Issue 16, 2023

What defines the perovskite solar cell efficiency and stability: fullerene-based ETL structure or film morphology?

Abstract

In this contribution, we report the synthesis and structural characterization of a series of fullerene derivatives and their further systematic investigation as promising ETL (electron transport layer) materials in p–i–n perovskite solar cells (PSCs). The devices fabricated using a set of fullerene derivatives F1–F6 demonstrated high power conversion efficiencies (PCEs), up to 19.0%, compared to the 17.3% obtained with reference cells assembled using the benchmark ETL material, [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM). The improved photovoltaic performance of PSCs incorporating the fullerene derivatives originated from a decreased trap density at the perovskite/ETL interface and full coverage of the perovskite absorber layer, which was revealed by the photoluminescence (PL) spectra and infrared scattering scanning near field optical microscopy (IR s-SNOM). Also, we enhanced our experimental results with theoretical DFT and DFT-MD calculations which gave further insight on the dependence between the structure and electron mobility in these films. Significantly improved operational stability was achieved for non-encapsulated devices using fluorine-loaded fullerene derivative F5 as the ETL, which retained >60% of the initial efficiency after ∼1300 h of continuous illumination (1 sun), whereas the reference cells with PC61BM as the ETL degraded to ∼40% within 200 h under the same aging conditions. Therefore, the obtained results demonstrated that the molecular structure of the fullerene derivatives affects the performance of PSCs, whereas the film morphology plays a crucial role in defining the operational stability of the devices.

Graphical abstract: What defines the perovskite solar cell efficiency and stability: fullerene-based ETL structure or film morphology?

Supplementary files

Article information

Article type
Paper
Submitted
02 apr 2023
Accepted
15 jun 2023
First published
15 jun 2023

Sustainable Energy Fuels, 2023,7, 3893-3901

What defines the perovskite solar cell efficiency and stability: fullerene-based ETL structure or film morphology?

M. M. Elnaggar, A. V. Mumyatov, N. A. Emelianov, L. G. Gutsev, V. V. Ozerova, I. V. Fedyanin, Y. V. Nelyubina, S. I. Troyanov, B. R. Ramachandran and P. A. Troshin, Sustainable Energy Fuels, 2023, 7, 3893 DOI: 10.1039/D3SE00432E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements