Issue 3, 2016

Volume-invariant ionic liquid microbands as highly durable wearable biomedical sensors

Abstract

Most current wearable electronic products are often based on rigid circuit board technologies, limiting their ‘true wearability’ on the soft human body due to the mechanical mismatch between electronic and biological materials. ‘True wearability’, which means intimate contact with the soft human body, can only really be achieved by stretchable electronics that can mimic the mechanical features of the human skin. The use of nanomaterials or wavy metal/semiconductor materials represents a promising strategy to achieve stretchable electronic devices, but such devices often experience local material delamination or cracking. In this work, we describe an ionic liquid (IL)-based approach for the fabrication of rubber band-like, stretchable strain sensors, which can circumvent these limitations. Non-volatile and flow properties allow us simply to ‘fill and seal’ microchannels fabricated by 3D printing to obtain lightweight, waterproof and thermally sensitive wearable sensors. Despite the simplicity of their fabrication, the sensors show excellent performance, including tunable sensitivity, detection of a wide range of strains (0.1–500%), high durability (little change in signal-to-noise ratios after 6 month storage under ambient conditions), an excellent long-term stability of 50 000 life cycles under both low (5%) and high (100%) strains. We further show that our IL-based sensor can accurately identify wrist pulses, and can be woven with commercial rubber bands into colourful bracelets for hand gesture detection, and seamlessly interface with wireless circuitry to allow the detection of cervical movements.

Graphical abstract: Volume-invariant ionic liquid microbands as highly durable wearable biomedical sensors

Supplementary files

Article information

Article type
Communication
Submitted
30 nov 2015
Accepted
12 jan 2016
First published
12 jan 2016

Mater. Horiz., 2016,3, 208-213

Volume-invariant ionic liquid microbands as highly durable wearable biomedical sensors

Y. Wang, S. Gong, S. J. Wang, G. P. Simon and W. Cheng, Mater. Horiz., 2016, 3, 208 DOI: 10.1039/C5MH00284B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements