Issue 22, 2017

Tuneable 3D printed bioreactors for transaminations under continuous-flow

Abstract

A method to efficiently immobilize enzymes on 3D printed continuous-flow devices is presented. Application of these chemically modified devices enables rapid screening of immobilization mechanisms and reaction conditions, simple transfer of optimised conditions into tailored printed microfluidic reactors and development of continuous-flow biocatalytic processes. The bioreactors showed good activity (8–20.5 μmol h−1 mgenz−1) in the kinetic resolution of 1-methylbenzylamine, and very good stability (ca. 100 h under flow).

Graphical abstract: Tuneable 3D printed bioreactors for transaminations under continuous-flow

Supplementary files

Article information

Article type
Communication
Submitted
09 aug 2017
Accepted
03 okt 2017
First published
03 okt 2017

Green Chem., 2017,19, 5345-5349

Tuneable 3D printed bioreactors for transaminations under continuous-flow

E. Peris, O. Okafor, E. Kulcinskaja, R. Goodridge, S. V. Luis, E. Garcia-Verdugo, E. O'Reilly and V. Sans, Green Chem., 2017, 19, 5345 DOI: 10.1039/C7GC02421E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements