Issue 7, 2020

Roll-to-roll slot-die coated P–I–N perovskite solar cells using acetonitrile based single step perovskite solvent system

Abstract

Roll-to-roll coating of all active layers is demonstrated for a P–I–N perovskite solar cell stack, using a single step perovskite ink with an acetonitrile solvent system and flexible plastic substrate. A slot-die coating roll-to-roll process (with a common coating speed for all layers) is developed by using appropriate length meniscus guides as part of the coating head for each ink rheology. High performance devices are demonstrated with four roll-to-roll slot-die coated layers and evaporated top electrode. The drying conditions of the perovskite layer are optimized and found to be critical to achieving good performance. Multi solvent blend systems for the electron collection layer are developed that are more industrially compatible than the commonly used chlorobenzene solvent system and make use of a gradient of solvent volatilities to give both good macro film formation and rapid drying. A stabilised power conversion efficiency of 12.2% is demonstrated, that is the highest reported to date for devices with all layers other than the top electrode deposited roll-to-roll. This work demonstrates the feasibility of a roll-to-roll fabrication process for perovskite solar cells that could be transferred to a fully inline roll-to-roll process with all coating and drying stages made sequentially on one line running at a common coating speed and further demonstrates the potential to produce high efficiency photovoltaics using roll-to-roll fabrication methods.

Graphical abstract: Roll-to-roll slot-die coated P–I–N perovskite solar cells using acetonitrile based single step perovskite solvent system

Supplementary files

Article information

Article type
Paper
Submitted
20 mar 2020
Accepted
03 mai 2020
First published
04 mai 2020

Sustainable Energy Fuels, 2020,4, 3340-3351

Roll-to-roll slot-die coated P–I–N perovskite solar cells using acetonitrile based single step perovskite solvent system

D. Burkitt, R. Patidar, P. Greenwood, K. Hooper, J. McGettrick, S. Dimitrov, M. Colombo, V. Stoichkov, D. Richards, D. Beynon, M. Davies and T. Watson, Sustainable Energy Fuels, 2020, 4, 3340 DOI: 10.1039/D0SE00460J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements