Issue 42, 2020

3D-printing for electrolytic processes and electrochemical flow systems

Abstract

During the last few years, the use of additive manufacturing technologies, also known as 3D printing, has become increasingly popular in laboratories and research facilities. The reduced costs of printers and the large availability of different materials facilitate the adoption of this technology over established fabrication processes generally more costly and time-consuming. The use of 3D printing for the fabrication of electrochemical components is only at a very initial phase but has shown promising results in terms of research and developments of innovative and better performing devices for both energy and synthetic applications. However, a complete understanding of the benefits and limitations of the available 3D printing methods as well as a careful evaluation of the material properties is necessary to fully exploit this technology. A short description of the most commonly adopted 3D printing methods and principles is provided here as a useful foundation prior to the description of their most recent uses for electrochemical flow systems towards energy-related applications, electrosynthesis, water splitting and spectroelectrochemistry. A final discussion of possible future directions will be also given.

Graphical abstract: 3D-printing for electrolytic processes and electrochemical flow systems

Article information

Article type
Review Article
Submitted
13 aug 2020
Accepted
12 okt 2020
First published
20 okt 2020

J. Mater. Chem. A, 2020,8, 21902-21929

3D-printing for electrolytic processes and electrochemical flow systems

A. Ambrosi, R. R. S. Shi and R. D. Webster, J. Mater. Chem. A, 2020, 8, 21902 DOI: 10.1039/D0TA07939A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements