PUM310, b) PUM310Me2 and c) PUM310CO. For each MOF, the view along the crystallographic b axis of the framework is reported, highlighting the reciprocal orientation of the fluorenyl ligand (and the amidic moieties) within the same net. Crystallographic disorder has been removed for the sake of clarity.

The reactions with 1 and 3 led to the isolation of yellow and orange crystals, corresponding to PUM310 and PUM310CO, respectively. The two MOFs are isostructural, crystallizing in the P21/c monoclinic space group. The content of the asymmetric units is very similar, differing only in the DMF content. In both cases, the asymmetric unit contains three independent Zn2+ ions, an L (L = 1 or 3) ligand, three ndca2− anions and a coordinated DMF molecule. A partially occupied DMF molecule H-bonded to an amide NH group was also observed in PUM310. Unmodelled residual electron density is ascribable to disordered molecules of DMF included in the cavities of the frameworks of PUM310 and PUM310CO, respectively. The 1HNMR spectra of the crystals of PUM310 and PUM310CO digested in a mixture of TFA-d and DMSO-d6 indicate the presence of about 10 and 8 molecules of DMF, respectively. TGA analysis showed a weight loss percentage of 27.9% and 31.09% in the interval of 30–250 °C for PUM310 and PUM310CO, respectively, corresponding to the departure of about 7 and 8 molecules of DMF. Although a perfect counting of the DMF molecules is difficult, we believe that the TGA data are more reliable, and then the general formulae of the two MOFs are [Zn3(1)(ndca)3(DMF)]n(DMF)6 and [Zn3(3)(ndca)3]n(DMF)8, respectively.

Decomposition of the frameworks occurred at temperatures higher than 400 °C. The reaction with 2 led to PUM310Me2, which crystallizes in the P[1 with combining macron] space group and it is isoreticular with PUM310 and PUM310CO (see Fig. 2). The content of the asymmetric unit is higher than in the other two cases due to the space group symmetry. Here in fact, there are six metal nuclei, six ndca2− anions each bridging two Zn2+ nuclei, two bis-amide ligands, two coordinated DMF molecules and other three modelled molecules of solvent included in the cavities of the framework.


image file: d3ce00087g-f2.tif
Fig. 2 a) Perspective view of the PUM310 framework along the crystallographic b axis. b and c) Different paddle wheel SBUs are represented as gray polyhedra while the organic ligands are reported in ball and stick style: O: red, N: blue, C: grey.

The 1HNMR spectrum of the crystals of PUM310Me2 digested in a mixture of TFA-d and DMSO-d6 indicates the presence of approximately 7 molecules of solvent. The approximate general formula is then [Zn6(2)2(ndca)6(DMF)2](DMF)5. The number of DMF molecules was confirmed by TGA analysis with a weight loss percentage of 16.07% in the interval of 30–250 °C. Framework decomposition occurred at temperatures higher than 400 °C. It is worth noting that methyl groups in 2 prevent the net disorder in PUM310Me2 which is instead evident for PUM310 and PUM310CO. In particular, ligand 3 in PUM310CO is heavily disordered with two mutually exclusive orientations of the amide groups, while ligand 1 in PUM310 keeps the same orientation of the amide groups. Like in other MOFs belonging to the PUM series containing ndca2−, in particular PUM210 and PUM210F,53 the frameworks of PUM310 and PUM310CO contain two different SBUs. One is constituted by a complete paddle wheel with the formula [Zn2(COO)4(L)2] (Fig. 2c), where the two metals coordinate four bridged carboxylate groups and two pyridines. The second SBU is a truncated paddle wheel with the formula [Zn2(COO)4(L)(DMF)], where an O-coordinated DMF molecule replaces a pyridine (Fig. 2b). The coordinated DMF molecule blocks the framework expansion along the a direction and the pillar motif is then limited to two L units (see Fig. 1). The two SBUs are a part of 2D sheets that form planes where the carboxylate ligands lie. These planes are then bridged by L linkers. The three structures show polycatenation, analogous to that found in PUM210F.53PUM310 shows channels having dimensions of 17.7 × 12.8 Å2, with the void percentage of the unit cell being 24.8%, corresponding to 2648 Å3 (calculated by the Solvent Accessible Surface function of Mercury), after the removal of disorder. PUM310CO, instead, shows channels having a section of 12 Å × 28 Å, with a unit cell void percentage of 24.3% corresponding to 2532 Å3 (calculated by the Solvent Accessible Surface function of Mercury), after the removal of disorder. Finally, PUM310Me2 has channels of 13 Å × 19 Å, corresponding to a unit cell void volume of 21.4%, equivalent to 2184 Å3 (calculated by the Solvent Accessible Surface function of Mercury), after the removal of disorder. Looking at the values of the void volumes of the cells, it turns out that the functionalization of C9 of the fluorenic core translates into a slight decrease of porosity, with PUM310 featuring the highest void volume.

Framework topology

The three structures reported here are built with 2-periodic 3D layers (2D thick sheets made of three-layers) which are parallel polycatenated (PCAT) to give an overall 3D entangled framework. From a topological point of view, the single thick layers are a binodal 5,6-connected net with point symbol (412·63)(48·62)2 and correspond to the topological type 5,6L18. They can be seen as a three-layer section of a pcu net whose thickness is about 58.6, 57.8 and 55.8 Å for PUM310, PUM310CO and PUM310Me2, respectively (computed by ToposPro60). The polycatenation occurs along the direction perpendicular to the thick layers, that is a for PUM310 and PUM310CO and c for PUM310Me2, with an offset approximately equal to the unit cell axis in that direction (ca. 32.28, 31.84 and 31.75 Å, respectively). The PCAT arrays in all three structures are characterized by a degree of catenation of 2 (Doc = 2) and an index of separation of 1 (Is = 1), that is, a single multilayer is interlaced with other two, the upper and lower nearest neighbors, and to separate in two halves the whole polycatenated framework, it is necessary to remove just one layer,61 as shown in Fig. 3.
image file: d3ce00087g-f3.tif
Fig. 3 Views of the simplified networks in (a) PUM310 and (b) PUM310Me2 showing the three-layer 2D sheets of the 5,6L18 topology and the parallel polycatenation with Doc = 2 and Is = 1. Shown on the right is the distortion of a single “double-cubic cage” in (c) PUM310, (d) PUM310CO and (e) PUM310Me2.

Results show that each cubic cage of the three-layer pcu cut (5,6L18) is interlaced with only one cage of the nearest neighbor layer. Differences between the three structures are related to the degree of distortion of the “double cubic cage” of the thick layers, with the more regular and the more distorted ones found, respectively, in PUM310 and PUM310Me2, while PUM310CO shows only slight distortion (see Fig. 3, right).

This trend seems to follow the steric hindrance of the fluorene scaffold and, as a consequence, the relative arrangement of the ligands in the structures is slightly different (Fig. S10). The polycatenation shown here (Doc = 2 and Is = 1) is frequently observed for both wavy and thick layers of different topologies;62,63 however, it is rarely found for layers of the uncommon 5,6L18 topological type.

To the best of our knowledge, this type of thick layer is present in some not polycatenated 2D hybrid perovskites64–66 and only in two coordination networks previously reported by some of the authors, which are PUM210F and Cu-PUM210F (CSD refcodes NILFEW and NILFIA53). These two networks are strictly related to those reported here, showing the same topology and polycatenation for the layers and differing in the nature of the pillaring ligand (F-bpba). Particularly interesting is the unique structure of PUM210 (NILFAS), containing the non-fluorinated bpba pillaring ligand, and it has been previously reported together with NILFEW and NILFIA.53 In this case, the thick 2D motifs are a four-layer pcu cut with a thickness of ca. 84.13 Å. The corresponding 2-periodic 3D net is 5,6-connected, with point symbol (412·63)(48·62) and 5,6L48 topology. The polycatenation occurs along the crystallographic c direction with an offset of about 31.06 Å resulting in Doc = 4 and Is = 2 (see Fig. 4).


image file: d3ce00087g-f4.tif
Fig. 4 View of the simplified networks in PUM210 (NILFAS) showing the four-layer 2D sheets of the 5,6L48 topology and the parallel polycatenation with Doc = 4 and Is = 2.

As can be seen from Fig. 4, differently from all the other discussed structures, here each cubic cage of a thick layer is interlaced with other two ones belonging to different layers. PUM210 is the first example of a coordination network with the 5,6L48 topology reported so far, and is one of the few examples of polycatenation with Doc and Is higher than, respectively, 2 and 1. The 5,6L48 topology has only been found in some not entangled 2D hybrid perovskites.64

The results discussed here confirm the easy occurrence of parallel polycatenation (PCAT) for 2-periodic 3D layers, such as the multiple pillared layer present in the PUM coordination networks. Moreover, the variation of the pillaring ligands in terms of length, steric hindrance and chemical functionalization allows the isolation of new topologies and types of polycatenation.

Stability of the framework upon activation

It is known that for application purposes, MOFs must be activated to remove the solvent molecules included in the cavities of their frameworks.67 This can be a particularly crucial step since removal of the included solvent can be accompanied by framework collapse with consequent closure of the pores. Due to the similarity of the three isolated frameworks, PUM310 was chosen as the representative to study the stability of the frameworks towards DMF removal. A close inspection of the TGA curve of PUM310 shows that 3 molecules of DMF are lost in the T range of 25–110 °C (weight loss = 12.15%), while other 3 depart between 110 °C and 210 °C (weight loss = 11.60%). Finally, between 210 °C and 250 °C, a weight loss of 3.96% indicates the departure of an additional DMF molecule. This multistep desolvation profile can be correlated with the increasing degree of interaction between the residual DMF molecules and the framework walls of the MOF. The first loss is ascribed to the departure of the DMF molecules disorderly distributed in the channels, while the other two losses are assigned to the extrusion of the DMF hydrogen-bonded to the framework and coordinated to the Zn of the incomplete SBU, respectively. Thermal activation under dynamic vacuum at a temperature of 100 °C gave severely damaged crystals, not suitable for single-crystal X-ray analysis, thus indicating the need to follow more gentle techniques. For this reason, a solvent-exchange protocol was followed. This involves the soaking of the crystals in two solvents with different low boiling points, such as acetone and dichloromethane. With both solvents, the soaking was maintained for 24 hours. Subsequently, the crystals were evacuated with a simple vacuum at low temperature (see the ESI for details). The TGA analysis of the activated crystals still showed a weight loss of 10.33%, corresponding to 2.5 molecules of DMF. Most likely, these correspond to the DMF molecules coordinated to zinc and to those strongly interacting with the amide groups of the framework. The activated crystals were subjected to X-ray diffraction analysis, revealing the formation of a new crystalline phase, hereinafter referred to as PUM310-a.

The single-crystal-to-single-crystal transformation from PUM310 to PUM310-a was accompanied by a relevant reduction of the cell volume, from 10[thin space (1/6-em)]682(31) Å3 to 3219(3) Å3, as expected because of the solvent removal. Unfortunately, the framework rearrangement led to damage of the crystals that were no longer suitable for a complete structural resolution. In an attempt to remove completely the included DMF, the soaking times in acetone and dichloromethane were increased to 48 and 72 hours, respectively. The exchanged crystals were then subjected to a heating ramp from 60 °C to 90 °C (within 1 hour). The TGA analysis conducted on the newly activated crystals, hereinafter referred to as PUM310-a′, showed a weight loss of 5.89%, corresponding to about one molecule of DMF. We assume that the residual DMF corresponds to that contained in the incomplete SBU. Thermal treatment led again to an excessive degradation of the crystals, which were no longer suitable for single crystal X-ray analysis. However, the XRPD trace of PUM310-a′ is indicative of a new crystalline phase, as inferred by the comparison with the calculated XRPD trace of PUM310 (see Fig. S11).

To gain indication of the porosity of the three new MOFs, volumetric adsorption analyses were conducted. Activated PUM310, PUM310Me2 and PUM310CO do not adsorb N2 at 77 K (see Fig. S12) whilst a CO2 uptake at 195 K of 3 mmol g−1 (12% weight) was detected for PUM310-a′ (see Fig. S13). This value leads to about 4 molecules per asymmetric unit and is significantly lower than the number of DMF molecules initially included, indicating a rearrangement of the framework upon activation, as already anticipated by XRPD analyses, which likely leads to a significant framework shrinkage.

Luminescence

The four organic ligands employed in the synthesis of PUM310, PUM310Me2 and PUM310CO are all fluorescent in the solid state. The spectroscopic properties of 1, 2 and 3 have been studied in depth in a recent work.54 The absorption and emission spectra of the H2ndca ligand in DMF and in the solid state are reported in the ESI (Fig. S14).

The three synthesized MOFs have been spectroscopically characterized by recording absorption, emission and excitation spectra directly in the solid state. The fluorescence emission spectra are shown in Fig. 5 together with the ones of the constituting organic ligands. For each MOF, the bands of the two employed ligands, ndca2− and either 1, 2, or 3, can be recognized in the emission spectra. The MOF emission band related to ndca2− is quite similar to the fluorescence spectrum of H2ndca in DMF, while the emission spectrum of H2ndca in the solid state is highly affected by aggregate/excimer formation (see the ESI). This is consistent with the ndca2− ligands being more spaced in the MOF's structure than in the H2ndca microcrystals. The emission bands of the fluorene-based ligands in PUM310 and PUM310Me2 are almost superimposed and are comparable to those of pure 2 in the solid state, but strongly red-shifted with respect to pure 1. The emission band of the fluorenone ligand is practically the same as those of PUM310CO, 3 as powder and 3 in DMF solution. The large difference between the emission spectra of PUM310 and 1 as a pure solid can be justified considering the crystal structure of this bis-isonicotinoyl ligand. From the structural data previously reported,54 molecules are closer in the crystal structure of 1 than in the crystal structure of 2 or in the corresponding MOF. Additionally, several CH–π interactions directly involving the fluorenyl cores were found in the case of pure 1, which are absent in the structure of PUM310 and, as expected due to the presence of two methyl groups in position C9, cannot be formed in the case of 2.


image file: d3ce00087g-f5.tif
Fig. 5 Comparison between the emission spectra of the three MOFs and of the constituting organic ligands in the solid state (1–3) or in solution (H2ndca). Top: Emission spectra of PUM310, PUM310Me2 and PUM310CO in the solid state. Bottom: Emission spectra of H2ndca and 3 solubilized in DMF and of 1–3 in the solid state. All the measurements on the solid samples were performed using a 330 nm longpass filter in the emission path. The excitation wavelength is reported in the legend.

A remarkable complication when measuring fluorescence emission and excitation spectra of solid samples comes from inner filter effects. The primary inner filter effect is related to a very strong absorption of the incident light by the surface of the sample that prevents the incoming light from reaching the inner parts of the sample; in excitation spectra, this can lead to strong deviations from the absorption profile, even observing minima at the wavelengths where maximum absorption occurs. The second inner filter effect is the self-absorption of the emitted light by the sample itself; this plays a major role when a significant overlap between the emission and absorption spectra is present, and leads to a “spurious” decrease of the emitted intensity in the spectral region overlapping the absorption band. For these reasons, the emission and excitation spectra of solid (or highly concentrated) samples are extremely sensitive to the thickness of the sample. In our measurements on the solid samples, we used extremely thin layers, so inner filter effects were minimized. The absorption spectra of the three MOFs and of the constituent organic ligands are reported in Fig. 7.

Contributions from both ndca2− and the corresponding bis-amide-bis-pyridine ligand are clearly present in the absorption spectra of the three materials. The absorption spectra of ligands 1–3 and the emission spectrum of H2ndca significantly overlap, making them compatible for Förster resonance energy transfer (FRET) (Fig. S15). Specifically, ndca2− could act as an excitation energy donor, while the three bis-amide-bis-pyridine ligands could act as acceptors. The structure of the MOFs is compatible with FRET, as the two involved ligands are kept in close proximity to each other by the framework structure. In particular, each bis-amide-bis-pyridine ligand can exchange energy with multiple ndca2− located within the same framework (Fig. 6) or in the nearest polycatenated ones.


image file: d3ce00087g-f6.tif
Fig. 6 Partial view of a framework node of PUM310CO.

The selective excitation of the energy donor (ndca2−) is not possible, because of the strong overlap of its absorption bands with those of the other ligands in the MOFs (Fig. 7, top panels). Therefore, to verify the occurrence of FRET, we acquired the fluorescence excitation spectra of the MOFs while selectively recording the emission from the acceptor ligand (either 1, 2 or 3) at 600 nm (Fig. 7, bottom part). The excitation spectra that we obtained for the three MOFs not only display the bands corresponding to the acceptor absorption (either 1, 2 or 3), but also display the bands corresponding to the donor absorption (ndca2−; the peak at ∼250 nm is very suggestive). In the specific case of PUM310CO, the relative intensity of the two contributions is the same as in the corresponding absorption spectrum, suggesting a FRET efficiency close to 100%.


image file: d3ce00087g-f7.tif
Fig. 7 Top: Comparison between the absorption spectra of PUM310, PUM310Me2, PUM310CO (continuous black lines), H2ndca (dashed violet lines), 1 (dashed blue line), 2 (dashed green line) and 3 (dashed orange line). Bottom: Comparison between the absorption spectra of PUM310, PUM310Me2, and PUM310CO and the corresponding excitation spectra obtained collecting the acceptor emission at 600 nm.

Conclusions

Three new frameworks belonging to the PUM series have been obtained by reacting Zn2+ ions with 2,6-naphthalenediacrboxylic acid and three diverse bis-pyridine-bis-amide pillars containing differently functionalized fluorene scaffolds. The type of substituent on the C9 carbon of the fluorene moiety has a little effect on the type of the final framework, and the three MOFs PUM310, PUM310Me2 and PUM310CO are isoreticular. Interestingly, as previously observed by us with other MOFs derived from the combination of 2,6-naphthalenedicarboxylic acid and biphenyl-based bis-pyridine-bis-amide ligands,53 the frameworks contain two different types of SBUs, corresponding to complete and truncated paddle wheel units. The three-dimensionality is then reached by parallel polycatenation. Although potentially microporous, the flexibility of the frameworks leads to a significant shrinkage of the pores upon desolvation, as evidenced by volumetric adsorption analysis. The framework distortion has been partly followed by X-ray diffraction analysis for PUM310, but unfortunately the damage to the crystal during solvent removal has prevented the elucidation of the desolvated structure. The three new MOFs are strongly fluorescent and show FRET from the dicarboxylate dianion to the bis-pyridine linkers, with high efficiencies, close to 100% in the case of PUM310CO. These light-harvesting and directional FRET features are promising for multiple sensing applications.

Abbreviations

bpbaBis-pyridine-biphenyl amide
DMF N,N-Dimethylformamide
FRETFörster resonance energy transfer
H2ndca2,6-Naphthalenedicarboxylic acid
PUMParma University Materials

Author contributions

The manuscript was written through contributions of all the authors. All the authors have given approval to the final version of the manuscript.

Conflicts of interest

There are no conflicts to declare.

Acknowledgements

MIUR project “Nature Inspired Crystal Engineering” (PRIN2020). Chiesi Farmaceutici SpA is thanked for providing the Bruker D8 Venture diffractometer at the Laboratorio di Strutturistica ‘M. Nardelli’ of the University of Parma. This work has benefited from the equipment and framework of the COMP-HUB Initiative, funded by the “Departments of Excellence” program of the Italian Ministry for Education, University and Research (MIUR, 2018–2022). The Centro Interdipartimentale di Misure “G. Casnati” is thanked for instrument facilities. Alessandro Pedrini (University of Parma) is thanked for BET analysis recording. Dr. Nicola Demitri is thanked for assistance during Elettra Synchrotron data collection.

Notes and references

  1. H. Li, M. Eddaoudi, M. O'Keeffe and O. M. Yaghi, Nature, 1999, 402, 276–279 CrossRef CAS .
  2. H. C. J. Zhou and S. Kitagawa, Chem. Soc. Rev., 2014, 43, 5415–5418 RSC .
  3. S. Kitagawa, R. Kitaura and S.-I. I. Noro, Angew. Chem., Int. Ed., 2004, 43, 2334–2375 CrossRef CAS PubMed .
  4. M. Eddaoudi, D. B. Moler, H. Li, B. Chen, T. M. Reineke, M. O'Keeffe and O. M. Yaghi, Acc. Chem. Res., 2001, 34, 319–330 CrossRef CAS PubMed .
  5. O. M. Yaghi, M. O'Keeffe, N. W. Ockwig, H. K. Chae, M. Eddaoudi and J. Kim, Nature, 2003, 423, 705–714 CrossRef CAS PubMed .
  6. R. B. Lin, Z. Zhang and B. Chen, Acc. Chem. Res., 2021, 54, 3362–3376 CrossRef CAS PubMed .
  7. G. Cai, P. Yan, L. Zhang, H. C. Zhou and H. L. Jiang, Chem. Rev., 2021, 121, 12278–12326 CrossRef CAS PubMed .
  8. L. Meng, K. Liu, S. Fu, L. Wang, C. Liang, G. Li, C. Li and Z. Shi, J. Solid State Chem., 2018, 265, 285–290 CrossRef CAS .
  9. W. Fan, X. Zhang, Z. Kang, X. Liu and D. Sun, Coord. Chem. Rev., 2021, 443, 213968 CrossRef CAS .
  10. S. H. Goh, H. S. Lau and W. F. Yong, Small, 2022, 2107536, 2107536 CrossRef PubMed .
  11. D. Balestri, D. Capucci, N. Demitri, A. Bacchi and P. Pelagatti, Materials, 2017, 10, 1–12 CrossRef PubMed .
  12. P. Horcajada, T. Chalati, C. Serre, B. Gillet, C. Sebrie, T. Baati, J. F. Eubank, D. Heurtaux, P. Clayette, C. Kreuz, J. S. Chang, Y. K. Hwang, V. Marsaud, P. N. Bories, L. Cynober, S. Gil, G. Férey, P. Couvreur and R. Gref, Nat. Mater., 2010, 9, 172–178 CrossRef CAS PubMed .
  13. J. Vaughn, H. Wu, B. Efremovska, D. H. Olson, J. Mattai, C. Ortiz, A. Puchalski, J. Li and L. Pan, Chem. Commun., 2013, 49, 5724–5726 RSC .
  14. P. P. Mazzeo, L. Maini, D. Braga, G. Valenti, F. Paolucci, M. Marcaccio, A. Barbieri and B. Ventura, Eur. J. Inorg. Chem., 2013, 4459–4465 CrossRef CAS .
  15. D. Capucci, D. Balestri, P. P. Mazzeo, P. Pelagatti, K. Rubini and A. Bacchi, Cryst. Growth Des., 2017, 17, 4958–4964 CrossRef CAS .
  16. J. Yan, T. Liu, X. Liu, Y. Yan and Y. Huang, Coord. Chem. Rev., 2022, 452, 214300 CrossRef CAS .
  17. N. Kulachenkov, Q. Haar, S. Shipilovskikh, A. Yankin, J. F. Pierson, A. Nominé and V. A. Milichko, Adv. Funct. Mater., 2022, 32, 1–16 CrossRef .
  18. P. L. Wang, L. H. Xie, E. A. Joseph, J. R. Li, X. O. Su and H. C. Zhou, Chem. Rev., 2019, 119, 10638–10690 CrossRef CAS PubMed .
  19. F. Bianchi, A. Pankajakshan, F. Fornari, S. Mandal, P. Pelagatti, A. Bacchi, P. P. Mazzeo and M. Careri, Microchem. J., 2020, 154, 1–7 CrossRef .
  20. J. De Tovar, F. Rataboul and L. Djakovitch, Appl. Catal., A, 2021, 627, 118381 CrossRef CAS .
  21. Q. Wang, G. Yang, Y. Fu, N. Li, D. Hao and S. Ma, ChemNanoMat, 2022, 8, 1–19 Search PubMed .
  22. C. G. Piscopo, M. Schwarzer, M. Herrmann, A. Affini, P. Pelagatti, G. Maestri, R. Maggi and S. Loebbecke, ChemCatChem, 2016, 8, 1293–1297 CrossRef CAS .
  23. D. Balestri, Y. Roux, M. Mattarozzi, C. Mucchino, L. Heux, D. Brazzolotto, V. Artero, C. Duboc, P. Pelagatti, L. Marchiò and M. Gennari, Inorg. Chem., 2017, 56, 14801–14808 CrossRef CAS PubMed .
  24. J. C. Dai, X. T. Wu, Z. Y. Fu, C. P. Cui, S. M. Hu, W. X. Du, L. M. Wu, H. H. Zhang and R. Q. Sun, Inorg. Chem., 2002, 41, 1391–1396 CrossRef CAS PubMed .
  25. M. Marimuthu, S. S. Arumugam, D. Sabarinathan, H. Li and Q. Chen, Trends Food Sci. Technol., 2021, 116, 1002–1028 CrossRef CAS .
  26. L. Chen, D. Liu, J. Peng, Q. Du and H. He, Coord. Chem. Rev., 2020, 404, 213113 CrossRef CAS .
  27. F. Fornari, F. Bianchi, N. Riboni, F. Casoli, A. Bacchi, P. P. Mazzeo, P. Pelagatti and M. Careri, J. Chromatogr. A, 2022, 1671, 463010 CrossRef CAS PubMed .
  28. K. A. White, D. A. Chengelis, M. Zeller, S. J. Geib, J. Szakos, S. Petoud and N. L. Rosi, Chem. Commun., 2009, 4506–4508 RSC .
  29. R. Li, S. H. Wang, Z. F. Liu, X. X. Chen, Y. Xiao, F. K. Zheng and G. C. Guo, Cryst. Growth Des., 2016, 16, 3969–3975 CrossRef CAS .
  30. L. Maini, D. Braga, P. P. Mazzeo, L. Maschio, M. Rérat, I. Manet and B. Ventura, Dalton Trans., 2015, 44, 13003–13006 RSC .
  31. D. Braga, L. Maini, P. P. Mazzeo and B. Ventura, Chem. – Eur. J., 2010, 16, 1553–1559 CrossRef CAS PubMed .
  32. F. Farinella, L. Maini, P. P. Mazzeo, V. Fattori, F. Monti and D. Braga, Dalton Trans., 2016, 45, 17939–17947 RSC .
  33. A. C. McKinlay, R. E. Morris, P. Horcajada, G. Férey, R. Gref, P. Couvreur and C. Serre, Angew. Chem., Int. Ed., 2010, 49, 6260–6266 CrossRef CAS PubMed .
  34. S. Z. Zhan, M. Li, X. P. Zhou, J. H. Wang, J. R. Yang and D. Li, Chem. Commun., 2011, 47, 12441–12443 RSC .
  35. D. Braga, F. Grepioni, L. Maini, P. P. Mazzeo and B. Ventura, New J. Chem., 2011, 35, 339–344 RSC .
  36. P. P. Mazzeo, L. Maini, A. Petrolati, V. Fattori, K. Shankland and D. Braga, Dalton Trans., 2014, 43, 9448–9455 RSC .
  37. L. Maini, D. Braga, P. P. Mazzeo and B. Ventura, Dalton Trans., 2012, 41, 531–539 RSC .
  38. J. Rocha, L. D. Carlos, F. A. A. Paz and D. Ananias, Chem. Soc. Rev., 2011, 40, 926–940 RSC .
  39. Q. R. Fang, G. S. Zhu, Z. Jin, Y. Y. Ji, J. W. Ye, M. Xue, H. Yang, Y. Wang and S. L. Qiu, Angew. Chem., Int. Ed., 2007, 46, 6638–6642 CrossRef CAS PubMed .
  40. J. An, C. M. Shade, D. A. Chengelis-Czegan, S. Petoud and N. L. Rosi, J. Am. Chem. Soc., 2011, 133, 1220–1223 CrossRef CAS PubMed .
  41. J. Perego, I. Villa, A. Pedrini, E. C. Padovani, R. Crapanzano, A. Vedda, C. Dujardin, C. X. Bezuidenhout, S. Bracco, P. E. Sozzani, A. Comotti, L. Gironi, M. Beretta, M. Salomoni, N. Kratochwil, S. Gundacker, E. Auffray, F. Meinardi and A. Monguzzi, Nat. Photonics, 2021, 15, 393–400 CrossRef CAS .
  42. J. Perego, C. X. Bezuidenhout, I. Villa, F. Cova, R. Crapanzano, I. Frank, F. Pagano, N. Kratochwill, E. Auffray, S. Bracco, A. Vedda, C. Dujardin, P. E. Sozzani, F. Meinardi, A. Comotti and A. Monguzzi, Nat. Commun., 2022, 13, 1–10 Search PubMed .
  43. M. Du, C. P. Li, C. Sen Liu and S. M. Fang, Coord. Chem. Rev., 2013, 257, 1282–1305 CrossRef CAS .
  44. S. Pullen and G. H. Clever, Acc. Chem. Res., 2018, 51, 3052–3064 CrossRef CAS PubMed .
  45. B. Qin, X. Zhang, J. Qiu, G. Gahungu, H. Yuan and J. Zhang, Inorg. Chem., 2021, 60, 1716–1725 CrossRef CAS PubMed .
  46. B. Parmar, K. K. Bisht, Y. Rachuri and E. Suresh, Inorg. Chem. Front., 2020, 7, 1082–1107 RSC .
  47. Z. F. Qiu, S. M. Zhao, Z. H. Xu, Y. Zhao, Z. L. Wang and W. Y. Sun, Cryst. Growth Des., 2021, 21, 5306–5316 CrossRef CAS .
  48. S. S. Chen, S. S. Han, C. B. Ma, W. D. Li and Y. Zhao, Cryst. Growth Des., 2021, 21, 869–885 CrossRef CAS .
  49. P. P. Mazzeo, D. Balestri, A. Bacchi and P. Pelagatti, CrystEngComm, 2021, 23, 7262–7269 RSC .
  50. D. Balestri, P. P. Mazzeo, R. Perrone, F. Fornari, F. Bianchi, M. Careri, A. Bacchi and P. Pelagatti, Angew. Chem., Int. Ed., 2021, 60, 10194–10202 CrossRef CAS PubMed .
  51. D. Balestri, P. P. Mazzeo, C. Carraro, N. Demitri, P. Pelagatti and A. Bacchi, Angew. Chem., Int. Ed., 2019, 58, 17342–17350 CrossRef CAS PubMed .
  52. D. Balestri, P. Scilabra, C. Carraro, A. Delledonne, A. Bacchi, P. P. Mazzeo, L. Carlucci and P. Pelagatti, CrystEngComm, 2019, 21, 6365–6373 RSC .
  53. D. Balestri, I. Bassanetti, S. Canossa, C. Gazzurelli, A. Bacchi, S. Bracco, A. Comotti and P. Pelagatti, Cryst. Growth Des., 2018, 18, 6824–6832 CrossRef CAS .
  54. A. Delledonne, M. Orlandini, P. P. Mazzeo, C. Sissa, A. Bacchi, F. Terenziani and P. Pelagatti, Phys. Chem. Chem. Phys., 2022, 24, 1191–1201 RSC .
  55. A. Lausi, M. Polentarutti, S. Onesti, J. R. Plaisier, E. Busetto, G. Bais, L. Barba, A. Cassetta, G. Campi and D. Lamba, Eur. Phys. J. Plus, 2015, 130(43), 1–8 Search PubMed .
  56. CrysAlisPRO, Oxford Diffraction/Agilent Technologies, UK Ltd, Yarnton, England, 2008 Search PubMed .
  57. G. M. Sheldrick, Acta Crystallogr., Sect. A: Found. Crystallogr., 2015, 71, 3–8 CrossRef PubMed .
  58. G. M. Sheldrick, Acta Crystallogr., Sect. C: Struct. Chem., 2015, 71, 3–8 Search PubMed .
  59. O. V. Dolomanov, L. J. Bourhis, R. J. Gildea, J. A. K. Howard and H. Puschmann, J. Appl. Crystallogr., 2009, 42, 339–341 CrossRef CAS .
  60. V. A. Blatov, A. P. Shevchenko and D. M. Proserpio, Cryst. Growth Des., 2014, 14, 3576–3586 CrossRef CAS .
  61. L. Carlucci, G. Ciani and D. M. Proserpio, Coord. Chem. Rev., 2003, 246, 247–289 CrossRef CAS .
  62. L. Carlucci, G. Ciani, D. M. Proserpio, T. G. Mitina and V. A. Blatov, Chem. Rev., 2014, 114, 7557–7580 CrossRef CAS PubMed .
  63. E. V. Alexandrov, V. A. Blatov and D. M. Proserpio, CrystEngComm, 2017, 19, 1993–2006 RSC .
  64. X. Li, J. Hoffman, W. Ke, M. Chen, H. Tsai, W. Nie, A. D. Mohite, M. Kepenekian, C. Katan, J. Even, M. R. Wasielewski, C. C. Stoumpos and M. G. Kanatzidis, J. Am. Chem. Soc., 2018, 140, 12226–12238 CrossRef CAS PubMed .
  65. Z. Xu, W. Weng, Y. Li, X. Liu, T. Yang, M. Li, X. Huang, J. Luo and Z. Sun, Angew. Chem., Int. Ed., 2020, 59, 21693–21697 CrossRef CAS PubMed .
  66. L. Li, X. Liu, C. He, S. Wang, C. Ji, X. Zhang, Z. Sun, S. Zhao, M. Hong and J. Luo, J. Am. Chem. Soc., 2020, 142, 1159–1163 CrossRef CAS PubMed .
  67. J. E. Mondloch, O. Karagiaridi, O. K. Farha and J. T. Hupp, CrystEngComm, 2013, 15, 9258–9264 RSC .

Footnote

Electronic supplementary information (ESI) available: 1H NMR spectra of the digested MOFs, TGA traces of pristine MOFs, ORTEP drawings, XRPD trace of PUM310 after activation, views of the catenated cubic cages, BET analysis, absorption and emission profiles of H2ndca and solid state absorption of ligands 1–3. CCDC 2215000–2215002. For ESI and crystallographic data in CIF or other electronic format see DOI: https://doi.org/10.1039/d3ce00087g

This journal is © The Royal Society of Chemistry 2023
Click here to see how this site uses Cookies. View our privacy policy here.