Issue 40, 2022

Inkjet-printed transparent micro-supercapacitors with morphology tailored co-continuous mesoporous Mn3O4

Abstract

High energy density, flexible supercapacitors typically use various carbon allotropes and 2-dimensional metals as the electrode material. As an alternative, here we report, fully printed, bendable and high-capacity micro-supercapacitors (MSCs) from large surface-to-volume ratio co-continuous mesoporous manganese oxide (Mn3O4). The printed 3-electrode supercapacitors have shown gravimetric capacitance as high as 1201 F g−1, whereas the printed and highly transparent micro-supercapacitors demonstrate a large potential window up to 2.6 V, and gravimetric and volumetric capacitances of 396 F g−1 and 1406 F cm−3 with printed aqueous solid polymer electrolytes and 679 F g−1 and 2411 F cm−3 with non-aqueous solid polymer electrolytes, respectively. The cyclic stability of these printed MSCs has been demonstrated up to 10 000 cycles with <2% reduction in initial capacitance. Flexible MSCs realized onto polyimide substrates also exhibit excellent gravimetric (653 F g−1) and volumetric (2317 F cm−3) capacitance, and no measurable performance degradation with bending fatigue tests performed down to the bending radius of 2.5 mm. In addition, the printed MSCs are found to be highly transparent with >90% transparency at 550 nm. The observed high energy density (353 W h kg−1), coupled with high transparency and adequate flexibility can make them ideally suitable for application in smart glasses and invisible electronics.

Graphical abstract: Inkjet-printed transparent micro-supercapacitors with morphology tailored co-continuous mesoporous Mn3O4

Supplementary files

Article information

Article type
Paper
Submitted
20 jun 2022
Accepted
13 sep 2022
First published
13 sep 2022

J. Mater. Chem. A, 2022,10, 21551-21564

Inkjet-printed transparent micro-supercapacitors with morphology tailored co-continuous mesoporous Mn3O4

S. S. Priyadarsini, S. Saxena, J. R. Pradhan and S. Dasgupta, J. Mater. Chem. A, 2022, 10, 21551 DOI: 10.1039/D2TA04901E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements