Issue 7, 2023

Wearable energy storage with MXene textile supercapacitors for real world use

Abstract

Successful implementation of wearable electronics requires practical wearable energy storage systems that can meet certain power and energy metrics. However, flexible, stretchable, and truly textile-grade energy storing platforms have so far remained missing from most e-textile systems due to the insufficient performance metrics of current available materials and technologies. Two-dimensional (2D) transition metal carbides and nitrides (MXenes) offer unique combinations of properties including metallic conductivity, high specific capacitance, hydrophilicity, and solution processability, as well as mechanical flexibility and robustness that render these materials promising for flexible wearable energy storage technologies. Here we demonstrate textile-based electrochemical capacitor devices with a high areal loading of Ti3C2Tx that can be integrated in series via a stacked design approach and meet the real-world power requirements for wearable electronics. A demo textile supercapacitor with 5 cells in series, a footprint area of 25 cm2 and an MXene loading of 24.2 mg cm−2 could operate in a 6 V voltage window delivering an energy density of 0.401 mW h cm−2 at a power density of 0.248 mW cm−2, and an areal capacitance of 146 mF cm−2 at a 0.16 mA cm−2 discharge current. The MXene textile supercapacitor powers a temperature monitoring system requiring high current densities with wireless data transmission to a receiver for 96 minutes. Power time is a crucial subject for integration of flexible supercapacitors with commercial microelectronics and successful commercialization of smart garments. This initial report of an MXene textile supercapacitor powering a practical peripheral electronics system demonstrates the potential of this family of 2D materials to support a wide range of devices such as motion trackers and biomedical monitors in a flexible textile form factor.

Graphical abstract: Wearable energy storage with MXene textile supercapacitors for real world use

Supplementary files

Article information

Article type
Paper
Submitted
17 nov 2022
Accepted
10 jan 2023
First published
10 jan 2023

J. Mater. Chem. A, 2023,11, 3514-3523

Wearable energy storage with MXene textile supercapacitors for real world use

A. Inman, T. Hryhorchuk, L. Bi, R. (. Wang, B. Greenspan, T. Tabb, E. M. Gallo, A. VahidMohammadi, G. Dion, A. Danielescu and Y. Gogotsi, J. Mater. Chem. A, 2023, 11, 3514 DOI: 10.1039/D2TA08995E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements