Issue 21, 2023

Post-annealing optimization of the heteroepitaxial La-doped SrSnO3 integrated on silicon via ALD

Abstract

Wide band gap (WBG) alkaline-earth stannate transparent oxide semiconductors (TOSs) have attracted increasing attention in recent years for their high carrier mobility and outstanding optoelectronic properties, and have been applied widely in various devices, such as flat-panel displays. Most alkaline-earth stannates are grown by molecular beam epitaxy (MBE); there are some intractable issues with the tin source including the volatility with SnO and Sn sources and the decomposition of the SnO2 source. In contrast, atomic layer deposition (ALD) serves as an ideal technique for the growth of complex stannate perovskites with precise stoichiometry control and tunable thickness at the atomic scale. Herein, we report the La-SrSnO3/BaTiO3 perovskite heterostructure heterogeneously integrated on Si (001), which uses ALD-grown La-doped SrSnO3 (LSSO) as a channel material and MBE-grown BaTiO3 (BTO) as a dielectric material. The reflective high-energy electron diffraction and X-ray diffraction results indicate the crystallinity of each epitaxial layer with a full width at half maximum (FWHM) of 0.62°. In situ X-ray photoelectron spectroscopy results confirm that there was no Sn0 state in ALD-deposited LSSO. Besides, we report a strategy for the post-treatment of LSSO/BTO perovskite heterostructures by controlling the oxygen annealing temperature and time, with a maximum oxide capacitance Cox of 0.31 μF cm−2 and a minimum low-frequency dispersion for the devices with 7 h oxygen annealing at 400 °C. The enhancement of capacitance properties is primarily attributed to a decrease of oxygen vacancies in the films and interface defects in the heterostructure interfaces during an additional ex situ excess oxygen annealing. This work expands current optimization methods for reducing defects in epitaxial LSSO/BTO perovskite heterostructures and shows that excess oxygen annealing is a powerful tool for enhancing the capacitance properties of LSSO/BTO heterostructures.

Graphical abstract: Post-annealing optimization of the heteroepitaxial La-doped SrSnO3 integrated on silicon via ALD

Supplementary files

Article information

Article type
Paper
Submitted
08 des 2022
Accepted
20 apr 2023
First published
09 mai 2023

Nanoscale, 2023,15, 9432-9439

Author version available

Post-annealing optimization of the heteroepitaxial La-doped SrSnO3 integrated on silicon via ALD

Y. Zhang, S. Hu, P. Chen, J. Zhu, B. Chen, R. Bai, H. Zhu, L. Chen, D. W. Zhang, J. C. Lee, Q. Sun, J. G. Ekerdt and L. Ji, Nanoscale, 2023, 15, 9432 DOI: 10.1039/D2NR06861C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements