In situ crystal engineering on 3D-printed woodpile scaffolds: a monolith catalyst with highly accessible active sites for enhanced catalytic cracking

Ruoyu Wang, Yixuan Gong, Peng Wang, Wenhui He, Ye Song, Mudi Xin, Qiuqiao Jiang, Yuchen Sha, Tiantian Cao, Haitao Song and Wei Lin

J. Mater. Chem. A, 2023, 11, 13945
DOI: 10.1039/D3TA01645E

Recent advances and prospects of inkjet printing in heterogeneous catalysis

Hesam Maleki and Volfango Bertola

Catal. Sci. Technol., 2020, 10, 3140
DOI: 10.1039/D0CY00040J

Surface functionalized 3D printed metal structures as next generation recyclable SERS substrates

Uzma Malik, Roxanne Hubesch, Paramita Koley, Maciej Mazur, Sunil Mehla, Sai Kishore Butti, Milan Brandt, P. R. Selvakannan and Suresh Bhargava

Chem. Commun., 2023, 59, 13406
DOI: 10.1039/D3CC04154A

3D printed nickel catalytic static mixers made by corrosive chemical treatment for use in continuous flow hydrogenation

Milan Kundra, Yutong Zhu, Xuan Nguyen, Darren Fraser, Christian H. Hornung and John Tsanaktsidis

React. Chem. Eng., 2022, 7, 284
DOI: 10.1039/D1RE00456E

Zeolites on 3D-printed open metal framework structure: metal migration into zeolite promoted catalytic cracking of endothermic fuels for flight vehicles

Roxanne Hubesch, Maciej Mazur, Karl Föger, P. R. Selvakannan and Suresh K. Bhargava

Chem. Commun., 2021, 57, 9586
DOI: 10.1039/D1CC04246G

From 3D to 4D printing: a reactor for photochemical experiments using hybrid polyurethane acrylates for vat-based polymerization and surface functionalization

Anne Hansen, Melissa Renner, Axel G. Griesbeck and Thomas Büsgen

Chem. Commun., 2020, 56, 15161
DOI: 10.1039/D0CC06512A

Additive manufacturing of microstructured reactors for organometallic catalytic reactions

Franco Otaola, Stéphane Mottelet, Erwann Guénin, Denis Luart and Mikel Leturia

Lab Chip, 2023, 23, 702
DOI: 10.1039/D2LC00816E

Recent advances in inkjet-printing technologies for flexible/wearable electronics

Yu Liu, Hongze Zhu, Lei Xing, Qingkai Bu, Dayong Ren and Bin Sun

Nanoscale, 2023, 15, 6025
DOI: 10.1039/D2NR05649F

Printing approaches to inorganic semiconductor photocatalyst fabrication

Donia Friedmann, Adam F. Lee, Karen Wilson, Rouhollah Jalili and Rachel A. Caruso

J. Mater. Chem. A, 2019, 7, 10858
DOI: 10.1039/C9TA00888H

Flexural elasticity of woodpile lattice beams

Enrique Cuan-Urquizo and Atul Bhaskar

European Journal of Mechanics - A/Solids, 2018, 67, 187
DOI: 10.1016/j.euromechsol.2017.09.008

First demonstration of photoelectrochemical water splitting by commercial W–Cu powder metallurgy parts converted to highly porous 3D WO3/W skeletons

Majdoddin Mojaddami and Abdolreza Simchi

International Journal of Hydrogen Energy, 2020, 45, 6369
DOI: 10.1016/j.ijhydene.2019.12.131

Influence of Internal and External Surface Area on Impregnation and Activity of 3d Printed Catalyst Carriers

Paula F. Großmann, Markus Tonigold, Normen Szesni, Richard W. Fischer, Alexander Seidel, Klaus Achterhold, Franz Pfeiffer and Bernhard Rieger

SSRN Journal, 2022
DOI: 10.2139/ssrn.4201213

Optimization of 3D Printing Parameters for Alumina Ceramic Based on the Orthogonal Test

Shuo Wang, Yongsheng Xiang, Hui Feng, Yanjun Cui, Xiaofei Liu, Xiaoxin Chang, Jinxiu Guo and Peng Tu

ACS Omega, 2024, 9, 16734
DOI: 10.1021/acsomega.4c00819

Applied research on methane steam reforming properties of porous structural catalyst fabricated by selective laser melting technology

Xinghua Liang, Mingzhao Wei, Dongdong Dong, LingXiao Lan, Ge Yan, Xingchen Yan, Yujiang Wang, Jianglong Yi, Cheng Chang and Min Liu

Mater. Res. Express, 2024, 11, 016521
DOI: 10.1088/2053-1591/ad1ef8

Intensification strategies for improving the performance of photocatalytic processes: A review

Dânia S.M. Constantino, Madalena M. Dias, Adrián M.T. Silva, Joaquim L. Faria and Cláudia G. Silva

Journal of Cleaner Production, 2022, 340, 130800
DOI: 10.1016/j.jclepro.2022.130800

Polymer–Nickel Composite Filaments for 3D Printing of Open Porous Materials

Ewelina Mackiewicz, Tomasz Wejrzanowski, Bogusława Adamczyk-Cieślak and Graeme J. Oliver

Materials, 2022, 15, 1360
DOI: 10.3390/ma15041360

3D printed electrodes design and voltammetric response

William B. Veloso, Thiago R.L.C. Paixão and Gabriel N. Meloni

Electrochimica Acta, 2023, 449, 142166
DOI: 10.1016/j.electacta.2023.142166

3D-printable scaffolds via DIW from ceramic pastes of ZnO nanoparticles without organic binders and their application as reusable photocatalysts for the degradation of Bisphenol A

Andrea Y. Cárcamo-Gutiérrez, Manuel Alejandro Ávila-López, Tania E. Lara-Ceniceros and José Bonilla-Cruz

Journal of the European Ceramic Society, 2025, 45, 117578
DOI: 10.1016/j.jeurceramsoc.2025.117578

3D printed catalytic reactors for aerobic selective oxidation of benzyl alcohol into benzaldehyde in continuous multiphase flow

Clément Jacquot, Vesna Middelkoop, Angela Köckritz, Andrej Pohar, Regina Bienert, Suela Kellici, Ioan-Alexandru Bărăgău, Baldassarre Venezia, Asterios Gavriilidis, Blaz Likozar and Andrew M. Beale

Sustainable Materials and Technologies, 2021, 30, e00329
DOI: 10.1016/j.susmat.2021.e00329

Titanosilicate Epoxidation Catalysts: A Review of Challenges and Opportunities

Valentin Smeets, Eric M. Gaigneaux and Damien P. Debecker

ChemCatChem, 2022, 14
DOI: 10.1002/cctc.202101132

A critical review on 3D-printed adsorbents, membranes, and catalysts for carbon dioxide capture, separation, and conversion

Kedar Bharat Jivrakh, Suresh Kuppireddy, Ludovic F. Dumée, Kyriaki Polychronopoulou, Rashid K. Abu Al-Rub, Nahla Alamoodi and Georgios N. Karanikolos

Journal of Cleaner Production, 2024, 472, 143522
DOI: 10.1016/j.jclepro.2024.143522

Process intensification and energy transition: A necessary coupling?

Emanuele Moioli

Chemical Engineering and Processing - Process Intensification, 2022, 179, 109097
DOI: 10.1016/j.cep.2022.109097

A 3D Printer in the Lab: Not Only a Toy

Vittorio Saggiomo

Advanced Science, 2022, 9
DOI: 10.1002/advs.202202610

Potential of 3D Printing for Heat Exchanger Heat Transfer Optimization—Sustainability Perspective

Beata Anwajler

Inventions, 2024, 9, 60
DOI: 10.3390/inventions9030060

Elements of the Manufacture and Properties of Technical Catalysts

Julieth T. García-Sánchez and Víctor G. Baldovino-Medrano

Ind. Eng. Chem. Res., 2023, 62, 7769
DOI: 10.1021/acs.iecr.3c00369

Recent Advances in 3D Printing of Structured Materials for Adsorption and Catalysis Applications

Shane Lawson, Xin Li, Harshul Thakkar, Ali A. Rownaghi and Fateme Rezaei

Chem. Rev., 2021, 121, 6246
DOI: 10.1021/acs.chemrev.1c00060

Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds

Manuel Alejandro Ávila-López, Tania E. Lara-Ceniceros, Francisco Enrique Longoria, Alfredo Aguilar Elguezabal, Azael Martínez de la Cruz, M. A. Garza-Navarro and José Bonilla-Cruz

ACS Appl. Nano Mater., 2022, 5, 11437
DOI: 10.1021/acsanm.2c02498

3D printing in analytical chemistry: current state and future

Pavel N. Nesterenko

Pure and Applied Chemistry, 2020, 92, 1341
DOI: 10.1515/pac-2020-0206

Chemistry from 3D printed objects

Matthew R. Hartings and Zeeshan Ahmed

Nat Rev Chem, 2019, 3, 305
DOI: 10.1038/s41570-019-0097-z

Tuning the Mechanical Properties of 3D‐printed Objects by the RAFT Process: From Chain‐Growth to Step‐Growth

Xiaofeng Pan, Jiajia Li, Zhuang Li, Qing Li, Xiangqiang Pan, Zhengbiao Zhang and Jian Zhu

Angewandte Chemie, 2024, 136
DOI: 10.1002/ange.202318564

Metal 3D printing technology for functional integration of catalytic system

Qinhong Wei, Hangjie Li, Guoguo Liu, Yingluo He, Yang Wang, Yen Ee Tan, Ding Wang, Xiaobo Peng, Guohui Yang and Noritatsu Tsubaki

Nat Commun, 2020, 11
DOI: 10.1038/s41467-020-17941-8

Current scenario and prospects in manufacture strategies for glass, quartz, polymers and metallic microreactors: A comprehensive review

M. Isabel Domínguez, Miguel A. Centeno, Marcela Martínez T., Luis F. Bobadilla, Óscar H. Laguna and José A. Odriozola

Chemical Engineering Research and Design, 2021, 171, 13
DOI: 10.1016/j.cherd.2021.05.001

Binder-jetting 3D printer capable of voxel-based control over deposited ink volume, adaptive layer thickness, and selective multi-pass printing

E. Persembe, C. Parra-Cabrera, C. Clasen and R. Ameloot

Review of Scientific Instruments, 2021, 92
DOI: 10.1063/5.0072715

Development of novel additive manufactured hybrid architected materials and investigation of their mechanical behavior

Nikolaos Kladovasilakis, Konstantinos Tsongas and Dimitrios Tzetzis

Mechanics of Materials, 2023, 176, 104525
DOI: 10.1016/j.mechmat.2022.104525

Colloidal carbon soot templated TiO2/Ag surface functionalized 3D printed metal brushes as new generation surface enhanced Raman scattering substrates

Uzma Malik, Maciej Mazur, Ravindra D. Gudi, Dharmendra D. Mandaliya, PR. Selvakannan and Suresh K. Bhargava

Journal of Colloid and Interface Science, 2024, 671, 325
DOI: 10.1016/j.jcis.2024.05.181

Comparison of Direct Ink Writing and Binder Jetting for additive manufacturing of Pt/Al2O3 catalysts for the dehydrogenation of perhydro-dibenzyltoluene

Hanh My Bui, Paula F. Großmann, Anne Berger, Alexander Seidel, Markus Tonigold, Normen Szesni, Richard Fischer, Bernhard Rieger and Olaf Hinrichsen

Chemical Engineering Journal, 2023, 458, 141361
DOI: 10.1016/j.cej.2023.141361

Design of additively manufactured methanol conversion reactor for high throughput production

Dongsheng Li, Tom Maloney, Nasir Mannan and Seyed Niknam

Mat Design & Process Comms, 2021, 3
DOI: 10.1002/mdp2.143

High photocatalytic efficiency of inkjet printed patterns by formulation of eco-friendly TiO2-based inks

J. Yus, Z. Gonzalez, A.J. Sanchez-Herencia, A. Sangiorgi, A. Sanson, C. Galassi and B. Ferrari

Open Ceramics, 2021, 8, 100197
DOI: 10.1016/j.oceram.2021.100197

A review on additive manufacturing and materials for catalytic applications: Milestones, key concepts, advances and perspectives

O.H. Laguna, P.F. Lietor, F.J. Iglesias Godino and F.A. Corpas-Iglesias

Materials & Design, 2021, 208, 109927
DOI: 10.1016/j.matdes.2021.109927

Multidisciplinary Design Analysis for Wash-Coating of Additively Manufactured Metallic Monoliths

Fatemeh Mehdipour, Christoph Klahn and Roland Dittmeyer

Procedia CIRP, 2024, 128, 478
DOI: 10.1016/j.procir.2024.04.012

Regular Microstructured Elements for Intensification of Gas–Liquid Contacting Made by Selective Laser Melting

Fabian Grinschek, Dongxu Xie, Michael Klumpp, Manfred Kraut, Edgar Hansjosten and Roland Dittmeyer

Ind. Eng. Chem. Res., 2020, 59, 3736
DOI: 10.1021/acs.iecr.9b04548

Review of 3D printing in photocatalytic substrates and catalysts

Nannan Li, Kai Tong, Lijun Yang and Xiaoze Du

Materials Today Energy, 2022, 29, 101100
DOI: 10.1016/j.mtener.2022.101100

Fabrication of metal-organic framework architectures with macroscopic size: A review

Javier Fonseca and Tenghua Gong

Coordination Chemistry Reviews, 2022, 462, 214520
DOI: 10.1016/j.ccr.2022.214520

Robocasting of ordered mesoporous silica‐based monoliths: Rheological, textural, and mechanical characterization

Emiliano S. Dal Molin, Laura M. Henning, Julian T. Müller, Glen J. Smales, Brian R. Pauw, Maged F. Bekheet, Aleksander Gurlo and Ulla Simon

Nano Select, 2023, 4, 615
DOI: 10.1002/nano.202300109

Tuning the Mechanical Properties of 3D‐printed Objects by the RAFT Process: From Chain‐Growth to Step‐Growth

Xiaofeng Pan, Jiajia Li, Zhuang Li, Qing Li, Xiangqiang Pan, Zhengbiao Zhang and Jian Zhu

Angew Chem Int Ed, 2024, 63
DOI: 10.1002/anie.202318564

Experimental and Computational Investigation of Lattice Sandwich Structures Constructed by Additive Manufacturing Technologies

Nikolaos Kladovasilakis, Paschalis Charalampous, Konstantinos Tsongas, Ioannis Kostavelis, Dimitrios Tzetzis and Dimitrios Tzovaras

JMMP, 2021, 5, 95
DOI: 10.3390/jmmp5030095

CO2 valorisation to methane on highly stable iron impregnated ceria-zirconia based 3D-printed catalyst

Saheli Biswas, Chandan Kundu, Wei Lin Ng, Shanthi Priya Samudrala, Tom Jarvis, Sarbjit Giddey and Sankar Bhattacharya

Journal of CO2 Utilization, 2023, 72, 102501
DOI: 10.1016/j.jcou.2023.102501

Chemical etching optimization of 3D printed α-Al2O3 monoliths to enhance the catalytic applications

C. Radogna, I. Serrano, G. Fargas, J. Llorca and J.J. Roa

Journal of the European Ceramic Society, 2024, 44, 7189
DOI: 10.1016/j.jeurceramsoc.2024.05.006

Calcined hydrotalcites of varying Mg/Al ratios supported Rh catalysts: highly active mesoporous and stable catalysts toward catalytic partial oxidation of methane

Tibra Mozammel, Deepa Dumbre, PR Selvakannan, Kishor Kumar Sadasivuni and Suresh K. Bhargava

emergent mater., 2021, 4, 469
DOI: 10.1007/s42247-020-00158-2

Widely accessible 3D printing technologies in chemistry, biochemistry and pharmaceutics: applications, materials and prospects

Evgeniy G. Gordeev and Valentine P. Ananikov

Russ. Chem. Rev., 2020, 89, 1507
DOI: 10.1070/RCR4980

Self-Cleaning Ag-TiO2 Heterojunction Grafted on a 3D-Printed Metal Substrate: Photocatalytic Degradation of Rhodamine B and Surface-Enhanced Raman Spectroscopic Monitoring of Kinetics

Uzma Malik, Maciej Mazur, Dharmendra D. Mandaliya, Ravindra D. Gudi, Selvakannan Periasamy and Suresh K. Bhargava

ACS Omega, 2025, 10, 13453
DOI: 10.1021/acsomega.4c11672

FINITE ELEMENT ANALYSIS AND TOPOLOGY OPTIMIZATION OF A HIGH-PERFORMANCE LOWER PROSTHETIC LIMB

Theologos Evangelos Bountourelis, Nikolaos Kladovasilakis, Konstantinos Tsongas, Panagiotis Kyratsis and Dimitrios Tzetzis

IJMMT, 2023, 15, 148
DOI: 10.54684/ijmmt.2023.15.1.148

Improved low-temperature CO oxidation using heterogeneous nanofibrous structures decorated with Pd atoms and nanocrystals

M.A. Rodriguez-Olguin, D. Cazac, F. Ruiz-Zepeda, S. Bartling, M. Bosco, H. Atia, R. Eckelt, A. Manzo-Robledo, M. Vandichel, A. Aguirre, J.G.E. Gardeniers and A. Susarrey-Arce

Materials Today Catalysis, 2025, 9, 100093
DOI: 10.1016/j.mtcata.2025.100093

Continuous Flow Hydrogenation of Flavorings and Fragrances Using 3D-Printed Catalytic Static Mixers

Milan Kundra, Tom Grall, Derrick Ng, Zongli Xie and Christian H. Hornung

Ind. Eng. Chem. Res., 2021, 60, 1989
DOI: 10.1021/acs.iecr.0c05671

Preliminary modelling as the first stage of targeted organic synthesis

Ilya Yu. Titov, Viktor S. Stroylov, PolinaV. Rusina and Igor V. Svitanko

Russ. Chem. Rev., 2021, 90, 831
DOI: 10.1070/RCR5012

Hybrid Mesoporous Silica/Noble-Metal Nanoparticle Materials—Synthesis and Catalytic Applications

Malcolm Davidson, Yazhou Ji, G. Jeremy Leong, Nolan C. Kovach, Brian G. Trewyn and Ryan M. Richards

ACS Appl. Nano Mater., 2018, 1, 4386
DOI: 10.1021/acsanm.8b00967

The Static and Fatigue Behavior of AlSiMg Alloy Plain, Notched, and Diamond Lattice Specimens Fabricated by Laser Powder Bed Fusion

Hugo Soul, Patrick Terriault and Vladimir Brailovski

JMMP, 2018, 2, 25
DOI: 10.3390/jmmp2020025

Advances in 3D printing of thermoplastic polymer composites and nanocomposites

Arnaldo D. Valino, John Ryan C. Dizon, Alejandro H. Espera, Qiyi Chen, Jamie Messman and Rigoberto C. Advincula

Progress in Polymer Science, 2019, 98, 101162
DOI: 10.1016/j.progpolymsci.2019.101162

Integrating Reactors and Catalysts through Three‐Dimensional Printing: Efficiency and Reusability of an Impregnated Palladium on Silica Monolith in Sonogashira and Suzuki Reactions

Antonio S. Díaz‐Marta, Susana Yañez, Eliana Lasorsa, Patricia Pacheco, Carmen R. Tubío, José Rivas, Yolanda Piñeiro, Manuel A. Gonzalez Gómez, Manuel Amorín, Francisco Guitián and Alberto Coelho

ChemCatChem, 2020, 12, 1762
DOI: 10.1002/cctc.201902143

Revealing interactions of layered polymeric materials at solid-liquid interface for building solvent compatibility charts for 3D printing applications

Kirill S. Erokhin, Evgeniy G. Gordeev and Valentine P. Ananikov

Sci Rep, 2019, 9
DOI: 10.1038/s41598-019-56350-w

Additive Manufacturing Technologies: 3D Printing in Organic Synthesis

Sergio Rossi, Alessandra Puglisi and Maurizio Benaglia

ChemCatChem, 2018, 10, 1512
DOI: 10.1002/cctc.201701619

Porous 3D Printed Scavenger Filters for Selective Recovery of Precious Metals from Electronic Waste

Elmeri Lahtinen, Mikko M. Hänninen, Kimmo Kinnunen, Heikki M. Tuononen, Ari Väisänen, Kari Rissanen and Matti Haukka

Advanced Sustainable Systems, 2018, 2
DOI: 10.1002/adsu.201800048

3D printed microstructured Au/TiO2 catalyst for hydrogen photoproduction

Ander Elkoro, Lluís Soler, Jordi Llorca and Ignasi Casanova

Applied Materials Today, 2019, 16, 265
DOI: 10.1016/j.apmt.2019.06.007

Multi-spectroscopic analysis of high temperature oxides formed on cobalt-chrome-molybdenum alloys

Elia Marin, Alex Lanzutti, Alfredo Rondinella, Francesco Sordetti, Michele Magnan, Taigi Honma, Yumi Yoshida, Wenliang Zhu, Giuseppe Pezzotti and Lorenzo Fedrizzi

Journal of Materials Research and Technology, 2022, 20, 3061
DOI: 10.1016/j.jmrt.2022.08.071

Synchrotron µ-CT-based morphological characterization of additively manufactured open porous structures

Robert Otto, Knut Sørby, Bernhard Hesse, Javier Gerber, Emely Bortel and Christoph Kiener

Additive Manufacturing, 2022, 55, 102874
DOI: 10.1016/j.addma.2022.102874

Advanced preparation method of monolithic catalyst carriers using 3D-printing technology

Filip Car, Gabriela Brnadić, Vesna Tomašić and Domagoj Vrsaljko

Prog Addit Manuf, 2022, 7, 797
DOI: 10.1007/s40964-022-00266-x

Customizing continuous chemistry and catalytic conversion for carbon–carbon cross-coupling with 3dP

Robert E. McMillin, Brian Clark, Kaitlin Kay, B. Frank Gupton and James K. Ferri

International Journal of Chemical Reactor Engineering, 2023, 21, 313
DOI: 10.1515/ijcre-2022-0117

Formation of oxides on CoCrMo surfaces at room temperature: An XPS study

Ivana Jelovica Badovinac, Ivna Kavre Piltaver, Robert Peter, Iva Saric and Mladen Petravic

Applied Surface Science, 2019, 471, 475
DOI: 10.1016/j.apsusc.2018.12.004

Additive manufacturing of ceramics from thermoplastic feedstocks

Ipeknaz Özden, Aljaž Iveković and Andraž Kocjan

Open Ceramics, 2021, 6, 100129
DOI: 10.1016/j.oceram.2021.100129

Intensification of catalytic reactors: A synergic effort of Multiscale Modeling, Machine Learning and Additive Manufacturing

Mauro Bracconi

Chemical Engineering and Processing - Process Intensification, 2022, 181, 109148
DOI: 10.1016/j.cep.2022.109148

The determination of the electrochemically active surface area and its effects on the electrocatalytic properties of structured nickel electrodes produced by additive manufacturing

Ricardo Martínez-Hincapié, Jan Wegner, Muhammad Usman Anwar, Ali Raza-Khan, Steffen Franzka, Stefan Kleszczynski and Viktor Čolić

Electrochimica Acta, 2024, 476, 143663
DOI: 10.1016/j.electacta.2023.143663

The Role of 3D Printing in the Development of a Catalytic System for the Heterogeneous Fenton Process

Lucia D’Accolti, Alessia De Cataldo, Francesco Montagna, Carola Esposito Corcione and Alfonso Maffezzoli

Polymers, 2023, 15, 580
DOI: 10.3390/polym15030580

Pollutants abatement in aqueous solutions with geopolymer catalysts: A photo fenton case

Marina Clausi, Stefano Savino, Federico Cangialosi, Giacomo Eramo, Antonio Fornaro, Luca Quatraro, Daniela Pinto and Lucia D'Accolti

Chemosphere, 2023, 344, 140333
DOI: 10.1016/j.chemosphere.2023.140333

3D Printing of Integrated Metallic Reactor Catalysts: Concept and Application

Frances Pope, Millie Fowler, Daan Giesen, Larissa Drangai and Gadi Rothenberg

Chem Eng & Technol, 2024, 47, 932
DOI: 10.1002/ceat.202400087

Fabrication of Porous Hydrogenation Catalysts by a Selective Laser Sintering 3D Printing Technique

Elmeri Lahtinen, Lotta Turunen, Mikko M. Hänninen, Kalle Kolari, Heikki M. Tuononen and Matti Haukka

ACS Omega, 2019, 4, 12012
DOI: 10.1021/acsomega.9b00711

A Scientist’s Guide to Buying a 3D Printer: How to Choose the Right Printer for Your Laboratory

Joshua J. Tully and Gabriel N. Meloni

Anal. Chem., 2020, 92, 14853
DOI: 10.1021/acs.analchem.0c03299

Comparison of Direct Ink Writing and Binder Jetting for Additive Manufacturing of Pt/Al2o3 Catalysts for the Dehydrogenation of Perhydro-Dibenzyltoluene

Hanh My Bui, Paula F. Großmann, Anne Berger, Alexander Seidel, Markus Tonigold, Normen Szesni, Richard Fischer, Bernhard Rieger and Kai-Olaf Hinrichsen

SSRN Journal, 2022
DOI: 10.2139/ssrn.4197757

In Search of an Effective Workability Zone during the 3D Printing of Polymeric Periodic Open Cellular Structures Potentially Useful as Microreactors

Pablo F. Lietor, David González-Lechuga, Francisco Antonio Corpas-Iglesias and Oscar Hernando Laguna Espitia

Catalysts, 2022, 12, 873
DOI: 10.3390/catal12080873

3D-printed photocatalytic scaffolds of BiVO4 by direct ink writing for acetaminophen mineralization

Manuel Alejandro Ávila-López, Francisco E. Longoria-Rodríguez, Tania E. Lara-Ceniceros, M.A. Garza-Navarro and José Bonilla-Cruz

Journal of the European Ceramic Society, 2024, 44, 6677
DOI: 10.1016/j.jeurceramsoc.2024.04.008

Recent Advances in the Development of Highly Conductive Structured Supports for the Intensification of Non-adiabatic Gas-Solid Catalytic Processes: The Methane Steam Reforming Case Study

Riccardo Balzarotti, Matteo Ambrosetti, Alessandra Beretta, Gianpiero Groppi and Enrico Tronconi

Front. Chem. Eng., 2022, 3
DOI: 10.3389/fceng.2021.811439

Influence of internal and external surface area on impregnation and activity of 3D printed catalyst carriers

Paula F. Großmann, Markus Tonigold, Normen Szesni, Richard W. Fischer, Alexander Seidel, Klaus Achterhold, Franz Pfeiffer and Bernhard Rieger

Catalysis Communications, 2023, 175, 106610
DOI: 10.1016/j.catcom.2023.106610

Flexible distillation test rig on a laboratory scale for characterization of additively manufactured packings

Johannes Neukäufer, Nadin Sarajlic, Harald Klein, Sebastian Rehfeldt, Heiko Hallmann, Carsten Knösche and Thomas Grützner

AIChE Journal, 2021, 67
DOI: 10.1002/aic.17381

Enabling intensification of multiphase chemical processes with additive manufacturing

Robert E. McMillin, Adam R. Luxon and James K. Ferri

Advances in Colloid and Interface Science, 2020, 285, 102294
DOI: 10.1016/j.cis.2020.102294

Iron-based metal-organic frameworks integrated into 3D printed ceramic architectures

Alma D. Salazar-Aguilar, Asunción Quintanilla, Sofía M. Vega-Díaz, José A. Casas, Pilar Miranzo, M. Isabel Osendi and Manuel Belmonte

Open Ceramics, 2021, 5, 100047
DOI: 10.1016/j.oceram.2020.100047

Development of a manufacturing process for Binder Jet 3D printed porous Al2O3 supports used in heterogeneous catalysis

Hanh My Bui, Richard Fischer, Normen Szesni, Markus Tonigold, Klaus Achterhold, Franz Pfeiffer and Olaf Hinrichsen

Additive Manufacturing, 2022, 50, 102498
DOI: 10.1016/j.addma.2021.102498

Print-Light-Synthesis of Ni and NiFe-Nanoscale Catalysts for Oxygen Evolution

Victor Costa Bassetto, Mounir Mensi, Emad Oveisi, Hubert H. Girault and Andreas Lesch

ACS Appl. Energy Mater., 2019, 2, 6322
DOI: 10.1021/acsaem.9b00957

Mechanical and FEA-Assisted Characterization of Fused Filament Fabricated Triply Periodic Minimal Surface Structures

Nikolaos Kladovasilakis, Konstantinos Tsongas and Dimitrios Tzetzis

J. Compos. Sci., 2021, 5, 58
DOI: 10.3390/jcs5020058

Recovery of 17β-Estradiol Using 3D Printed Polyamide-12 Scavengers

Janne Frimodig, Aino Autio, Elmeri Lahtinen and Matti Haukka

3D Printing and Additive Manufacturing, 2023, 10, 1122
DOI: 10.1089/3dp.2021.0063

A Review on New 3-D Printed Materials’ Geometries for Catalysis and Adsorption: Paradigms from Reforming Reactions and CO2 Capture

Ahmad Soliman, Nahla AlAmoodi, Georgios N. Karanikolos, Charalabos C. Doumanidis and Kyriaki Polychronopoulou

Nanomaterials, 2020, 10, 2198
DOI: 10.3390/nano10112198

Controlled mixing during colloidal quantum dot synthesis: A proxy-concept based on equivalent parameters

Ahmed M. Salaheldin and Doris Segets

Chemical Engineering Journal, 2023, 475, 145393
DOI: 10.1016/j.cej.2023.145393

3D printed Ni/Al2O3 based catalysts for CO2 methanation - a comparative and operando XRD-CT study

Vesna Middelkoop, Antonis Vamvakeros, Dieter de Wit, Simon D.M. Jacques, Simge Danaci, Clement Jacquot, Yoran de Vos, Dorota Matras, Stephen W.T. Price and Andrew M. Beale

Journal of CO2 Utilization, 2019, 33, 478
DOI: 10.1016/j.jcou.2019.07.013

Experimental Quantification of Gas Dispersion in 3D-Printed Logpile Structures Using a Noninvasive Infrared Transmission Technique

Leon R.S. Rosseau, Merlijn A.M.R. Schinkel, Ivo Roghair and Martin van Sint Annaland

ACS Eng. Au, 2022, 2, 236
DOI: 10.1021/acsengineeringau.1c00040

Combined dip/spin coating deposition of Ni/CeO2 and Ni/CeO2-Al2O3 onto 3D printed AlSi10Mg Periodic Open Cellular Structures (POCS)

Cristina Italiano, Gabriel Marino, Minju Thomas, Benjamin Hary, Steve Nardone, Simon Richard, Assia Saker, Damien Tasso, Nicolas Meynet, Pierre Olivier, Fausto Gallucci and Antonio Vita

Applied Surface Science Advances, 2025, 27, 100731
DOI: 10.1016/j.apsadv.2025.100731

Manufactura aditiva, nanopartículas y catálisis, el impacto de estos procesos en el desarrollo sostenible de la industria

Lucy Caterine Daza Gómez and Rocío Redón

Mat. Avan., 2024, 106
DOI: 10.22201/iim.rma.2024.41.105

Optimization of Post-processing Annealing Conditions of the Laser Powder Bed-Fused Ti–18Zr–14Nb Shape Memory Alloy: Structure and Functional Properties

A. Kreitcberg, V. Sheremetyev, M. Tsaturyants, S. Prokoshkin and V. Brailovski

Shap. Mem. Superelasticity, 2019, 5, 172
DOI: 10.1007/s40830-019-00218-5

2022 roadmap on 3D printing for energy

Albert Tarancón, Vincenzo Esposito, Marc Torrell, Marcel Di Vece, Jae Sung Son, Poul Norby, Sourav Bag, Patrick S Grant, A Vogelpoth, S Linnenbrink, M Brucki, T Schopphoven, A Gasser, Elif Persembe, Dionysia Koufou, Simon Kuhn, Rob Ameloot, Xu Hou, Kurt Engelbrecht, Christian R H Bahl, Nini Pryds, Jie Wang, Costas Tsouris, Eduardo Miramontes, Lonnie Love, Canhai Lai, Xin Sun, Martin Ryhl Kærn, Gennaro Criscuolo and David Bue Pedersen

J. Phys. Energy, 2022, 4, 011501
DOI: 10.1088/2515-7655/ac483d

Applying a Compact Porous Media Model to Numerically Derive Resistance Coefficients for Lattice Structures

Kyle Pittman, Jacob Riglin, Jay Chen, Cesar Dominguez, Marvin Davis and Rami Batrice

Computers & Fluids, 2025, 106798
DOI: 10.1016/j.compfluid.2025.106798

Mass transfer and RTD studies in 3D printed serpentine and wavy serpentine millireactor

Sravanthi Veluturla, Vijay Kumar V., Akshay G, Sindhu Pranavi and Swastik Singh

Chemical Engineering Communications, 2024, 211, 1828
DOI: 10.1080/00986445.2024.2389143

Design and catalytic performance of Ni catalyst for CO2 methanation based on DIW-3D printing

Ke Li, Yifan Zhang, Weixin Shen, Zhihao Liu, Qinxiang Ma, Jianli Zhang and Faliang Luo

Fuel, 2025, 380, 133129
DOI: 10.1016/j.fuel.2024.133129

Additively Manufactured Zirconia-Supported Indium Oxide Catalysts and Their Performance in Direct Methanol Synthesis

Emiliano S. Dal Molin, Mudassar Javed, Georg Brösigke, Maik Alexander Rudolph, Jens-Uwe Repke, Reinhard Schomäcker, Ulla Simon, Maged F. Bekheet and Aleksander Gurlo

Ind. Eng. Chem. Res., 2025, 64, 1032
DOI: 10.1021/acs.iecr.4c03439

Review on Additive Manufacturing of Catalysts and Sorbents and the Potential for Process Intensification

Leon R.S. Rosseau, Vesna Middelkoop, Hans A.M. Willemsen, Ivo Roghair and Martin van Sint Annaland

Front. Chem. Eng., 2022, 4
DOI: 10.3389/fceng.2022.834547

Rapid Prototyping for Photochemical Reaction Engineering

Fabian Guba, Ümit Tastan, Katrin Gugeler, Melanie Buntrock, Tobias Rommel and Dirk Ziegenbalg

Chemie Ingenieur Technik, 2019, 91, 17
DOI: 10.1002/cite.201800035

3D Printing in Heterogeneous Catalysis—The State of the Art

Elżbieta Bogdan and Piotr Michorczyk

Materials, 2020, 13, 4534
DOI: 10.3390/ma13204534

3D printing synthesis of catalysts

Xianhui Zhao, Canan Karakaya, Moriko Qian, Rongge Zou, Weijie Zhang, Zhou Lu, Debtanu Maiti, Avik Samanta, Weiming Wan, Xiangbei Liu, Anisia Tiplea, Yan Li, Shaoqing Cui, Chenxi Wang, Hanwu Lei, Sherith Bankston, Sefa Yilmaz, Jingguang G. Chen and Soydan Ozcan

Materials Today Sustainability, 2024, 26, 100746
DOI: 10.1016/j.mtsust.2024.100746