Issue 9, 2024

In chemico methodology for engineered nanomaterial categorization according to number, nature and oxidative potential of reactive surface sites

Abstract

Methanol probe chemisorption quantifies the number of reactive sites at the surface of engineered nanomaterials, enabling normalization per reactive site in reactivity and toxicity tests, rather than per mass or physical surface area. Subsequent temperature-programmed surface reaction (TPSR) of chemisorbed methanol identifies the reactive nature of surface sites (acidic, basic, redox or combination thereof) and their reactivity. Complementary to the methanol assay, a dithiothreitol (DTT) probe oxidation reaction is used to evaluate the oxidation capacity. These acellular approaches to quantify the number, nature, and reactivity of surface sites constitute a new approach methodology (NAM) for site-specific classification of nanomaterials. As a proof of concept, CuO, CeO2, ZnO, Fe3O4, CuFe2O4, Co3O4 and two TiO2 nanomaterials were probed. A harmonized reactive descriptor for ENMs was obtained: the DTT oxidation rate per reactive surface site, or oxidative turnover frequency (OxTOF). CuO and CuFe2O4 ENMs exhibit the largest reactive site surface density and possess the highest oxidizing ability in the series, as estimated by the DTT probe reaction, followed by CeO2 NM-211 and then titania nanomaterials (DT-51 and NM-101) and Fe3O4. DTT depletion for ZnO NM-110 was associated with dissolved zinc ions rather than the ZnO particles; however, the basic characteristics of the ZnO NM-110 particles were evidenced by methanol TPSR. These acellular assays allow ranking the eight nanomaterials into three categories with statistically different oxidative potentials: CuO, CuFe2O4 and Co3O4 are the most reactive; ceria exhibits a moderate reactivity; and iron oxide and the titanias possess a low oxidative potential.

Graphical abstract: In chemico methodology for engineered nanomaterial categorization according to number, nature and oxidative potential of reactive surface sites

Supplementary files

Article information

Article type
Paper
Submitted
10 nov 2023
Accepted
05 jul 2024
First published
09 jul 2024
This article is Open Access
Creative Commons BY license

Environ. Sci.: Nano, 2024,11, 3744-3760

In chemico methodology for engineered nanomaterial categorization according to number, nature and oxidative potential of reactive surface sites

V. Alcolea-Rodriguez, R. Portela, V. Calvino-Casilda and M. A. Bañares, Environ. Sci.: Nano, 2024, 11, 3744 DOI: 10.1039/D3EN00810J

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements