Use of some cost-effective technologies for a routine clinical pathology laboratory

Mercedes Vázquez, Laura Anfossi, Hadar Ben-Yoav, Lorena Diéguez, Thomas Karopka, Bartolomeo Della Ventura, Sara Abalde-Cela, Antonio Minopoli, Fabio Di Nardo, Vikas Kumar Shukla, Alexandra Teixeira, Asta Tvarijonaviciute and Lorena Franco-Martínez

Lab Chip, 2021, 21, 4330
DOI: 10.1039/D1LC00658D

A simple polystyrene microfluidic device for sensitive and accurate SERS-based detection of infection by malaria parasites

Maria João Oliveira, Soraia Caetano, Ana Dalot, Filipe Sabino, Tomás R. Calmeiro, Elvira Fortunato, Rodrigo Martins, Eulália Pereira, Miguel Prudêncio, Hugh J. Byrne, Ricardo Franco and Hugo Águas

Analyst, 2023, 148, 4053
DOI: 10.1039/D3AN00971H

Aqueous two-phase system antibody confinement enables cost-effective analysis of protein analytes by sandwich enzyme-linked immunosorbent assay with minimal optical crosstalk

Maia Kvas, Alyne G. Teixeira, Beatrice Chiang and John P. Frampton

Analyst, 2020, 145, 5458
DOI: 10.1039/D0AN00699H

3D printed imaging platform for portable cell counting

Diwakar M. Awate, Cicero C. Pola, Erica Shumaker, Carmen L. Gomes and Jaime J. Juárez

Analyst, 2021, 146, 4033
DOI: 10.1039/D1AN00778E

3D-Printed Microfluidics and Potential Biomedical Applications

Priyanka Prabhakar, Raj Kumar Sen, Neeraj Dwivedi, Raju Khan, Pratima R. Solanki, Avanish Kumar Srivastava and Chetna Dhand

Front. Nanotechnol., 2021, 3
DOI: 10.3389/fnano.2021.609355

3D Printed Microfluidics

Anna V. Nielsen, Michael J. Beauchamp, Gregory P. Nordin and Adam T. Woolley

Annual Rev. Anal. Chem., 2020, 13, 45
DOI: 10.1146/annurev-anchem-091619-102649

ECL-CRISPR Array for Multiplexed Detection of miRNAs

Keshani Hiniduma, P.I.Thilini De Silva, Rachelle Canete, Palash Vora, Hansana Gunathillaka, Oscar Clement, Sherif M. Shawky, Jessica L. Rouge, Islam M. Mosa, David C. Steffens, Kevin Manning, Diniz Breno and James F. Rusling

Biosensors and Bioelectronics, 2025, 117855
DOI: 10.1016/j.bios.2025.117855

Microfluidic SERS devices: brightening the future of bioanalysis

Maria João Oliveira, Ana Dalot, Elvira Fortunato, Rodrigo Martins, Hugh J. Byrne, Ricardo Franco and Hugo Águas

Discov Mater, 2022, 2
DOI: 10.1007/s43939-022-00033-3

Recent Developments in 3D Printing of Droplet-Based Microfluidics

Adedamola D. Aladese and Heon-Ho Jeong

BioChip J, 2021, 15, 313
DOI: 10.1007/s13206-021-00032-1

Design and Fabrication of a 3D-Printed Microfluidic Immunoarray for Ultrasensitive Multiplexed Protein Detection

Keshani Hiniduma, Ketki S. Bhalerao, Peyahandi I. Thilini De Silva, Tianqi Chen and James F. Rusling

Micromachines, 2023, 14, 2187
DOI: 10.3390/mi14122187

Multiplexed Immunosensors and Immunoarrays

Abby Jones, Lasangi Dhanapala, Rumasha N. T. Kankanamage, Challa V. Kumar and James F. Rusling

Anal. Chem., 2020, 92, 345
DOI: 10.1021/acs.analchem.9b05080

A 3D Printed Jet Mixer for Centrifugal Microfluidic Platforms

Yunxia Wang, Yong Zhang, Zheng Qiao and Wanjun Wang

Micromachines, 2020, 11, 695
DOI: 10.3390/mi11070695

Protein and Proteome Measurements with Microfluidic Chips

Iulia M. Lazar, Nicholas S. Gulakowski and Alexandru C. Lazar

Anal. Chem., 2020, 92, 169
DOI: 10.1021/acs.analchem.9b04711

3D-printed fluidic electrochemical microcell for sequential injection/stripping analysis of heavy metals

Anastasia Βaltima, Heleni Panagopoulou, Anastasios Economou and Christos Kokkinos

Analytica Chimica Acta, 2021, 1159, 338426
DOI: 10.1016/j.aca.2021.338426

Ultrasensitive multiplexed detection of cancer biomarker proteins using SPR imaging

Gulsum Ucak-Ozkaya, M. Zeki Durak, Mohamed Sharafeldin and James F. Rusling

Microchemical Journal, 2025, 216, 114562
DOI: 10.1016/j.microc.2025.114562

Accessible Telemedicine Diagnostics with ELISA in a 3D Printed Pipette Tip

Mohamed Sharafeldin, Karteek Kadimisetty, Ketki R. Bhalerao, Itti Bist, Abby Jones, Tianqi Chen, Norman H. Lee and James F. Rusling

Anal. Chem., 2019, 91, 7394
DOI: 10.1021/acs.analchem.9b01284

Can 3D Printing Bring Droplet Microfluidics to Every Lab?—A Systematic Review

Nafisat Gyimah, Ott Scheler, Toomas Rang and Tamas Pardy

Micromachines, 2021, 12, 339
DOI: 10.3390/mi12030339

Open-source interactive design platform for 3D-printed microfluidic devices

Yushen Zhang, Mengchu Li, Tsun-Ming Tseng and Ulf Schlichtmann

Commun Eng, 2024, 3
DOI: 10.1038/s44172-024-00217-0

Single-step fabrication of electrochemical flow cells utilizing multi-material 3D printing

Glen D. O'Neil, Shakir Ahmed, Kevin Halloran, Jordyn N. Janusz, Alexandra Rodríguez and Irina M. Terrero Rodríguez

Electrochemistry Communications, 2019, 99, 56
DOI: 10.1016/j.elecom.2018.12.006

3D-Printed Immunosensor Arrays for Cancer Diagnostics

Mohamed Sharafeldin, Karteek Kadimisetty, Ketki S. Bhalerao, Tianqi Chen and James F. Rusling

Sensors, 2020, 20, 4514
DOI: 10.3390/s20164514