Issue 15, 2019

Interfacial engineering for highly efficient quasi-two dimensional organic–inorganic hybrid perovskite light-emitting diodes

Abstract

Metal halide-based perovskites are regarded as promising candidates for light-emitting diodes (LEDs) owing to their high color purity, tunable bandgap and solution processability. However, poor active-layer morphology and non-radiative charge recombination are still the main obstacles for practical use in displays and lighting. Here, we report a facile method to achieve high-performance green emitting perovskite light-emitting diodes (PeLEDs) by inserting an interface buffer layer (BL) based on an amphipathic conjugated molecule, betaine. We show evidence that the betaine layer controls the grain size of the perovskite and hence increases the crystalline nucleation sites, which ultimately leads to a high photoluminescence quantum yield (PLQY) and a device with an external quantum efficiency (EQE) of 11.1%. In addition, the current leakage is significantly reduced due to the high quality crystallization of the thin film. These results indicate that the interface BL is an effective strategy to boost the efficiency of PeLEDs.

Graphical abstract: Interfacial engineering for highly efficient quasi-two dimensional organic–inorganic hybrid perovskite light-emitting diodes

Supplementary files

Article information

Article type
Paper
Submitted
23 des 2018
Accepted
19 feb 2019
First published
21 feb 2019

J. Mater. Chem. C, 2019,7, 4344-4349

Interfacial engineering for highly efficient quasi-two dimensional organic–inorganic hybrid perovskite light-emitting diodes

Q. Liu, S. Yuan, S. Sun, W. Luo, Y. Zhang, L. Liao and M. Fung, J. Mater. Chem. C, 2019, 7, 4344 DOI: 10.1039/C8TC06490C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements