Issue 9, 2023

All-blade-coated flexible perovskite solar cells & modules processed in air from a sustainable dimethyl sulfoxide (DMSO)-based solvent system

Abstract

Flexible perovskite solar cells have been considered promising candidates for novel applications that require a high power-to-weight ratio. However, the scalable ambient air deposition of efficient devices remains a major challenge of this technology. In addition, toxic solvents are regularly used in perovskite layer deposition, which can damage the environment and endanger the safety of potential production lines. In this paper, we introduce sustainable flexible perovskite solar modules (flex-PSMs), in which all layers are deposited via blade coating in ambient air without the usage of toxic solvents. A double-cation Cs0.15FA0.85PbI3−xBrx-based perovskite is blade coated in two steps as the absorber and the coating parameters are optimized. We found that proper drying in the first step is crucial to obtain high-quality perovskite films with the right phase of the perovskite. We improved the morphology and limited the voids in the perovskite layer by additive engineering and obtained 14% efficiency. Finally, 94 cm2 modules were manufactured to demonstrate the scalability of the process.

Graphical abstract: All-blade-coated flexible perovskite solar cells & modules processed in air from a sustainable dimethyl sulfoxide (DMSO)-based solvent system

Supplementary files

Article information

Article type
Paper
Submitted
03 des 2022
Accepted
16 mar 2023
First published
17 mar 2023

Sustainable Energy Fuels, 2023,7, 2219-2228

All-blade-coated flexible perovskite solar cells & modules processed in air from a sustainable dimethyl sulfoxide (DMSO)-based solvent system

F. Jafarzadeh, L. A. Castriotta, F. De Rossi, J. Ali, F. Di Giacomo, A. Di Carlo, F. Matteocci and F. Brunetti, Sustainable Energy Fuels, 2023, 7, 2219 DOI: 10.1039/D2SE01678H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements