Issue 22, 2025

Design, implementation and piloting of an integrated hydrogen- and oxygen-added process for conversion of biogas to methanol

Abstract

An integrated biogas-to-methanol (B2M) conversion system combining autothermal reforming (ATR) with regenerative methanol (MeOH) synthesis, integrating both oxygen (O2) and hydrogen (H2) from water electrolysis, is designed, commissioned and investigated operationally. The pilot plant is operated under real world conditions at a wastewater treatment plant in western Germany to demonstrate the process using sewage-derived biogas and to investigate its applicability and suitability for decentralized, efficient value-added bio-chemical production from renewable feedstock. The studies conducted at the test plant evaluate system effectiveness by optimizing operational parameters for both ATR (steam-to-carbon ratio [S/C], oxygen-to-fuel ratio [λ]) and the methanol (MeOH) synthesis process (stoichiometric number [SN], reaction temperature and gas space velocity [GHSV]). Additionally, stable start-up procedures are developed for reliable operation under dynamic conditions, as is expectable in industrial process application. To compare different MeOH synthesis pathways, regenerative synthesis gas-based MeOH-production is set against direct CO2-to-MeOH conversion. Results demonstrate that ATR of biogas produces CO2-rich synthesis gas (SynGas) with excellent methane (CH4) conversion and extremely low soot formation at relatively low reforming temperatures below 750 °C. Although the high CO2-content reformate requires substantial H2 injection for stoichiometric MeOH synthesis SynGas conditions, the H2-enhanced SynGas route proves superior to CO2-only operation of the pilot plant, highlighting possible synergies in oxygen-injected ATR and MeOH-synthesis applications. The combined ATR-H2-injection approach yields higher MeOH yields with reduced water formation and improved conversion. The findings from this study support the technical feasibility of the integrated B2M-system and provide operational foundations for economically viable decentralized MeOH-production at biogas facilities and future system scale-up.

Graphical abstract: Design, implementation and piloting of an integrated hydrogen- and oxygen-added process for conversion of biogas to methanol

Supplementary files

Transparent peer review

To support increased transparency, we offer authors the option to publish the peer review history alongside their article.

View this article’s peer review history

Article information

Article type
Paper
Submitted
15 May 2025
Accepted
26 Aug 2025
First published
30 Sep 2025
This article is Open Access
Creative Commons BY-NC license

Sustainable Energy Fuels, 2025,9, 6199-6215

Design, implementation and piloting of an integrated hydrogen- and oxygen-added process for conversion of biogas to methanol

C. Fritsch, J. Blankenstein, B. Bender, J. Dornseiffer, M. Haep and K. Ooms, Sustainable Energy Fuels, 2025, 9, 6199 DOI: 10.1039/D5SE00691K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements