Open Access Article
This Open Access Article is licensed under a Creative Commons Attribution-Non Commercial 3.0 Unported Licence

Current challenges and future applications of antibacterial nanomaterials and chitosan hydrogel in burn wound healing

Que Bai , Caiyun Zheng , Wenting Chen , Na Sun , Qian Gao , Jinxi Liu , Fangfang Hu , SaHu Pimpi , Xintao Yan , Yanni Zhang * and Tingli Lu *
Key Laboratory of Space Bioscience and Biotechnology, School of Life Sciences, Northwestern Polytechnical University, Xi’an 710072, China. E-mail: yann.zhang@nwpu.edu.cn; lutinglixinxin@nwpu.edu.cn; Tel: +86 029-88460332

Received 16th June 2022 , Accepted 24th July 2022

First published on 27th July 2022


Abstract

Burns are one of the most devastating skin injuries, with severe burns affecting almost every organ system, and that causes a high mortality rate. The presence of microbial infection in burn wounds makes the healing process more complex, leading to delayed wound healing. Therefore, the primary problem in treating burns is to developing antimicrobial biomaterials to overcome bacterial infection. The present review covers burn classification, the burn wound healing process, and various local treatment methods to fight infection and promote healing. We discussed the recent progress in the treatment of burn wound infection. We provided information on the application of antimicrobial materials in burn treatment in recent years, especially nanoparticles and chitosan hydrogels. We also discuss the promising future therapies for burns and the prospects and limitations for eventual translation to the clinic.


image file: d2ma00695b-p1.tif

Que Bai

Que Bai received her BS degree from the Sichuan Agricultural University (China) in 2019. Since 2020, she has been studying for her PhD in Northwestern Polytechnical University. Her research focuses on the application of multifunctional hydrogels in wound repair.

image file: d2ma00695b-p2.tif

Caiyun Zheng

Caiyun Zheng was born in Henan Province, China. She holds a master's degree in biology from Jiangsu University of Science and Technology. During her master's degree, she studied algae genetic engineering at the Institute of Oceanology, Chinese Academy of Sciences. She is currently a PhD candidate in Biomedical Engineering at Northwestern Polytechnical University. Her main research interests are porous nanomaterials, hemostatic materials, molecular biology and biochemistry.

image file: d2ma00695b-p3.tif

Tingli Lu

Tingli Lu is a professor at Northwestern Polytechnical University (China). She received her PhD (2007) in Materialogy from Northwestern Polytechnical University, China. Since 2013, she has been working at the School of Life sciences, Northwestern Polytechnical University. Her research focuses on biological 3D printing, self-healing hydrogels, and medicinal carrier materials.


1. Introduction

Burns are the fourth most common type of trauma worldwide, coming after traffic injuries, falls, and interpersonal violence.1,2 According to the latest report from the World Health Organization, an estimated 265[thin space (1/6-em)]000 people die every year due to burn injuries.3 Burns can be caused by friction, heat, radiation, chemistry, or electric sources, but most burn injuries are caused by heat from hot liquids, solids or fire. Although all burn injuries involve tissue damage due to energy transfer, different causes may lead to different physiological and pathophysiological damage.4,5 For example, a flame can immediately cause a deep burn, whereas hot liquids or steam tend to appear more superficial initially due to rapid dilution of the source and energy.4 Alkaline chemicals cause acute necrosis (tissue is transformed into a liquid, viscous mass), while acidic burn causes coagulative necrosis (the architecture of the dead tissue can be preserved).4,6 Electrical injuries related to the strength of the electric field (the amperes and resistance of the tissue) tend to cause more deep tissue damage than that of visible skin damage.4,7

In addition to determining the cause of burn injuries, they must be classified according to their severity (depth and size) (Fig. 1). Currently, there are four types of burns: first-degree (superficial thickness), second-degree (partial or intermediate thickness), third-degree (full thickness) and fourth-degree.4 First-degree (superficial thickness, affecting the epidermis only) burns are typically benign. The burn site turns red and painful, while it can heal without scarring and do not require surgery. Second-degree (partial or intermediate thickness) burns cause painful blisters. The skin becomes red, moist, painful, and turns white when pressed. Third-degree (full thickness) burns are usually white, leathery or charred, dry, senseless (since nerves are destroyed) and require surgery. Fourth-degree burns cause damage to deeper tissues, such as muscle or bone. Usually, the wound is black and painless and frequently loses the burned part, requiring surgery (such as skin grafts).4,8 Furthermore, the burn wound can be divided into three zones according to the severity of tissue destruction and alterations in blood flow: the zone of coagulation, the zone of stasis/ischemia, and the zone of hyperaemia (Fig. 2). The coagulation zone is exposed to the greatest heat and suffers the most damage. Proteins denature above 41 °C, so excessive heat at the damaged site results in extensive protein denaturation, degradation, and coagulation, leading to tissue necrosis.9 The stasis/ischemia zone is characterized by reduced perfusion and potentially salvageable tissue. In this zone, hypoxia and ischemia can lead to tissue necrosis within 48 hours after injury in the absence of intervention.10 The outermost area of a burn wound is a hyperemia zone, which increases blood flow through inflammatory vasodilation and may recover unless infected or otherwise injured.5,9


image file: d2ma00695b-f1.tif
Fig. 1 Burn depth. First-degree (superficial thickness, affecting the epidermis only) burns are typically benign, the skin turns red, very painful, heal without scarring and do not require surgery. Second degree (partial or intermediate thickness) burn causes painful blisters. The skin is red, moist, painful, and turns white when pressed. Third-degree (full thickness) burns are usually white, leathery or charred, dry, painless and require surgery. Fourth-degree burns cause damage to deeper tissues, such as muscle or bone. Usually the wound is black and painless, and frequently leads to loss of the burned part, requiring surgery (such as skin grafts).

image file: d2ma00695b-f2.tif
Fig. 2 Zones of burn injury. The coagulation zone is exposed to the greatest heat and suffers the most damage. The stasis/ischemia zone is characterized by reduced perfusion and potentially salvageable tissue. Hyperemia zone that increases blood flow through inflammatory vasodilation and may recover unless infected or otherwise injured.

The healing of burn damage is a highly coordinated biological process including four overlapping phases: haemostasis phase, inflammatory phase, proliferation phase and remodeling phase.11

1.1. Haemostasis

After a burn injury occurs, the body autonomically responds to minimize the damage.12 In this phase, haemostasis occurs immediately after the injury. It involves vasoconstriction, platelet activation and aggregation, immune activation, blood clotting, complement system activation, and release of clotting and growth factors (such as platelet-derived growth factor, PDGF; epidermal growth factor, EGF; and transforming growth factor-β, TGF-β) by platelets, keratinocytes, macrophages and fibroblasts. This causes the fibrin clot to deposit at the injury site as a temporary matrix for the subsequent healing phase.3,4,12

1.2. Inflammation

Inflammation begins within 24 hours of the burn wound. Monocytes (and macrophages) and neutrophils are recruited to the site of injury due to localized vasodilation. Three days after the initiation of injury, monocytes transform into macrophages. Neutrophils produce tumor necrosis factor (TNF-α), interleukin-1 (IL-1) and interleukin-1 (IL-6), which activate inflammatory responses and stimulate the secretion of vascular endothelial growth factor (VEGF) and interleukin-8 (IL-8) to repair blood vessels.3,4,13 Macrophages produce TGF-α and TGF-β, fibroblast growth factor (FGF), PDGF, and VEGF to stimulate cell expansion and migration, as well as removing debris and pathogens from the site of injury.14

1.3. Proliferation

Proliferation phase consists of three steps: re-epithelialization, angiogenesis, and formation of granulation tissue. Re-epithelialization is induced by the activation of cytokines and growth factors, including insulin-like growth factor (IGF-1), nerve growth factor (NGF), EGF, and keratinocyte growth factor (KGF), which cause proliferation of keratinocytes, epithelial cells, stem cells, and fibroblasts. Keratinocytes contribute to epithelialization (wound surface closure) and angiogenesis (restoration of blood flow), and some fibroblasts differentiate into myofibroblasts, fibroblasts and myofibroblasts then produce extracellular matrix (ECM).12,15 The formation of new blood vessels (angiogenesis) involves several growth factors, such as VEGF, PDGF, FGF-β, granulocyte-macrophage colony stimulating factor (GM-CSF) and thrombin (which are the most important activators of endothelial cell growth).12,16 Fibroblasts are the major cell type involved in the granulation stage, which produce collagen and other ECM molecules.17 The ECM provides an appropriate scaffold for cell adhesion and organizes the growth and differentiation of cells. At the end of this stage, fibroblasts differentiate into myofibroblasts (forming a scar) or undergo apoptosis.18

1.4. Remodeling

During the remodeling stage, granulation tissue matures, scar tissue produces more collagen and elastin, and fibroblasts mature into myofibroblasts. The ECM is remodeled under the influence of growth factors, matrix metalloproteinases (MMPs), and tissue inhibitors of metalloproteinases (TIMPs), which results in increased tensile strength.14,19

Burn victims are at a high risk of infection, particularly drug-resistant infections, which often results in significantly longer hospital stays, delayed wound healing, higher costs and higher mortality.20–22 Therefore, the prevention and control of infection is the primary problem in the treatment of burn patients. Some routine treatments are based on the application of topical antimicrobial substances, such as topical antibiotics, povidone-iodine, silver sulfadiazine, chlorhexidine, mafenide acetate, etc.23,24 However, the conventional treatment also faces other problems, such as solubility, overdose, and cytotoxicity. Therefore, developing an efficient and safe drug delivery system, which can reduce the risk of drug-bacterial resistance and regulate the toxicity of antimicrobial agents, is very necessary for burn infection.25,26 In recent years, antibacterial nanomaterials and hydrogels have been favored by researchers. As an advanced delivery carrier, nanomaterials can be used as cell therapies, growth factors transport, gene therapy vectors, advanced antibacterial agents and biomaterials to promote wound healing.27 Hydrogels are 3D porous materials that consist of physical or chemical crosslinked polymer chains.28,29 Hydrogels can be developed for antibacterial applications due to their unique properties (such as hydrophilicity and porosity). In addition, some types of hydrogels have inherently antibacterial properties. In this review, we discuss the applications, challenges, advances, and new strategies of antimicrobial materials in burn treatment, and an emphasis on burn wounds, antimicrobial nanomaterials and hydrogels (Scheme 1).


image file: d2ma00695b-s1.tif
Scheme 1 Application of antimicrobial agents and antimicrobial hydrogels in wound dressings. Nanoparticles (including metals and metallic oxides) and antimicrobial agents (including antibiotics, antimicrobial peptides, antimicrobial drugs and biopolymers) in wound dressings; and hydrogels (including inherently antibacterial active hydrogels, conductive polymeric antibacterial hydrogels, in situ injectable hydrogels, and antibacterial phototherapy hydrogel) for burns, bone implant infections, and diabetic foot.

2. Application of antimicrobial agents in burns

2.1. Metal/metal oxides

In burn, commonly used metal/metal oxides include silver, gold, zinc oxide and titanium dioxide, etc. metal/metal oxides demonstrate a wide diversity of tunable properties that not only enhance their antibacterial properties, but also maintain their antibacterial activity over a long time, thus reducing the possibility of bacterial resistance.26,30Fig. 3 illustrates the possible antimicrobial mechanisms of metal/metal oxides.31
image file: d2ma00695b-f3.tif
Fig. 3 Antibacterial mechanisms of metal and metallic oxide nanoparticles. (A) Antibacterial mechanism of metal nanoparticles (Ag+) and metallic oxide nanoparticles (TiO2, ZnO). (B) The antibacterial mechanism of ZnO. (1) Disruption the plasma membrane permeability to make some substances flow out; (2) inhibition of DNA replication; (3) protein denaturation.
2.1.1. Metal.
Silver. Since ancient times, silver has been used in various forms, such as metallic silver, silver nitrate, silver sulfadiazine for treating infections in burns.32,33 Silver has a wide antimicrobial spectrum and is effective against various aerobic, anaerobic, Gram-positive, Gram-negative, fungus and viruses.34,35 The mechanism of silver ion (Ag+) may involve binding to the bacterial cell membrane through the interaction between Ag+ and the thiol group in proteins on the cell membrane, thus affecting the viability of bacterial cells by inhibiting DNA replication (Fig. 3(A)).31

Dressings containing silver nanoparticles have been widely used to reduce the risk of wound infection and kill bacteria in infected wounds, thus accelerating the wound healing process.36–38 But silver nanoparticles cannot be directly used for biomedical applications because of their cytotoxic effects on living systems.39 Therefore, silver nanoparticles should be incorporated into a polymer matrix to slow their release, reduce toxicity, and avoid penetration into other biological systems.40 Batool et al. synthesized green silver nanoparticles through plant extracts, and this silver nanoparticle was introduced into a polymer blend (starch and polyvinyl alcohol) to form nanocomposite films. The film shows excellent physical and antibacterial properties and has great potential for application in wound dressings.40 In another study, Chen et al. used a physical method to fabricate ultrasmall silver particles (nanoscale) and added silver particles into the carbomer gel (L-AgAPs-gel). L-AgAPs-gel (compared with commercial silver nanoparticles gels) demonstrated the broad-spectrum antibacterial activity and prevented bacterial colonization. It was distributed locally in the skin without inducing systemic toxicities and without obvious toxicity to wound healing related cells. It can also reduce inflammation, and accelerate diabetic and burn wound healing. In conclusion, L-AgAPs-gel is an effective and safe antimicrobial and anti-inflammatory material for wound treatment, which has excellent application prospects in the future.38 Yadollahi et al. prepared carboxymethyl cellulose nanocomposite hydrogel and combined it with silver nanoparticles to prepare antibacterial hydrogel. The antibacterial activity of the hydrogel was stable for more than one month, and it had an outstanding antibacterial effect against E. coli and S. aureus.41 Later, Kim et al. introduced silver oxide nanoparticles into the injectable methylcellulose hydrogel, and during the process of gelation, silver oxide nanoparticles were synthesized in situ and evenly distributed in the gel network. The hydrogel showed excellent antibacterial activity and a significant repair effect on burn.42

Besides using silver nanoparticles as antibacterial matrices alone, it can also be combined with other substances to promote wound healing, such as graphene, polydopamine and catechin.35,43–45 For example, compared with Ag NPs alone hydrogels, the Ag/graphene composite hydrogels have excellent biocompatibility, high swelling rate and good extensibility. At the same time, the hydrogels also have significant antibacterial activity and can accelerate the healing rate of rat wounds.35 Furthermore, Zhou and co-workers developed a novel Ag-based bactericide (ultrafine silver/silver chloride anchored on reduced graphene oxide, Ag/AgCl/rGO). This stable Ag/AgCl nano photocatalyst can ignore the release of Ag+, produce a high amount of oxidative radicals and kill the bacteria, and thus accelerate the epidermis regeneration and wound healing of burn wounds.43 To improve the biocompatibility of AgNps in vivo, Jiji et al. used a facile, simple catecholic redox method to anchor silver nanoparticles in bacterial cellulose (BC-PDAg), thus improving the security of silver nanoparticles. BC-PDAg nanocomposites exhibited antibacterial effects for both Gram-positive and Gram-negative bacteria. They also significantly promoted fibroblasts proliferation, granulation tissue formation, angiogenesis and re-epithelialization. Overall, BC-PDAg nanocomposites are beneficial to burn wound repair.44 Kalirajan et al. developed bioengineered collagen scaffolds incorporated with silver–catechin nanocomposites. The scaffold has good enzymatic and thermal stability, angiogenic and antibacterial properties, and adequately promotes scarless healing in severely infected burn wounds.45

Although AgNPs have excellent antibacterial effects, the development of NPs has been largely limited due to their physical and chemical instability.26 Moreover, Ag ions are efficient bactericides at a concentration of as low as ≈0.001–0.05 ppm. Still we should further discuss their tissue toxicity and cytotoxicity. Furthermore, the negative impacts of AgNPs on genes need to be considered.26 Therefore, toxicity should be minimized when designing AgNPs-based dressings. At the same time, green and environment-friendly AgNPs dressings should be developed, as well as stabilize and prolong the antibacterial effect of AgNPs to prevent infection and inflammation. The ability of bacteria to develop resistance to antibiotics, which limits the effectiveness of antibiotics in the treatment of infectious diseases.46 So far, there have been no conclusive reports on the development of bacterial resistance to Ag NPs. However, whether silver nanoparticles can be used in medicine to enhance the effectiveness of antibiotics or completely replace them to treat local and systemic infections remains to be studied.47


Gold. Gold NPs (AuNPs) are widely used in tissue repair due to their easy synthesis, nontoxicity, adjustable size and shape, flexible surface modification, and tunable optical and electronic properties.48–50 For example, Wei et al. prepared dual-functional AuNPs to treat multidrug-resistant (MDR) bacterial wounds infected by MRSA in diabetic (db/db) mice.51 The antibacterial activity of AuNPs was mainly as follows: the adhesion of AuNPs to the bacterial membrane, the subsequent change of membrane potential and the decrease of ATP level, and the inhibition of tRNA binding to ribosomes.52

Yang and co-workers reported that a small molecule (6-aminopenicillanic acid, APA) coated AuNPs, AuNPs were doped into an electrospun fiber of poly(ε-caprolactone) (PCL)/gelatin to produce a material that prevents wound infection by MDR bacteria. Yang used small molecules that serve as the main structural components of β-lactam antibiotics, such as 6-aminopenicillanic acid (6-APA), 7-aminocephalosporanic acid (7-ACA), and 7-aminodesacetoxycephalosporanic acid (7-ADCA) to modify the surfaces of AuNPs. The antimicrobial activity of Au_APA was better than that of Au_ACA and Au_ADCA. The antimicrobial mechanism of Au_APA was that it could induce cell membrane rupture and bacterial cell lysis. In addition, Au_APA NPs were non-toxic to cells at the concentration of 20 μg mL−1 (8 times minimal inhibitory concentration) and showed excellent biocompatibility.53 Recently, Qiao et al. proposed a composite structure of a cupriferous hollow nanoshell (AuAgCu2O NS), consisting of a hollow AuAg core and a Cu2O shell. On the one hand, the synergistic effect of controlled photothermal therapy and the release of silver ions from the hollow AuAg core can eradicate multi-drug-resistant bacteria, including extended-spectrum β-lactamase Escherichia coli (ESBL E. coli) and MRSA. On the other hand, copper ions released by Cu2O shells can promote endothelial cell angiogenesis and fibroblast cell migration, thus enhancing wound healing.54

Au NPs appear safer for mammalian cells than other metal NPs because their antimicrobial activity is independent of reactive oxygen species (ROS). In addition, the high functionalization capabilities of these Au NPs makes them ideal nanomaterials for targeted antimicrobial applications.

2.1.2. Metallic oxide. Photocatalysis is the primary antibacterial mechanism of metallic oxide NPs: under the ultraviolet irradiation of sunlight, a large number of free radicals (such as hydroxyl radicals and oxygen radicals) are generated on the surface of metallic oxide NPs. When the free radicals are exposed to microorganisms, the organic matter of microorganisms are oxidized into carbon dioxide, so metallic oxide NPs can kill microorganisms in a relatively short time.26,55
ZnO. Zn2+ is widely used as an antimicrobial agent due to its low toxicity and high biosafety.56,57 However, the disadvantages of discoloration, narrow antibacterial spectrum, poor long-term durability, poor heat resistance and stability have hindered their further development.56 In contrast, nanomaterials such as zinc oxide (ZnO) nanoparticles can overcome these problems to a certain extent.56,58,59 ZnO is widely used in solar energy conversion, antibacterial agents and photocatalysis degradation of environmental pollutants.60–63 Moreover, ZnO has unique properties that improve epithelial formation, enhance local defense systems, and reduce bacterial infection (kill bactericidal by the generating of ROS) and inflammation, thereby accelerating wound repair.64 The damage mechanism of ROS to bacteria can be mainly concluded into two pathways: (1) destroying the plasma membrane permeability to make some substances flow out, or affecting the metabolic activities of the bacteria; (2) breaking and disaggregating DNA strands, generating stable oxidation products (Fig. 3(B)).56,65–67 In addition, the release of Zn2+ from ZnO can promote the production of fibroblasts, which is essential for the proliferation and differentiation of myofibroblasts in the dermis during skin regeneration.68–70 Hadisi et al. prepared ZnO-containing hyaluronic acids-silk fibroin wound dressings, with the increase of ZnO content, the antibacterial activity of wound dressings against E. coli and S. aureus was enhanced, but a high concentration of ZnO (>3%, wt%) was toxic to cells. In addition, the dressings significantly reduced inflammatory response at the wound site, promoted burn wound healing and skin regeneration (stimulated epidermis, hair follicles, sebaceous glands, and promoted collagen deposition).64 Wang et al. used leaf extract of Coleus amboinicus to prepare ZnO nanoparticles, which showed excellent antibacterial activity against a variety of Gram-positive and Gram-negative bacteria, and could promote the healing of infected burns.71 Thanusha et al. synthesized ZnO composite scaffolds to reduce inflammation and increase tissue remodeling in second degree burn healing.72

In recent years, with the development of nanotechnology, the synergistic effect of coupling hybrid nanomaterials (bimetallic and multimetallic) to improve the antibacterial activity of nanomaterials has become a research hotspot.56 For instance, Li et al. reported a bimetallic CuCo2S4 NPs, which showed intrinsic peroxidase-like activity and could convert H2O2 into *OH at neutral pH. CuCo2S4 NPs could effectively destroy MRSA biofilms in vitro and promote burn healing of MRSA infection in vivo.73 Wang et al. prepared a hybrid multi-shelled hollow materials by coupling CuO and ZnO NPs with AuNPs (ZnO@CuO@Au NPS). Due to the combined action of PTT, PDT, Zn2+ and Cu2+ under 635 nm laser irradiation, it showed significant antibacterial effect against S. aureus (99.80%) and E. coli (97.5%) within 10 min after application.56


TiO2. The super-hydrophilic, photocatalytic properties, stable chemical properties and excellent biocompatibility of titanium dioxide (TiO2) NPs make them ideal candidates for the pharmaceutical industry, especially in bone tissue engineering nano-TiO2 bone scaffolds, biosensors and vascular implant manufacturing.74 In addition, the photocatalytic activity of TiO2 NPs makes the surface have antimicrobial properties under UV irradiation.75 Ismail et al. mixed TiO2 NPs into Gellan gum (GG) bipolymer to enhance its mechanical properties, antibacterial properties and biocompatibility. The results showed that the GG + TiO2-nanobiofilm had antibacterial activity (the inhibition zone against S. aureus and E. coli was 9 ± 0.25 mm and 11 ± 0.06 mm, respectively, which was similar to that of the penicillin control sample), promoted cell proliferation and growth, and facilitated wound healing.76 However, TiO2 has the photocatalytic activity of producing ROS, while the recombination of generated electrons and holes limits its photocatalytic performance and reduces its actual antibacterial effect.77 Recently, researchers have loaded antibiotics, metal NPs, and other antimicrobial elements onto TiO2 surfaces for antimicrobial applications.78,79 However, bacterial resistance caused by the antibiotic application and the potential cytotoxicity of metal NPs limits their clinical application. Therefore, Wang et al. used electrostatic force to assemble graphdiyne (GDY) onto TiO2 to combat implant infection by enhancing photocatalysis and prolonging antimicrobial activity. The nanofibers exhibited excellent photocatalytic performance and increased the production of photocatalytic ROS. The resulting ROS induces oxidation of cell components and perforation of bacterial cell walls, leading to membrane leakage, structural destruction, and ultimately bacterial death.77

In addition, TiO2 is also widely used in burn repair.80 For example, Seisenbaeva et al. produced TiO2 through the hydrolysis pathway of triethanolamine ligands modified TiO2, and the interaction between human blood and TiO2, resulted in the formation of reasonably dense gel composites materials. The composite material can prevent skin infection and inflammation and accelerate wound healing in burned rats.81 Kalirajan et al. explored the in vivo burn wound healing potential of TiO2 and bacterial cellulose (BC) nanocomposite (BC–TiO2). First, the physicochemical characterization of BC–TiO2 was characterized by SEM, XRD and FTIR. Second, antimicrobial experiments showed that the BC–TiO2 nanocomposite produces highly reactive species that disrupt the lipopolysaccharides and peptidoglycan components of cell membranes, thereby inducing cell death, which is consistent with earlier reported literature.82 Furthermore, the wound area and histopathology in the burn wound model were used to evaluate the healing effect of BC–TiO2 nanocomposites in vivo. In summary, BC–TiO2 nanocomposite dressings provide a sterile and favorable environment for skin repair.80

In another study, Zhang et al. prepared yolk–shell particles (YSPs) using trineedle coaxial electrospraying with a simple nonsolvent process (Fig. 4). Among them, TiO2–Ag NPs and ganoderma lucidum polysaccharides as the main antibacterial and antioxidant components were encapsulated into the outer shell of YDPs, and iron oxide (Fe3O4) NPs were combined into the inner core as a photothermal agent. Cell experiments showed that YSPs had good biocompatibility and antioxidant activity. The antibacterial test showed that YSPs had significant antibacterial activity against E. coli and S. aureus. In vivo burn wound healing in c57 mice demonstrated that the YSPs had low biological toxicity and could promote wound healing in some ways.83


image file: d2ma00695b-f4.tif
Fig. 4 (A) (a) Schematic illustrations of the trineedle coaxial electrospraying system and collection system. (b) Digital graph of the stable jetting mode. (c) Schematic illustration of the structure of the YSPs. (B) (a) Thermal graphs of the sample in EP tubes at determined time points (b) Peak temperature rise curves of the sample EP tubes of three groups. (1) YSP with MNP and TiO2–Ag group, (2) YSP containing TiO2–Ag without MNP group, (3) PBS group.83 Copyright 2013, ACS Publications.

Mesoporous silica NPs have good biocompatibility and have been used as promising drug and gene carriers.84 In addition, the silica NPs show high chemical stability, and the surface can be easily modified.85 The increased surface area combined with the pore distribution makes the therapeutic agents easy to load. Studies of SiO2 have shown that they are non-toxic and can be used for in vivo and biomedical applications.86,87 Kalirajan et al. prepared a hybrid scaffold of collagen, which was combined with a silica–resorcinol composite (Si@Res) to improve bioavailability and achieve better healing. The hybrid biomaterials have good biocompatibility for the blood cells and keratinocytes and have an excellent antibacterial property. In vivo results suggest that Si@Res composite contributes to scar-free wound healing (type I diabetes and chronic infectious burns in rats) by increasing TGF-β3 expression.88

Metal/metal oxides nanomaterials have good antibacterial and wound healing ability, and there is still great application and development potential in the future. However, it should be noted that metal/metal oxides nanomaterials are in direct contact with tissue in the wound, and the biosafety of the products must be considered before application. The metal/metal oxides nanomaterials can contact with blood cells in the blood vessels of the wound and enter the blood circulation. This phenomenon can cause hemolysis. Some metal/metal oxides nanomaterials, such as AgNPs and ZnO NPs, have been found to cause hemolysis. So we can adjust the physical and chemical properties of the material, or wrap biologically active substances such as polysaccharides onto the surface of the nanomaterials.

2.2. Antimicrobial agents

2.2.1. Antibiotics. Burn wound associated infection is one of the severe complications in the acute period after burn injury, and it is estimated that approximately 45% of post-burn mortality is associated with infection, such as those caused by P. aeruginosa or MRSA.89,90 The formation of infection can severely impair the proliferation of dermal cells, resulting in degeneration of the surface layer and part of the thickness to more profound tissue damage, thereby limiting dermal regeneration.91 Antibiotics are widely used in the treatment and repair of burn infection.92–94
Tetracycline. Tetracycline (TC) is one of the most effective antibiotics against bacterial infections, such as acnes, periodontal and urinary.95 In addition, TC has fluorescence properties, which is helpful to evaluate drug diffusion characteristics.96 Chen et al. prepared citric modified chitosan (CC) hydrogel containing the antimicrobial drug TC. The cumulative release of the drug was regulated by CC concentration, and the drug-loaded CC hydrogels showed enhanced antimicrobial activity against E. coli and S. aureus. In animal experiments, CC hydrogels loaded with TC accelerated wound healing in rats.97

In one study, Saito et al. loaded TC into nanosheets to evaluate the antimicrobial properties of the nanosheets in mice that were burned and infected with P. aeruginosa. By analyzing the viable count of bacteria at the wound site, histology and the amount of bacteria in the liver showed that the nanosheets had strong antibacterial activity, thus inhibiting burn infection.90


Minocycline. Minocycline (MC) is a broad-spectrum antimicrobial TC antibiotic than other family members (especially for burn wounds).98,99 MC is effective against both Gram-positive and Gram-negative bacteria and prevents cell death and increases cell proliferation in wound repair.100 Various drug delivery systems have been investigated to apply MC to burn wound healing.101,102 For instance, Mohebali et al. prepared a novel wound dressing based on nanocomposite film of polyvinyl alcohol (PVA) and halloysite nanotubes (HNT) loaded with MC. Drug release studies showed that the drug was slowly released from the nanocomposite and in accordance with the Korsmeyer–Peppas model.101 In addition, nanocomposites have antimicrobial effects against both Gram-positive and Gram-negative bacteria and can promote burn wound repair (Fig. 5).101 Recently, a layered biocompatible pH-sensitive antimicrobial composite membrane based on Halloysite nanotube/poly(lactic-co-glycolic acid)/chitosan (HNT/PLGA/chitosan) was prepared for the controlled release of MC on burn wounds.103 HNT composites were modified with different concentrations of PLGA and chitosan by a layer-by-layer strategy. Firstly, HNT lumens were etched with sulfuric acid to increase drug loading efficiency (base spacing is increased by dimethyl sulfoxide intercalation). Then, the outer surface of HNT was modified with APTES silane reagent. Subsequently, a PLGA coating was produced on modifying HNT using an LBL strategy and the solid-in-oil-in-water (s/o/w) emulsion system. Finally, the prepared HNT/PLGA suspension was coated with chitosan under acidic conditions. The results showed that the release of MC was slow and controlled. In addition, compared with pure HNT, the load of MC on etched intercalated HNT films increased by about twice, and both Gram-positive and Gram-negative bacteria were inhibited. The composite membrane loaded with MC can significantly promote the healing of burn wounds in rats.
image file: d2ma00695b-f5.tif
Fig. 5 Schematic of surface modification and synthesis of HNT/PVA nanocomposites and drug loading within the HNT lumen. Add HNT to the toluene and stir. Then, TEA and APTES were added to the obtained suspension, and the mixture was refluxed at 80 °C in a nitrogen atmosphere for 24 h to obtain HNT-APTE. The minocycline molecules in its saturated solution are loaded with pH control into the HNT lumen, and the material is added to PVA hydrogels and glycerol and cast as a film.101 Copyright 2020, Elsevier.

In another study, Kaur et al. used a polyvinyl alcohol–sodium alginate (PVA–SA) hydrogel wound dressing system for topical delivery of MC to treat infected burns.104 The cytocompatibility and antibacterial properties of hydrogels were evaluated by in vitro antibacterial assays, elution assays and cytotoxicity tests. After 24 h incubation of RAW 264.7 macrophage cell lines and SK-1 skin epithelial cell lines with PVA–SA hydrogel extracts, the average cell viability of RAW 264.7 and SK-1 was 94.25% and 95.4% respectively. The results showed that the PVA–SA hydrogel had good cytocompatibility and could be used for further experiments in vivo. The zone of inhibition assay showed that a clear inhibition zone was observed around the PVA–SA film coated with MC. The elution profile showed that 99.9% of antibiotics were released within the first 15 minutes. In summary, PVA–SA membranes can be used as commercial wound dressings to deliver novel antimicrobial compounds against antibiotic-resistant pathogens in localised infection situations.


Gentamicin. Gentamicin is a traditional broad-spectrum aminoglycoside antibiotic used to treat skin, soft tissue and wound infections, such as, chitosan containing gentamicin nano-biocomposite membrane to accelerate wound repair.26,105 In another study, Lan and his team impregnated gelatin microspheres (GMs) with the antibiotic gentamicin sulfate (GS) and then embedded the GMs in a silk fibroin (SF) to fabricate GS/GM/SF scaffolds. GS/GM/SF scaffolds not only significantly reduced the burn infection of P. aeruginosa, but also accelerated the regeneration of dermis.106,107

In another study, Zilberman et al. developed a double-layer wound dressing with a top layer of gentamicin-containing porous poly(DL-lactic acid-co-glycolic acid) to prevent and/or fight infection, and a bottom layer of spongy collagen designed to maintain high absorbability of wound exudates and to accommodate newly formed tissue.108 Three different gentamicin-loaded emulsions (BSA, SPAN and BSA2) were used to study drug release kinetics. BSA samples usually showed a relatively high burst release of gentamicin (38.4 ± 4%), followed by a release of 80% within 4 days. SPAN formulation had a lower burst release rate (8.2 ± 2%), with a total release of 84 days. BSA2 agents exhibited intermediate drug release behavior (medium burst release and medium release rate). In addition, second-degree burns in guinea pigs were used as a wound-healing model to test the healing potential of hybrid wound dressings. Pseudomonas was applied topically immediately after the infliction of the burns to mimic burn contamination that typically occurs in patients with burns. Results showed that the hybrid dressing loaded with gentamicin significantly accelerated wound healing (28%), which is at least double that obtained by the Melolin® and Aquacel® Ag formats (8–12%). The dressings also promoted angiogenesis, epithelialization, collagen formation, and reduced mononuclear infiltration at the wound site. In short, gentamicin-slow releasing hybrid dressing materials offer a potentially valuable and economical method for treating life-threatening complications of burn-related infections.108

In addition, datoromycin is a novel cyclic lipopeptide antibiotic with selective activity against aerobic, anaerobic and facultative Gram-positive bacteria.109,110 Simonetti et al. treated burn wounds caused by MRSA infection with datoramycin.111 Fusidic acid (FA) is an antibiotic derived from the fungus Fucidium coccinuem, belonging to the BCS 3 category. FA blocks bacterial protein synthesis by binding to EF-G on bacterial ribosomes, thus inhibiting bacterial translation.112 Thakur et al. combined FA with lipid–polymer hybrid NPs (LPHNs) to treat of MRSA-infected burn wounds.113

Although antibiotics plays an essential role in the treatment of infections, however, antibiotic drug-resistant bacteria is inevitable. The emergence of antibiotic resistance can be attributed to several reasons.114 First, bacteria are unicellular micro-organisms, and their reproduction can occur rapidly through binary division.115 In addition, their small size increases the chance of local population variation, which leads to continued growth and evolution, and increased adaptability against antimicrobial agents.116 Furthermore, the cost of survival for maintaining this evolutionary resistance has proven to be low because antimicrobial organisms rarely lose resistance even in the absence of threatening agents.114 Finally, traditional antibiotic treatment is associated with overprescribing and improper use, ultimately leading to a gradual rise in antibiotic resistance in a variety of pathogens.114

2.2.2. Antimicrobial peptides. Antimicrobial peptides (AMPs) are natural or synthetic polypeptide molecules. Most AMPs have cationic characteristics due to the prevalence of basic residues.3,117,118 AMPs, which do not easily develop drug resistance, can also be used as immunomodulating and antiviral agents. AMPs themselves represent the first line of defense against invading pathogens and are a vital part of the innate immune system of many organisms.119,120 AMPS as an antimicrobial agent can destroy/kill a variety of microorganisms. The main mechanism of action is to attach and destroy negatively charged phospholipids of the microbial membrane through simple electrostatic interaction, inhibit microbial proteins and nucleic acids leading to the decomposition/perturbation of the latter, and inhibit/kill microorganisms. Therefore, they can be used to treat burn infections.3,118,121,122

More than 5000 natural and synthetic antimicrobial peptides have been discovered to date.123 Natural AMPs such as bovine lactoferrin (lactotransferrin, LTF) have been introduced as potential antimicrobial agents for the treatment of infectious diseases.124 LTF is a glycoprotein composed of 689 amino acid residues, which contributes to the transport and regulation of iron in cells and stimulates the proliferation of lymphocytes and the phagocytic activity of macrophages. LTF is an integral part of the human immune system.124 The synthetic AMPs also showed excellent antimicrobial activity (such as against P. aeruginosa and MRSA).117,125P. aeruginosa can cause sepsis and S. aureus can cause chronic infection, both of which are considered to be representative pathogens involved in burn infection.126,127

P. aeruginosa is the most common Gram-negative bacterium on burn wounds, eventually colonizes over 70% of burn wounds. More than 95% of Pseudomonas organisms may be resistant to multiple antibiotics.128 Therefore, inhibition of P. aeruginosa on burn wounds is significant to repair. For example, a short synthetic AMP, PXL150, has broad-spectrum bactericidal activity against both Gram-positive and Gram-negative bacteria, as well as Candida spp, and has shown anti-inflammatory properties in human cell lines.129,130 Moreover, Bjorn et al. evaluated the anti-infective effect of PXL150 in hydroxypropyl cellulose (HPC) gel against P. aeruginosa infection burn mouse models in vitro and in vivo the safety of PXL150 in rats and rabbits. The minimum concentration analysis showed that PXL150 had a significant bactericidal effect against P. aeruginosa in vitro. In non-clinical safety studies, PXL150 has demonstrated good safety after repeated systemic and local administration in rats and rabbits, respectively. Therefore, PXL150 has the potential to be an effective and safe drug candidate for the treatment of infected burns.122 Recently, Mohamed et al. synthesized short β-sheet folding peptides (IRIKIRIK, IK8L), the IK8L can inhibit biofilm in the growth of MDR P. aeruginosa, and IK8L has the development tendency is lower resistance than conventional antibiotics (repeated use of IK8L does not cause drug resistance), and it has an excellent effect on the treatment of MDR P. aeruginosa infected burn wounds.121 In one study, Pan and his team showed that unnatural amino-acid-based star-shaped poly(L-ornithine)s have significant proteolytic stability, excellent biofilm destruction ability, and broad-spectrum antibacterial activity, especially against P. aeruginosa.126 In a mouse model of skin burns infected with P. aeruginosa, star peptides can reduce the microbial burden in the infected area and promote burn healing (Fig. 6).


image file: d2ma00695b-f6.tif
Fig. 6 (A) (a) The structure of PEI-g-PLO. (b) Synthetic route of star-shaped polypeptides. (c) 1H NMR spectra of representative star-shaped polypeptides PL2 (red) and PO3 (blue). (d) GPC chromatograms of star-shaped polypeptides. The structure of only one arm of the star-shaped polypeptide is shown in panel (b). (B) Biofilm disruption of the star-shaped polypeptides. (a) Quantitative determination of the biofilm-disrupting capacity of PO3, PL2, PH2, polymyxin B (PMB), or PBS by measuring the absorbance of CV-stained biofilms of P. aeruginosa (n = 3). (b) Bacterial count enumeration of P. aeruginosa biofilms treated with PO3, PL2, PH2, polymyxin B (PMB), or PBS (n = 3). (c) Schematic illustration of biofilm-disrupting property of star-shaped polypeptides. *p < 0.05, **p < 0.01, and ***p < 0.001; n.s.: nonsignificant.126 Copyright 2020, Wiley.

S. aureus is the most common pathogenic microorganism for skin infections and the second most common cause of hospital bloodstream infections.131S. aureus are resistant to all currently available β-lactam antibiotics, including penicillin and cephalosporin, and are commonly referred to as MRSA.132S. aureus and MRSA are the leading causes of morbidity in thermally injured patients.133 When MRSA enters the burn wound, it may lead to serious invasive diseases, such as sepsis, endocarditis, toxic shock syndrome, and necrotizing pneumonia, by evading the body's natural protective mechanisms.134 In the context of increasing antibiotic resistance, AMPs, as new anti-infective agents, have been favored by researchers due to their broad-spectrum activity, multiple action modes, rapid killing kinetics, minimal host toxicity and low sensitivity to multi-drug resistance mechanisms.135 In an investigation, Ma et al. evaluated the effect of a novel engineered amphiphilic peptide WRL3 (WLRAFRRLVRRLARGLRR-NH2) on burn infection with MRSA. Studies have shown that WRL3 may exert its bactericidal activity by destroying the bacterial membrane and promoting the healing of MRSA infections of skin burn wounds.134

In addition, Obuobi and his colleagues used the high binding affinity between polyanionic DNA nanostructures and cationic AMPs (L12 peptides) to create hydrogels.136 Specific methods: using the unique self-recognition of DNA bases and the electrostatic interaction between polyanionic DNA and cationic peptides, Y-shaped nanostructured “monomers” are cross-linked with complementary sequences on the L-linker to form a physically cross-linked hydrogel network that immobilizes AMPs. In vitro L12 release studies showed that the DNA hydrogel was relatively stable for 24 h in the absence of DNase. In the presence of 10 U mL−1 DNase I, L12 was released with a half-life of 3 h and was released entirely by 12 h before. At the concentration of 60 U mL−1 DNase I, the half-life was 0.5 h, and it was wholly released in 1.5 h. In the presence of S. aureus, in vitro gel degradation test was conducted to verify the antimicrobial activity of hydrogels. The results showed that DNase was produced by S. aureus (ATCC 29,737) and MRSA (DR09808R) to degrade the hydrogels, followed by the release of L12, resulting in an antimicrobial effect. The system has potential applications in AMP delivery and skin wound treatment in the future.

Although AMPs are superior to antibiotics in terms of drug resistance, the clinical development of AMP drugs still has the following shortcomings: firstly, unstable proteolysis in vivo, low permeability across biological barriers, and significant systemic toxicity caused by non-target effects.136,137 Secondly, covalent fixation of AMPs on polymer scaffolds is often limited, such as reduced antimicrobial activity, the use of toxic crosslinkers, and the characterization of covalently bound AMPs on hydrogel scaffolds is difficult to determine.138–140 Furthermore, the lack of good models or evaluation methods for compound screening may be responsible for the mismatch between in vitro and in vivo efficacy.123 In the future, the expanding catalogues of self-assembling protein domains, AMPs and targeting ligands, as well as newly developed nanobiotechnological approaches, are expected to lead to a new generation of rational AMPs for safer, highly efficient and more selective treatment of bacterial infections in the short term.

2.2.3. Drugs. Silver sulfadiazine (AgSD) is a topical antibacterial agent for burn wounds in clinical practice, which has antibacterial effect against multi-drug resistant bacteria such as MRSA.141,142 Many studies have shown that AgSD-based antimicrobial materials can be used to treat burn wounds.142–144 In an experiment, Ito et al. prepared poly(lactic acid) (PLA) nanosheets loaded with AgSD, which could slowly release Ag+ ions for more than 3 days and had no significant cytotoxicity on fibroblasts at the dose of AgSD. In addition, it has shown antibacterial efficacy against MRSA in vitro tests. In animal studies, the nanosheets significantly reduced the number of MRSA bacteria at the injury site (more than 105 fold) and inhibited inflammation, thus speeding up the burn wound healing process.142 In another experiment, Kumar loaded AgSD into the carbopol gel, reducing the toxicity of the drug immediately released to the target area. The optimized microgel enhanced the retention of the drug in the skin layers (3 fold higher than the commercially available product). The antibacterial effect of S. aureus and P. aeruginosa was similar to that of commercial products. In vitro burn experiments showed that the gel containing AgSD reduced the cytotoxicity of skin cell lines and promoted the contraction of burn wound.143 Recently, Thakur et al. have incorporated silver sulfodiazine into egg oil-organogel (SSD-EOOG) through a design quality method, the system enhances drug penetration (72.33 ± 1.73%) and retention efficacy (541.20 ± 22.16 μg cm−2). Therefore, the SSD-EOOG improves topical delivery drugs of burn wounds and patient compliance.144
2.2.4. Biopolymers. Biopolymers are biocompatible and can expand by absorbing liquids through their polymeric networks. Thus, they provide a suitable matrix to stimulate the healing cascade, mimicking the extracellular matrix environment in a moist medium.145,146 Among various biopolymers, chitosan has been extensively used in wound healing.147,148 Chitosan is a polymeric compound found in nature with good biocompatibility and biodegradation. Chitosan is a highly basic, natural, cationic and mucosal adhesion polysaccharide composed of β-1,4-linked 2-amino-2-deoxy-β-D-glucose (deacetylated D-glucosamine) and N-acetyl-D-glucosamine units, and it is a kind of a bioactive compound with a variety of biological properties, such as antifungal, antimicrobial and antioxidant activities.146,149 Chitosan NPs can be generated by the complex coacervation method, ionotropic gelation, coprecipitation method, emulsification solvent diffusion and reverse micellar method.150

Recently, temperature-sensitive chitosan (TCTS) hydrogel was synthesized by β-glycerolphosphate, acetic acid and chitosan. Then, its potential for wound healing in burn patients was evaluated both in vitro and in vivo rat models.151 The cytotoxicity of TCTS hydrogel was detected by human foreskin fibroblast cells (HU02). It was found that there was no significant difference in the activity of HU02 cultured on TCTS hydrogel compared with the control group. Animal experiments showed that burn wound healing, re-epithelialization and wound closure were significantly faster in TCTS hydrogel group than in the control group. In general, TCTS hydrogel is an excellent wound dressing for burn infected full-thickness wounds.

Although chitosan NPs have antibacterial effects, their exact mechanism of action is still under discussion. Various hypotheses on the mechanism of chitosan antimicrobial action: polycationic nature of chitosan, binding to bacterial DNA (inhibition of mRNA), chelation agent (nutrients and essential metals), and blocking agent (Fig. 7).152


image file: d2ma00695b-f7.tif
Fig. 7 Four models of chitosan action on Gram-positive and -negative bacteria: (1) the interaction between positively charged chitosan molecules and negatively charged microbial cell membranes increases the permeability of bacterial membrane, leading to leakage of intracellular components and cell death. (2) Intranuclear binding of chitosan to DNA of target microorganism inhibits mRNA activity, thereby inhibiting protein synthesis. (3) Chitosan selectively binds essential metals, thereby inhibiting microbial growth and toxin production. (4) Chitosan can form a membrane barrier on the surface of bacterial cells, preventing nutrients and oxygen from entering the bacteria, thus inhibiting bacterial growth.

Hypothesis 1: the interaction between positively charged chitosan molecules and negatively charged microbial cell membranes increases the permeability of the bacterial membrane, leading to leakage of intracellular components and cell death. Several research results support this hypothesis: for example, to improve the water-solubility and antimicrobial activity of chitosan, Yan et al. prepared a new chitosan derivative, 3,6-O-[N-(2-aminoethyl)-acetamide-yl]-chitosan (AACS). AACS could reduce surface hydrophobicity, cell viability, and intracellular proteins by increasing membrane permeability. The results of SEM further confirmed the bacterial membrane collapse and disruption caused by AACS.153 The direct relation between chitosan antibacterial effect and its degree of deacetylation (DD) is associated with the number of its protonated amine groups.154 For chitosan with DD > 81.35%, the minimum inhibitory concentrations against E. coli and S. aureus was 0.0625% and 0.0313%, respectively. For chitosan with DD = 100.00%, the minimum bactericidal concentration against both E. coli and S. aureus was 0.0156%. The antimicrobial activity of chitosan was due to the amino protonation and cationization of its molecular side chains in acidic solutions. E. coli and S. aureus were initially inhibited, and the cells were gradually broken and decomposed.155 In conclusion, these findings all support the hypothesis that the antimicrobial action of chitosan is attributed to its effect on cell membranes. At present, this hypothesis is generally accepted by most researchers.

Hypothesis 2: intranuclear binding of chitosan to DNA of target microorganism inhibits mRNA activity, thereby inhibiting protein synthesis. Typically, chitosan of low molecular weight (≤50 kDa) can penetrate bacterial cell walls and inhibit DNA transcription.154 In a study, the chitosan–ferulic acid conjugate CFA may inhibit the mRNA expression of mecA gene and thus inhibit the activity of MRSA.156 In another study, confocal laser microscope showed that chitooligomers down-regulated DNA in E. coli.154 Hypothesis 3: chitosan selectively binds essential metals (such as Ca2+ and Mg2+, which play an important role in bacterial metabolism), thereby inhibiting microbial growth and toxin production. The chitosan–metal complex helps to obtain a higher positive charge, which leads to better antimicrobial activity.152,157 Hypothesis 4: chitosan can form a membrane barrier on the surface of bacterial cells, preventing nutrients and oxygen from entering the bacteria, thus inhibiting bacterial growth.152

Currently, many studies have shown that chitosan-based NPs has a higher killing effect than chitosan alone.158 For instance, Luna-Hernandez et al. prepared CS/nAg nanocomposites by chemical reduction method. A fixed weight of CS and various ratios of 0.01, 0.025, 0.05 and 0.1 M for silver sources were applied for preparing the CS/nAg nanocomposites. The formation of nAg was confirmed by the characterization of CS/nAg by UV-Vis and FTIR. In vitro antibacterial experiments showed that CS/nAg nanocomposite showed high antibacterial activity against S. aureus and P. aeruginosa. Thermal burns treated with CS/nAg nanofilms, and 7 day results showing the presence of epidermis and orthokeratosis, as well as dermal papillae and hair follicles. In addition, dense myofibroblast populations and angiogenesis can be seen, indicating that tissue damage is in a stage of proliferative and healing due to epithelial differentiation.159 In another research, Abid et al. prepared polyethylene oxide–chitosan (PEO–CS) nanofibers and studied the rheological properties of PEO–CS and the optimized process parameters of nanofibers using response surface methodology. The PEO–CS nanofibers were successfully electrospun with a very small standard deviation at a lower voltage, and the zinc oxide-loaded nanofibers showed better thermal stability and antibacterial activity. The nanofiber is expected to be a candidate material for the prevention or treatment of burns.160

In addition, CS can also be combined with antimicrobial agents, metallic antimicrobial particles, and natural compounds to enhance the antimicrobial effect.161,162 For example, Chen et al. prepared hydroxylated lecithin complexed iodine/carboxymethyl chitosan/sodium alginate composite membrane (HLI/CMCS/SA) by microwave drying and explored the potential value of composite membranes as wound repair dressings using the infection of a rat model of the seawater immersed wound infection of deep partial-thickness burns.161In vitro antibacterial experiments showed that HLI/CMCS/SA composite membranes could effectively inhibit Gram-positive bacteria (Staphylococcus aureus and Enterococcus faecalis) and Gram-negative bacteria (Pseudomonas aeruginosa, Escherichia coli, Acinetobacter bauman and Vibrio vulnificus). Animal experiments showed that the wound healing rate of the HLI/CMCS/SA composite membranes group was higher than that of the control group at the 4 th, 8 th and 16 th days, indicating that the composite membranes could effectively promote the healing of the seawater immersed wound infection of deep partial-thickness burns. Seawater soaked wounds are susceptible to infection by Gram-negative bacteria.163 Therefore, HLI/CMCS/SA composite membranes can be used as a repair dressing for seawater immersed wounds. In another work, Kamakshi and his team modified acellular dermal matrix (ADM) by a dual cross-linking method called CsADM-Cl (using chitosan for ionic cross-linking and an iodine-modified 2,5-dihydro-2,5-dimethoxy-furan cross-linking agent for covalent cross-linking). CSADM-CL has good antibacterial activity and angiogenic ability. In addition, CSADM-CL can treat full-thickness burns and shows rapid healing characteristics.162

Although CS has significant antimicrobial activity against various fungi and bacteria, the following problems need to be overcome in the future. First, chitosan cannot be well dissolved in neutral and alkaline pH. Second, the human toxicity of CS or CS-based NPs needs further investigation. Furthermore, the bactericidal activity of chitosan itself hinders its development, and subsequent modifications should be made to enhance its antibacterial activity and biocompatibility.

3. Application of antibacterial chitosan biomaterial in burn

The high water content of hydrogels provides a moist environment for the wound, thus enhancing the cellular immunological response during the healing process. Therefore, the potential of hydrogels in wound healing has received extensive attention. However, a highly hydrated environment of hydrogels is also attractive to pathogenic microorganisms and increases the risk of microbial infection. So endowing hydrogels with antibacterial properties is the primary problem in the development of wound dressing.

Chitosan has been widely used in burn repair due to its excellent biocompatibility, degradability and antibacterial activity (Table 1).151,164 Ouyang et al. developed a new type of dressing by incorporating marine peptides (MPs) into chitosan hydrogels.165 And it has been shown to be a good restorative effect on burn treatment. Moreover, Bano et al. studied the antibacterial and wound healing properties of chitosan–polyvinyl alcohol combined dressing.166 The results showed that chitosan had obvious antibacterial effect on pathogenic bacteria. Second degree burns on rabbits showed that chitosan wound dressing could promote the formation of granular and fibrous connective tissue.

Table 1 Function and application of different types of antibacterial chitosan hydrogels
Chitosan hydrogels Hydrogel types Characters Functions Animal model Ref.
In situ injectable chitosan hydrogels Silk fibroin hydrogel In situ forming hydrogel, injectable SF hydrogel not only promotes wound healing but also shows transitions from inflammation to proliferation stage. The full-thickness third-degree burn wounds, wistar albino rats. 165
Methylcellulose (MC) hydrogel Thermo-responsive, injectable MC hydrogel with silver oxide NPs exhibited an excellent antimicrobial activity and burn wound healing effect. Second-degree burns, Sprague-Dawley rats. 45
Supramolecular host–guest gelatin (HGM) hydrogel Shear-thinning, injectability It improved the inflammation of wounds caused by high ROS and oxidative stress, enhanced angiogenesis and accelerated wound healing. Full-thickness burn wounds, Sprague Dawley rats. 162
AG-OD-Fe(III) hydrogels Shape adaptability, injectable, self-healing capability, strong adhesion. The hydrogel promoted burn wound healing by decreasing the expression of proinflammatory cytokines, promoting angiogenesis and promoting collagen deposition. Deep second-degree models, Kunming mice. 178
Conductive polymeric chitosan material QCSG/GM/GO hydrogels Injectable, antimicrobial, conductive. This hydrogel had good antibacterial property and wound healing ability. MRSA infected full-thickness skin defect model, Kunming mice. 198
OHA-AT/CEC hydrogels Degradable, conductive, anti-oxidant This hydrogels accelerated wound healing rate with higher granulation tissue thickness, collagen disposition and more angiogenesis. Full-thickness skin defect model, Kunming mice. 174
CP/OD hydrogels Shape memory copolymers with electroactivity, super stretchability and tunable recovery temperature The electroactive, highly stretchable, biodegradable shape memory polymers with tunable recovery temperature near the body temperature have great potential in skeletal muscle tissue engineering application. 195
Antibacterial phototherapy chitosan hydrogel Nd–Ca–Si silicate glasses and alginate composite hydrogels Photothermal property, emit fluorescence, temperature monitoring. This implantable material with unique temperature monitoring, photothermal function, and wound healing bioactivity can be used for localized thermal therapy. Second-degree skin burn model, mice BALB/c. 205
CEC/PF/CNT hydrogel Conductive, self-healing and adhesive The conductive photothermal self-healing nanocomposite hydrogels as multifunctional wound dressing exhibit great potential for the treatment of infected wounds. A mouse full-thickness skin wound-infected model 204
CSDP-PACT hybrid hydrogel Portable, light-triggered, antibacterial theranostic-platform The hydrogels augmented wound healing by effective inhibition of bacterial growth,controlled inflammation, higher collagen deposition, and rapid epithelialization MDR-S. aureus infected burns, Balb/c mice. 206


3.1 In situ injectable chitosan hydrogel

Hydrogels are hydrophilic 3D materials with a large amount of water in their structure, and they have the characteristics of pH-/temperature-/light-responsive and good biocompatibility.167 The preparation methods of hydrogels are mainly focused on cross-linking, including physical cross-linking (caused by interactions between hydrogen bonds, van der Waals interactions, hydrophobic or electrostatic interactions) or chemical cross-linking (formed by covalent bonds and interactions between various functional groups). Therefore, in the polymerization process, different crosslinking methods can form different polymer structures, such as linear copolymers or graft copolymers.168 A variety of hydrogels that can respond to external stimuli, including magnetic fields, temperature, light, enzymes, and electric fields, have been studied to meet various practical needs.169–173

For example, Qu et al. designed a multifunctional injectable hydrogel dressing that combines electrical conductivity, ideal antioxidant capacity, and antibacterial properties to meet the growing need for skin damage.174 This hydrogel was prepared based on the formation of the Schiff base bond between an oxidized hyaluronic acid-graft-aniline tetramer (OHA-AT) and N-carboxyethyl chitosan (CEC). At the same time, the antibiotic amoxicillin was in situ encapsulated in the hydrogel to enhance the antibacterial properties of the conductive hydrogel dressing. The chemical structure, electroactivity, conductivity, equalized swelling behavior, rheological properties, cell compatibility, antioxidant capacity, antibacterial activity, and wound healing effect of hydrogels were characterized entirely. The rheological properties of OHA-AT5/CEC hydrogel showed the highest storage modulus of 1400 Pa among all these hydrogels. With the increase of AT, the storage modulus of hydrogel decreases gradually. The degradability of hydrogels was evaluated in vitro (PBS at pH 7.4 as a medium). After 9 days of incubation, the OHA-AT5/CEC hydrogel showed a mass loss of 88%, which indicates that the hydrogel formulations had good biodegradable properties and can be used for further in vivo application. In addition, the four-point probe method was used to test the conductivity of the hydrogel samples. The hydrogel showed a conductivity of 0.05 mS cm−1, with the addition of AT segments in the hydrogels, the conductivity of the hydrogels increased from 0.09 mS cm−1 to 0.42 mS cm−1 (within the skin conductivity range: 1 × 10−4 mS cm−1 to 2.6 mS cm−1). Dressings with skin-like electrical conductivity can facilitate the healing process.175 The antibacterial properties of the drug-loaded hydrogels were tested by the zone of inhibition (ZOI) experiment. Compared with unloaded hydrogels, amoxicillin encapsulated hydrogels (2 mg amoxicillin per ml hydrogels) showed significant inhibitory zones against S. aureus and E. coli on the first day, indicating the cumulative diffusion of amoxicillin to the surroundings which inactivated bacteria in the respective areas. During the in vivo wound healing trial, OHA-AT/CEC hydrogels reduced inflammatory infiltration and increased fibroblast density and collagen deposition, as well as granulation tissue thickness.174

The injectable hydrogel scaffold can be easily implanted and covered over tissue defects of any shape, as a promising minimally invasive procedure that can reduce patient pain.176–180 However, infections during or after injecting scaffold remains an inevitable disadvantage, which reduces the therapeutic effectiveness of tissue repair. Therefore, there are still many problems in practical applications to be solved in the future research.

3.2 Conductive polymeric chitosan hydrogel

The human body has endogenous bioelectric system. The skin, composed of dermis, epidermis and corneum, is one of the sensitive tissues to electrical signals, and owns conductivity values from 2.6 mS cm−1 to 1 × 10−4 mS cm−1.175–177 The surface of intact human skin is more negatively charged than deeper skin layers.178 However, when there is a defect or wound in the skin, the deeper cells in the epidermis and the cells in the wound are positively charged. The combination of the positively charged wound and negatively charged surrounding intact skin creates an endogenous skin battery. Any damage to its structural integrity leads to a short circuit that generates a current vector at the perimeter of the wound which acts to guide cell migration towards the wound centre, thus directing wound healing.179 This bioelectric current facilitates wound healing best when the wound tissue is moistened.180 Many studies have shown that electrical stimulation and electroactivity contribute to good adhesion, proliferation, migration and differentiation of electrical signal-sensitive cells such as nerve, muscle, cardiac, keratinocytes, myoblasts, fibroblasts, cardiomyocytes, osteoblasts and mesenchymal stem cells, etc.181–191 Therefore, the design of new functional wound dressing with electrical conductivity will be more helpful to promote the wound healing process. Currently, studies have been conducted to incorporate conductive polymers into scaffolds and dressings.192 The increased electrical conductivity of polymers can facilitate therapeutic applications, such as electrical stimulation of wound areas, increase antimicrobial activity, scavenge free radicals and can control the release of pharmaceutical and biological agents.193,194

In addition, smart materials with dual responses have made great progress in tissue repair. Qu et al. developed injectable antibacterial conductive hydrogels with dual response to an electric field and pH for localized “smart” drug release.195 Hydrogels were prepared by mixing a chitosan-graft-polyaniline (CP) copolymer and oxidized dextran (OD). Conductive antimicrobial hydrogels are realized through the inherent antimicrobial properties of chitosan and polyaniline.196,197 After doping CP with 1 M HCl, a new absorption peak appeared at 435 nm, and π–π* transition of the benzene ring was observed to slightly shift blue to 292 nm. Electroactive materials could be converted to electrical conductors by reversible ion exchange, depending on the transition between the oxidized and reduced states of the material. The conductivity of CP/OD3 hydrogels under swelling conditions was 6.9 × 10−2 S m−1, and the conductivity of these hydrogels (CP/OD1, CP/OD3 and CP/OD5) was increased by adding polyaniline to chitosan, which were 7.6 × 10−2 S m−1, 7.8 × 10−2 S m−1, and 7.9 × 10−2 S m−1, respectively. Electrical response to drug release was performed using an “on-off” pulse release. Amoxicillin/ibuprofen-loaded hydrogel (1.5 mg amoxicillin/ibuprofen loaded in 1 mL CP/OD3 hydrogel) was applied at 3 V for 3 minutes and were repeated after half an hour. In the absence of any voltage, there was a slow release in the first 30 minutes, and a significant increase in the release rate of amoxicillin was observed in the following 3 minutes when 3 V was applied, while the same release behavior was observed in the subsequent cycle. In an in vitro model, the pH response behavior was verified by drug release of hydrogels in PBS solutions with different pH values (pH = 7.4 or 5.5). In the initial burst release period, the release rate of amoxicillin in CP/OD1 hydrogel in an acidic environment (pH = 5.5) was significantly faster than that in a physiological environment (pH = 7.4). At pH 5.5, approximately 55% of the drug was released during the initial burst phase after incubation for 45 min, and approximately 99% of the drug was released during 36 h. However, for the hydrogels in PBS at pH 7.4, only 23% of the drug was released after 45 min, and the total cumulative release percentage of the hydrogels was approximately 55% after 36 h. These results indicate that these pH-sensitive hydrogels released significantly more drugs in acidic environments and less drugs in physiological environments, which is important for their practical application as a “smart” pH-sensitive drug carriers.195

In another study, Liang et al. used GO endowed photothermal properties and conductivity of glycidyl methacrylate functionalized quaternized chitosan/gelatin methacrylate/graphene oxide hydrogels (QCSG/GM/GO). QCSG/GM/GO hydrogels showed a significant temperature increase within 1 min, while the temperature of the hydrogels without GO only fluctuated slightly. In addition, the temperature of QCSG/GM/GO0.5 hydrogel increased only 12 °C, the QCSG/GM/GO1 hydrogel increased by 19 °C, and the QCSG/GM/GO2 hydrogel rose by 23 °C after 10 minutes of NIR irradiation. Therefore, the content of GO can be regulated to achieve the purpose of antibacterial. On the other hand, the conductivity of QCSG/GM/GO hydrogel increased with the addition of GO. When GO content was 0%, 0.5%, 1% and 2%, the electrical conductivity was 0.97 ± 0.052, 2.29 ± 0.26, 4.64 ± 0.36 and 10.07 ± 2.69 × 10−2 S m−1, respectively, which made our hydrogel a good candidate material for skin wound dressing.198

The various conductive materials mentioned in this review show promising function or potential in wound management or skin tissue engineering, but they have the following limitations for clinical application: (1) biocompatibility and stable expression of conductive materials. (2) Controllability and durability of materials under an electric field. (3) The controlled and delivery of drugs and other bioactive substances. (4) Clinical safety issues. Despite these limitations, conducting polymers merit further scientific research in wound healing and skin tissue engineering.

3.3 Antibacterial phototherapy chitosan hydrogel

Antimicrobial phototherapies, such as photothermal and photodynamic therapies, have attracted considerable attention in treating of infected wounds due to their targeted selectivity, non-invasiveness, remote controllability and biological safety.199–201 When the photothermal wound dressing is irradiated by NIR light, PTT kills microorganisms by raising the local temperature (>50 °C) and causing physical damage (thermal damage) to bacteria.202 These photothermal materials (including photosensitizer and metal materials) exhibit excellent mechanical, stable photothermal and electronic properties, so they have been extensively studied in tissue engineering research in recent years.203,204

Based on CEC and benzaldehyde-terminated Pluronic F127/carbon nanotubes (PF127/CNT), He et al. developed a series of conductive self-healing and adhesive nanocomposite hydrogels with significant photothermal antibacterial properties.204 The addition of CNTs made hydrogels have photothermal antibacterial activity in vitro/in vivo. To study the photothermal properties of the CEC/PF/CNT hydrogel, the hydrogel was exposed to a NIR laser for 10 minutes, and the thermal map of the hydrogel was recorded by an infrared thermal camera. The results showed that the infrared thermograph without CNT hydrogels was similar to the surrounding environment. By introducing CNTs, the photothermal response was improved obviously. The ΔTs of CEC/PF/CNT1, CEC/PF/CNT2, CEC/PF/CNT3 and CEC/PF/CNT4 increased 16.6, 18.8, 21.1 and 22.6 °C, respectively, indicating that the hydrogels exhibited photothermal behavior by incorporation of CNT. Therefore, the photothermal activity of NIR induced CEC/PF/CNT2 against E. coli and S. aureus was further tested. The CEC/PF/CNT0 group showed no antibacterial efficiency after 10 min of NIR irradiation. The killing rates of CEC/PF/CNT2 hydrogel against S. aureus and E. coli were about 45% and 63%, respectively, after 1 min of NIR radiation. When the NIR exposure time was increased to 5 min, more than 80% of the bacteria were killed. In addition, when the irradiation time was extended to 10 min, no bacteria survived and both S. aureus and E. coli were killed by 100%. Therefore, the hydrogel has an excellent response to NIR stimulation and significant photothermal antimicrobial activity. In another study, Ma et al. reported a multifunctional Nd–Ca–Si silicate glass and glass/alginate composite hydrogel, which not only has photothermal properties, but also emit fluorescence under 808 nm laser irradiation. In particular, its fluorescence intensity is linearly related to the in situ temperature. The composite hydrogel can be used in fluorescent temperature measurement, photothermal therapy and burn tissue repair and other applications.205

The development of multifunctional biomaterials is of great significance for the treatment of burn infection in the future. Mai et al. constructed carboxymethyl chitosan (CMCS)-sodium alginate hybrid hydrogel (CSDP), which was loaded with porphyrin photosensitizer sinoporphyrin sodium (DVDMS) and poly (lactic-co-glycolic acid) (PLGA) coated basic fibroblast growth factor (bFGF) nanospheres, for the treatment of burn by photodynamic antimicrobial chemotherapy (PACT). CSDP hydrogel showed excellent antibacterial and anti-biofilm activities, nearly eradicating 99.99% of S. aureus and MDR S. aureus (producing ROS to enhance the bactericidal effect) in vitro. KEGG analysis revealed that after PACT, multiple signaling pathways of multidrug resistance in MDR S. aureus were altered, including the ribosome related pathway, the arginine and peptidoglycan pathway, and the oxidative stress related pathway. In a burn infection model, CSDP-PACT hydrogel effectively inhibited bacteria growth and promoted wound healing. In conclusion, CSDP hydrogel is a light-triggered antibacterial therapy platform. It offers a promising strategy for the treatment of burn infections.206

3.4 Other polysaccharide-based antibacterial hydrogels

3.4.1. Gelatin-based antibacterial hydrogels. Gelatin is a product derived from the hydrolysis of collagen.207 It is widely used in biomedical field because of its good biocompatibility, biodegradability and non-immunogenicity.208 In addition, the molecular structure of gelatin contains arginine-glycine-asparagine (RGD) sequence, which can promote cell adhesion, migration and proliferation, making gelatin an ideal tissue repair material.209 Han et al. prepared gelatin-based hydrogels, which had inherent self-healing ability, good cellular compatibility, adhesion, electrical conductivity and excellent hemostatic performance in vivo. It has potential application value in tissue adhesives, wound dressings and wearable devices.209

Moreover, gelatin-based hydrogels can speed up burn wound repair Burn wounds are generally accompanied by necrotic tissue, excessive reactive oxygen species and bacterial infection, which further deepens the wound and delays healing.210 Therefore, the design and development of a multifunctional hydrogel dressing that can both prevent and treat infection and respond to the microenvironment of wound tissues with high reactive oxygen species is an urgent need and challenge. Inspired by mussel chemistry, Han et al. constructed an adhesive hydrogel wound dressing with electrical conductivity, antioxidant activity, and photothermal antibacterial activity.208 The hydrogel showed suitable and adjustable swelling, degradation and rheological properties. In addition, hydrogels had good cytocompatibility and the ability of scavenging intracellular reactive oxygen species. Finally, in vivo data from rat burn models also suggested that hydrogel could accelerate burn wound healing.

3.4.2. HA-based antibacterial hydrogels. Hyaluronic acid (HA), is a linear polysaccharide consisting of alternating units of a repeating disaccharide, β-1, 4-D-glucuronic acid-β-1, 3-N-acetyl-D-glucosamine, found throughout the body (from the vitreous of the eye to the ECM of cartilage tissues).211 HA can prevent the proliferation of bacteria, and has antiinflammatory effects, and promotes wound healing.212

At present, HA-based injectable hydrogels are mainly constructed by doping antibacterial active molecules (such as chlorhexidine, antimicrobial peptides, antibiotics, metal ions, etc.).213–215 For example, in 2019, Dong et al. prepared a series of adhesive hemostatic antioxidant conductive photothermal antibacterial hydrogels based on HA grafted dopamine and reduced graphene oxide (rGO) for wound dressings using H2O2/HPR (horseradish peroxidase) systems.216 These hydrogels exhibit high swelling, degradability, adjustable rheological property, and similar or superior mechanical properties to human skin. Moreover, the polydopamine endowed hydrogels with antioxidant activity, conductivity, and NIR irradiation enhanced in vivo antibacterial behavior. Furthermore, the hydrogel dressings significantly enhanced vascularization by upregulating growth factor expression of CD31 and improved the granulation tissue thickness and collagen deposition.

3.5 Application of polysaccharide-based hydrogels in clinical

Burn wounds are susceptible to infection by pathogenic bacteria (such as E. coli, S. aureus, P. aeruginosa, S. epidermidis and fungal communities), thus prolonging wound healing time. The control of bacterial infection has always been the focus of the wound dressing and tissue repair process to reduce the likelihood of wound infection. Nano silver, antibiotics, antimicrobial peptides, etc. have been routinely used in clinical/preclinical bacterial infections. For example, Oryan et al. topical application of chitosan-capped silver nanoparticles (Ch/AgNPs) to treat burns.217 Ch/AgNPs significantly hasten the healing process by reducing the inflammatory cells, increasing proliferation, migrations, and proliferation of fibroblasts and promoting granulation tissue maturation.217 In conclusion, polysaccharide-based hydrogels are the most common clinical/preclinical strategy for reducing the incidence of burn wound infection by controlling bacterial infection.

At present, a variety of commercial wound dressings have been developed, ranging from natural polymers to various other forms of synthetic polymers. The emergence of antibiotic resistance has forced researchers to seek novel polysaccharide hydrogel wound dressings with antimicrobial activity. Among them, natural polysaccharides represented by chitosan are famous for their excellent bactericidal and hemostatic properties. Based on the excellent properties of chitosan, a variety of wound dressings are already on the market, namely Axiostat®, Tegasorb® and KytoCel®.218 Of these, Axiostat® can control bleeding. Tegasorb® can treat a wide range of internal injuries. KytoCel® combines with wound exudate to form a clear gel that absorbs pathogens and is hemostatic.

However, there are still limitations in the development of polysaccharide hydrogels. It has low mechanical properties. Modify the structure of polysaccharides. Hydrogels usually need to be doped with silver (Ag+), iron (Fe3+), strontium (Sr2+), zinc (Zn2+) and other metallic ions. Toxicity needs to be further verified. Few injectable polysaccharide hydrogels are available for clinical transformation, especially in the field of regenerative medicine.

4. Conclusions

Burn is a complex injury, especially large area burns and elderly burns have a relatively high mortality rate.219 Burns with large wounds, irregular and severe hemorrhage are more likely to cause infections and slow healing than other injuries.220 Therefore, prevention and treatment of burn infection have become a critical link in healing.

Over the past few decades, some efforts have been made to improve the treatment of burn infections. In recent years, technological developments in nanomedicine have contributed to the search for new alternatives to overcome bacterial infections. Several types of nanoparticles, such as metal nanoparticles, nano-micelles, and polymer nanoparticles, have been proposed to enhance the antimicrobial activity of compounds. Hence, in this review, we focus on both organic and non-organic nanoparticles, including metal/metal oxides nanoparticles (AgNPs, AuNPs, CuNPs, ZnO, and TiO2) and polymeric nanoparticles (chitosan and polymer micelles), all of which could be possibly utilized as potential antimicrobial agents in burns. We believe that the development of simple, low-cost nanoparticles antimicrobials may be the future direction of pharmaceutics and medicine.

In recent years, multifunctional biocompatible hydrogel scaffolds have been developed rapidly, such as wound dressings and films, stimulation-responsive hydrogels and hydrogels for delivering bioactive substances. Up to now, hydrogels for the treatment of burns include the following aspects: designing hydrogels with good biocompatibility and biodegradability, intelligent hydrogel systems (light response, pH-response and temperature response) were designed based on synthesis techniques (such as photo-crosslinking and dynamic physical chemistry crosslinking) to achieve controlled release of antibacterial materials. To investigate the affinity of hydrogel materials to damaged tissues, such as cell adhesion, migration and proliferation in hydrogel.

There are still many problems to be solved in the future research. Firstly, the lack of clinical animal models. At present, most experimental animal models are healthy young animals, and there is little discussion on some old animals or animal models with diseases. In addition, hydrogels are easily damaged during transportation and storage, which will eventually lead to drug leakage and affect their structure and function. Furthermore, the degradation rate of hydrogels should match the regeneration speed of the wound. Finally, appropriate hydrogels should be given for different tissue wounds. Therefore, an inexpensive, easy to manufacture, preserve, and suitable for all types of people should be developed in the future to provide a promising future for the treatment of burn infection.

Abbreviations

PDGFPlatelet-derived growth factor
EGFEpidermal growth factor
TGF-βTransforming growth factor-β
TNF-αTumor necrosis factor
IL-1Interleukin-1
IL-6Interleukin-1
IL-8Interleukin-8
VEGFVascular endothelial growth factor
FGFFibroblast growth factor
IGF-1Insulin-like growth factor
NGFNerve growth factor
KGFKeratinocyte growth factor
bFGFBasic fibroblast growth factor
ECMExtracellular matrix
GM-CSFGranulocyte-macrophage colony stimulating factor
MMPsMatrix metalloproteinases
TIMPsTissue inhibitors of metalloproteinases
MDRMultidrug-resistant
7-ADCA7-Aminodesacetoxycephalosporanic acid
APA6-Aminopenicillanic acid
ROSReactive oxygen species
GDYGraphdiyne
BCBacterial cellulose
TCTetracycline
CCCitric modified chitosan
MCMinocycline
PVAPolyvinyl alcohol
HNTHalloysite nanotubes
SFSilk fibroin
FAFusidic acid
AMPsAntimicrobial peptides
LTFLactotransferrin
HPCHydroxypropyl cellulose
MRSAMethicillin-resistant Staphylococcus aureus
AgSDSilver sulfadiazine
TCTSTemperature-sensitive chitosan
DDDeacetylation
OHA-ATOxidized hyaluronic acid-graft-aniline tetramer
CEC N-Carboxyethyl chitosan
ZOIZone of inhibition
ODOxidized dextran
CPChitosan-graft-polyaniline
QCSG/GM/GOQuaternized chitosan/gelatin methacrylate/graphene oxide hydrogels

Author contributions

Que Bai: funding acquisition, methodology, and writing – original draft. Caiyun Zheng: resources, conceptualization, and validation. Wenting Chen: investigation and data curation. Na Sun: project administration and validation. Qian Gao: formal analysis and software. Jinxi Liu: data curation, methodology, and visualization. Fangfang Hu: validation and project administration. SaHu Pimpi: data curation and formal analysis. Xintao Yan: data curation and methodology. Yanni Zhang: supervision and funding acquisition. Tingli Lu: conceptualization, funding acquisition, writing – review & editing.

Conflicts of interest

The authors declare no conflict of interest.

Acknowledgements

We acknowledge funding support by the joint funding from Department of Science and Technology of Shaanxi Province and Northwestern Polytechnical University (No. 2020GXLH-Z-021) and the innovation foundation for doctor dissertation of Northwestern Polytechnical University (No. CX2021099).

References

  1. R. Norton and O. Kobusingye, N. Engl. J. Med., 2013, 368, 1723–1730 CrossRef CAS PubMed.
  2. D. G. Greenhalgh, N. Engl. J. Med., 2019, 380, 2349–2359 CrossRef PubMed.
  3. M. A. Mofazzal Jahromi, P. Sahandi Zangabad, S. M. Moosavi Basri, K. Sahandi Zangabad, A. Ghamarypour, A. R. Aref, M. Karimi and M. R. Hamblin, Adv. Drug Delivery Rev., 2018, 123, 33–64 CrossRef CAS PubMed.
  4. M. G. Jeschke, M. E. van Baar, M. A. Choudhry, K. K. Chung, N. S. Gibran and S. Logsetty, Nat. Rev. Dis. Primers., 2020, 6, 11 CrossRef PubMed.
  5. S. Hettiaratchy and P. Dziewulski, BMJ, 2004, 328, 1427–1429 CrossRef PubMed.
  6. H. K. Akelma and Z. A. Karahan, Rare chemical burns: Review of the literature, Int Wound J., 2019, 16, 1330–1338 CrossRef PubMed.
  7. S. A. Wells, Curr. Probl. Surg., 1997, 34, 681 Search PubMed.
  8. M. Madaghiele, C. Demitri, A. Sannino and L. Ambrosio, Polymeric hydrogels for burn wound care: Advanced skin wound dressings and regenerative templates, Burns Trauma, 2014, 2(4), 2321–3868 Search PubMed.
  9. M. P. Rowan, L. C. Cancio, E. A. Elster, D. M. Burmeister, L. F. Rose, S. Natesan, R. K. Chan, R. J. Christy and K. K. Chung, Crit. Care, 2015, 19, 12 CrossRef PubMed.
  10. L. Li and M. Xiao, Role of Autophagy in Burn Wound Progression and Wound Healing, 2016.
  11. L. Rittie, J. Cell Commun. Signaling, 2016, 10, 103–120 CrossRef PubMed.
  12. S. W. Geoffrey, C. Gurtner, Y. Barrandon and M. T. Longaker, Wound repair and regeneration, Nature, 2008, 453, 314–321 CrossRef PubMed.
  13. N. Strbo, N. Yin and O. Stojadinovic, Adv. Wound Care, 2014, 3, 492–501 CrossRef PubMed.
  14. J. Li, J. Chen and R. Kirsner, Clin. Dermatol, 2007, 25, 9–18 CrossRef PubMed.
  15. I. Pastar, O. Stojadinovic, N. C. Yin, H. Ramirez, A. G. Nusbaum, A. Sawaya, S. B. Patel, L. Khalid, R. R. Isseroff and M. Tomic-Canic, Adv. Wound Care, 2014, 3, 445–464 CrossRef PubMed.
  16. P. Martin and D. B. Gurevich, Semin. Cell Dev. Biol., 2021, 119, 101–110 CrossRef CAS PubMed.
  17. T. S. Leyane, S. W. Jere and N. N. Houreld, Int. J. Mol. Sci., 2021, 22 Search PubMed.
  18. T. N. Demidova-Rice, M. R. Hamblin and I. M. Herman, Adv. Skin Wound Care, 2012, 25, 349–370 CrossRef PubMed.
  19. B. Hinz, J. Invest. Dermatol., 2007, 127, 526–537 CrossRef CAS PubMed.
  20. Y. K. Coban, World J. Crit. Care Med., 2012, 1, 94–101 CrossRef PubMed.
  21. W. Norbury, D. N. Herndon, J. Tanksley, M. G. Jeschke, C. C. Finnerty and I Sci Study Comm Surgical, Surg. Infect., 2016, 17, 250–255 CrossRef PubMed.
  22. J. W. Shupp, A. R. Pavlovich, J. C. Jeng, J. C. Pezzullo, W. J. Oetgen, A. D. Jaskille, M. H. Jordan and S. Shoham, J. Burn Care Res., 2010, 31, 521–528 CrossRef PubMed.
  23. R. Cartotto, Int. J. Burns Trauma, 2017, 5, 33 Search PubMed.
  24. M. Sevgi, A. Toklu, D. Vecchio and M. R. Hamblin, Recent Pat. Anti-Infect. Drug Discovery, 2013, 8, 161–197 CrossRef CAS PubMed.
  25. J. Qu, X. Zhao, Y. P. Liang, T. L. Zhang, P. X. Ma and B. L. Guo, Biomaterials, 2018, 183, 185–199 CrossRef CAS PubMed.
  26. S. Q. Li, S. J. Dong, W. G. Xu, S. C. Tu, L. S. Yan, C. W. Zhao, J. X. Ding and X. S. Chen, Adv. Sci., 2018, 5, 17 CrossRef PubMed.
  27. T. R. Kyriakides, A. Raj, T. H. Tseng, H. Xiao, R. Nguyen, F. S. Mohammed, S. Halder, M. Q. Xu, M. J. Wu, S. Z. Bao and W. C. Sheu, Biomed. Mater., 2021, 16, 26 Search PubMed.
  28. Y. H. Zheng, Y. L. Cheng, J. J. Chen, J. X. Ding, M. Q. Li, C. Li, J. C. Wang and X. S. Chen, ACS Appl. Mater. Interfaces, 2017, 9, 3487–3496 CrossRef CAS PubMed.
  29. L. Y. Wei, J. J. Chen, S. H. Zhao, J. X. Ding and X. S. Chen, Acta Biomater., 2017, 58, 44–53 CrossRef CAS PubMed.
  30. S. Koutsopoulos, Adv. Drug Delivery Rev., 2012, 64, 1459–1476 CrossRef CAS PubMed.
  31. M. Moritz and M. Geszke-Moritz, Chem. Eng. J., 2013, 228, 596–613 CrossRef CAS.
  32. M. Rai, A. Yadav and A. Gade, Biotechnol. Adv., 2009, 27, 76–83 CrossRef CAS PubMed.
  33. A. Heyneman, H. Hoeksema, D. Vandekerckhove, A. Pirayesh and S. Monstrey, Burns, 2016, 42, 1377–1386 CrossRef CAS PubMed.
  34. M. Miraftab, R. Masood and V. Edward-Jones, Carbohydr. Polym., 2014, 101, 1184–1190 CrossRef CAS PubMed.
  35. Z. J. Fan, B. Liu, J. Q. Wang, S. Y. Zhang, Q. Q. Lin, P. W. Gong, L. M. Ma and S. R. Yang, Adv. Funct. Mater., 2014, 24, 3933–3943 CrossRef CAS.
  36. J. S. Mohler, W. Sim, M. A. T. Blaskovich, M. A. Cooper and Z. M. Ziora, Biotechnol. Adv., 2018, 36, 1391–1411 CrossRef PubMed.
  37. A. C. Burdusel, O. Gherasim, A. M. Grumezescu, L. Mogoanta, A. Ficai and E. Andronescu, Nanomaterials, 2018, 8, 25 CrossRef PubMed.
  38. C. Y. Chen, H. Yin, X. Chen, T. H. Chen, H. M. Liu, S. S. Rao, Y. J. Tan, Y. X. Qian, Y. W. Liu, X. K. Hu, M. J. Luo, Z. X. Wang, Z. Z. Liu, J. Cao, Z. H. He, B. Wu, T. Yue, Y. Y. Wang, K. Xia, Z. W. Luo, Y. Wang, W. Y. Situ, W. E. Liu, S. Y. Tang and H. Xie, Sci. Adv., 2020, 6, 14 Search PubMed.
  39. V. Gopinath, S. Priyadarshini, M. F. Loke, J. Arunkumar, E. Marsili, D. MubarakAli, P. Velusamy and J. Vadivelu, Arabian J. Chem., 2017, 10, 1107–1117 CrossRef CAS.
  40. S. Batool, Z. Hussain, M. B. K. Niazi, U. Liaqat and M. Afzal, J. Drug Delivery Sci. Technol., 2019, 52, 403–414 CrossRef CAS.
  41. M. Yadollahi, H. Namazi and M. Aghazadeh, Int. J. Biol. Macromol., 2015, 79, 269–277 CrossRef CAS PubMed.
  42. M. H. Kim, H. Park, H. C. Nam, S. R. Park, J. Y. Jung and W. H. Park, Carbohydr. Polym., 2018, 181, 579–586 CrossRef CAS PubMed.
  43. Y. Z. Zhou, R. Chen, T. T. He, K. Xu, D. Du, N. Zhao, X. N. Cheng, J. Yang, H. F. Shi and Y. H. Lin, ACS Appl. Mater. Interfaces, 2016, 8, 15067–15075 CrossRef CAS PubMed.
  44. S. Jiji, S. Udhayakumar, K. Maharajan, C. Rose, C. Muralidharan and K. Kadirvelu, Carbohydr. Polym., 2020, 245, 11 CrossRef PubMed.
  45. C. Kalirajan and T. Palanisamy, Adv. Healthcare Mater., 2020, 9, 15 Search PubMed.
  46. L. J. V. Piddock, Nat. Rev. Microbiol., 2017, 15, 639–640 CrossRef CAS PubMed.
  47. A. Panacek, L. Kvitek, M. Smekalova, R. Vecerova, M. Kolar, M. Roderova, F. Dycka, M. Sebela, R. Prucek, O. Tomanec and R. Zboril, Nat. Nanotechnol., 2018, 13, 65–71 CrossRef CAS PubMed.
  48. L. D. Kong, C. S. Alves, W. X. Hou, J. R. Qiu, H. Mohwald, H. Tomas and X. Y. Shi, ACS Appl. Mater. Interfaces, 2015, 7, 4833–4843 CrossRef CAS PubMed.
  49. S. Wang, C. Yan, X. M. Zhang, D. Z. Shi, L. X. Chi, G. X. Luo and J. Deng, Biomater. Sci., 2018, 6, 2757–2772 RSC.
  50. P. C. L. Silveira, M. Venancio, P. S. Souza, E. G. Victor, F. d S. Notoya, C. S. Paganini, E. L. Streck, L. da Silva, R. A. Pinho and M. M. S. Paula, Mater. Sci. Eng., C, 2014, 44, 380–385 CrossRef CAS PubMed.
  51. S. C. Wei, L. Chang, C. C. Huang and H. T. Chang, Biomater. Sci., 2019, 7, 4482–4490 RSC.
  52. Y. Cui, Y. Y. Zhao, Y. Tian, W. Zhang, X. Y. Lu and X. Y. Jiang, Biomaterials, 2012, 33, 2327–2333 CrossRef CAS PubMed.
  53. X. L. Yang, J. C. Yang, L. Wang, B. Ran, Y. X. Jia, L. M. Zhang, G. Yang, H. W. Shao and X. Y. Jiang, ACS Nano, 2017, 11, 5737–5745 CrossRef CAS PubMed.
  54. Y. Qiao, J. He, W. Y. Chen, Y. H. Yu, W. L. Li, Z. Du, T. T. Xie, Y. Ye, S. Y. Hua, D. N. Zhong, K. Yao and M. Zhou, ACS Nano, 2020, 14, 3299–3315 CrossRef CAS PubMed.
  55. N. Jones, B. Ray, K. T. Ranjit and A. C. Manna, FEMS Microbiol. Lett., 2008, 279, 71–76 CrossRef CAS PubMed.
  56. Q. Shi, X. Luo, Z. Huang, A. C. Midgley, B. Wang, R. Liu, D. Zhi, T. Wei, X. Zhou, M. Qiao, J. Zhang, D. Kong and K. Wang, Acta Biomater., 2019, 86, 465–479 CrossRef CAS PubMed.
  57. L. Kong, Z. Wu, H. Zhao, H. Cui, J. Shen, J. Chang, H. Li and Y. He, ACS Appl. Mater. Interfaces, 2018, 10, 30103–30114 CrossRef CAS PubMed.
  58. A. Nasajpour, S. Ansari, C. Rinoldi, A. S. Rad, T. Aghaloo, S. R. Shin, Y. K. Mishra, R. Adelung, W. Swieszkowski, N. Annabi, A. Khademhosseini, A. Moshaverinia and A. Tamayol, Adv. Funct. Mater., 2018, 28, 8 Search PubMed.
  59. Y. Yang, L. Ma, C. Cheng, Y. Y. Deng, J. B. Huang, X. Fan, C. X. Nie, W. F. Zhao and C. D. Zhao, Adv. Funct. Mater., 2018, 28, 12 Search PubMed.
  60. J. B. You, L. Meng, T. B. Song, T. F. Guo, Y. Yang, W. H. Chang, Z. R. Hong, H. J. Chen, H. P. Zhou, Q. Chen, Y. S. Liu, N. De Marco and Y. Yang, Nat. Nanotechnol., 2016, 11, 75–81 CrossRef CAS PubMed.
  61. M. J. Choi, S. Kim, H. Lim, J. Choi, D. M. Sim, S. Yim, B. T. Ahn, J. Y. Kim and Y. S. Jung, Adv. Mater., 2016, 28, 1780–1787 CrossRef CAS PubMed.
  62. S. Noimark, J. Weiner, N. Noor, E. Allan, C. K. Williams, M. S. P. Shaffer and I. P. Parkin, Adv. Funct. Mater., 2015, 25, 1367–1373 CrossRef CAS.
  63. Y. Li, W. Zhang, J. F. Niu and Y. S. Chen, ACS Nano, 2012, 6, 5164–5173 CrossRef CAS PubMed.
  64. Z. Hadisi, M. Farokhi, H. R. Bakhsheshi-Rad, M. Jahanshahi, S. Hasanpour, E. Pagan, A. Dolatshahi-Pirouz, Y. S. Zhang, S. C. Kundu and M. Akbari, Macromol. Biosci., 2020, 20, 17 CrossRef PubMed.
  65. W. J. Miao, H. J. Kim, V. Gujrati, J. Y. Kim, H. Jon, Y. Lee, M. Choi, J. Kim, S. Lee, D. Y. Lee, S. Kang and S. Jon, Theranostics, 2016, 6, 2367–2379 CrossRef CAS PubMed.
  66. Y. T. Kang, X. Y. Tang, Z. G. Cai and X. Zhang, Adv. Funct. Mater., 2016, 26, 8920–8931 CrossRef CAS.
  67. F. L. Gao, M. Z. Sun, W. Ma, X. L. Wu, L. Q. Liu, H. Kuang and C. L. Xu, Adv. Mater., 2017, 29, 8 Search PubMed.
  68. N. Ninan, A. Forget, V. P. Shastri, N. H. Voelcker and A. Blencowe, ACS Appl. Mater. Interfaces, 2016, 8, 28511–28521 CrossRef CAS PubMed.
  69. S. H. Bhang, W. S. Jang, J. Han, J. K. Yoon, W. G. La, E. Lee, Y. S. Kim, J. Y. Shin, T. J. Lee, H. K. Baik and B. S. Kim, Adv. Funct. Mater., 2017, 27, 13 CrossRef.
  70. C. Y. Mao, Y. M. Xiang, X. M. Liu, Z. D. Cui, X. J. Yang, K. W. K. Yeung, H. B. Pan, X. B. Wang, P. K. Chu and S. L. Wu, ACS Nano, 2017, 11, 9010–9021 CrossRef CAS PubMed.
  71. P. Wang, L. Jiang and R. X. Han, Mater. Res. Express, 2020, 7, 9 Search PubMed.
  72. A. V. Thanusha, A. K. Dinda and V. Koul, Mater. Sci. Eng., C, 2018, 89, 378–386 CrossRef CAS PubMed.
  73. D. D. Li, Q. Q. Guo, L. M. Ding, W. Zhang, L. Cheng, Y. Q. Wang, Z. B. Xu, H. H. Wang and L. Z. Gao, ChemBioChem, 2020, 21, 2620–2627 CrossRef CAS PubMed.
  74. K. S. Brammer, C. J. Frandsen and S. Jin, Trends Biotechnol., 2012, 30, 315–322 CrossRef CAS PubMed.
  75. J. Liu, L. J. Ye, Y. L. Sun, M. H. Hu, F. Chen, S. Wegner, V. Mailander, W. Steffen, M. Kappl and H. J. Butt, Adv. Mater., 2020, 32, 8 Search PubMed.
  76. N. A. Ismail, K. A. M. Amin, F. A. A. Majid and M. H. Razali, Mater. Sci. Eng., C, 2019, 103, 9 CrossRef PubMed.
  77. R. Wang, M. S. Shi, F. Y. Xu, Y. Qiu, P. Zhang, K. L. Shen, Q. Zhao, J. G. Yu and Y. F. Zhang, Nat. Commun., 2020, 11, 12 CrossRef PubMed.
  78. M. Li, Z. Ma, Y. Zhu, H. Xia, M. Y. Yao, X. Chu, X. L. Wang, K. Yang, M. Y. Yang, Y. Zhang and C. B. Mao, Adv. Healthcare Mater., 2016, 5, 557–566 CrossRef CAS PubMed.
  79. Z. J. Jia, P. Xiu, M. Li, X. C. Xu, Y. Y. Shi, Y. Cheng, S. C. Wei, Y. F. Zheng, T. F. Xi, H. Cai and Z. J. Liu, Biomaterials, 2016, 75, 203–222 CrossRef CAS PubMed.
  80. A. Khalid, H. Ullah, M. Ul-Islam, R. Khan, S. Khan, F. Ahmad, T. Khan and F. Wahid, RSC Adv., 2017, 7, 47662–47668 RSC.
  81. G. A. Seisenbaeva, K. Fromell, V. V. Vinogradov, A. N. Terekhov, A. V. Pakhomov, B. Nilsson, K. N. Ekdahl, V. V. Vinogradov and V. G. Kessler, Sci. Rep., 2017, 7, 11 CrossRef PubMed.
  82. S. Khan, M. Ul-Islam, W. A. Khattak, M. W. Ullah and J. K. Park, Cellulose, 2015, 22, 565–579 CrossRef CAS.
  83. C. C. Zhang, Y. D. Li, Y. J. Hu, Y. Peng, Z. Ahmad, J. S. Li and M. W. Chang, ACS Appl. Mater. Interfaces, 2019, 11, 7823–7835 CrossRef CAS PubMed.
  84. X. Y. Li, Q. J. He and J. L. Shi, ACS Nano, 2014, 8, 1309–1320 CrossRef CAS PubMed.
  85. S. B. Hartono, W. Y. Gu, F. Kleitz, J. Liu, L. Z. He, A. P. J. Middelberg, C. Z. Yu, G. Q. Lu and S. Z. Qiao, ACS Nano, 2012, 6, 2104–2117 CrossRef CAS PubMed.
  86. S. Quignard, T. Coradin, J. J. Powell and R. Jugdaohsingh, Colloids Surf., B, 2017, 155, 530–537 CrossRef CAS PubMed.
  87. M. Mehrasa, M. A. Asadollahi, B. Nasri-Nasrabadi, K. Ghaedi, H. Salehi, A. Dolatshahi-Pirouz and A. Arpanaei, Mater. Sci. Eng., C, 2016, 66, 25–32 CrossRef CAS PubMed.
  88. C. Kalirajan and T. Palanisamy, Biomater. Sci., 2020, 8, 1622–1637 RSC.
  89. P. Appelgren, V. Bjornhagen, K. Bragderyd, C. E. Jonsson and U. Ransjo, Burns, 2002, 28, 39–46 CrossRef PubMed.
  90. A. Saito, H. Miyazaki, T. Fujie, S. Ohtsubo, M. Kinoshita, D. Saitoh and S. Takeoka, Acta Biomater., 2012, 8, 2932–2940 CrossRef CAS PubMed.
  91. J. M. Chen, Z. G. Liu, M. H. Chen, H. Zhang and X. H. Li, Macromol. Biosci., 2016, 16, 1368–1380 CrossRef CAS PubMed.
  92. S. Kalita, B. Devi, R. Kandimalla, K. K. Sharma, A. Sharma, K. Kalita, A. C. Kataki and J. Kotoky, Int. J. Nanomed., 2015, 10, 2971–2984 CAS.
  93. S. Kalita, R. Kandimalla, B. Devi, B. Kalita, K. Kalita, M. Deka, A. C. Kataki, A. Sharma and J. Kotoky, RSC Adv., 2017, 7, 1749–1758 RSC.
  94. A. Shah, M. A. Buabeid, E. S. A. Arafa, I. Hussain, L. H. Li and G. Murtaza, Int. J. Pharm., 2019, 564, 22–38 CrossRef CAS PubMed.
  95. A. C. Alavarse, F. W. D. Silva, J. T. Colque, V. M. da Silva, T. Prieto, E. C. Venancio and J. J. Bonvent, Mater. Sci. Eng., C, 2017, 77, 271–281 CrossRef CAS PubMed.
  96. T. Fujie, A. Saito, M. Kinoshita, H. Miyazaki, S. Ohtsubo, D. Saitoh and S. Takeoka, Biomaterials, 2010, 31, 6269–6278 CrossRef CAS PubMed.
  97. H. Chen, B. Y. Li, B. Feng, H. Wang, H. H. Yuan and Z. W. Xu, RSC Adv., 2019, 9, 19523–19530 RSC.
  98. N. Garrido-Mesa, A. Zarzuelo and J. Galvez, Br. J. Pharmacol., 2013, 169, 337–352 CrossRef CAS PubMed.
  99. S. Chopra, K. Harjai and S. Chhibber, Int. J. Med. Microbiol., 2016, 306, 707–716 CrossRef CAS PubMed.
  100. K. Guney, S. Tatar, B. Ozel, C. Seymen, C. Elmas, S. Tuncer and S. Cenetoglu, Facial Plast. Surg., 2019, 35, 96–102 CrossRef CAS PubMed.
  101. A. Mohebali, M. Abdouss and F. A. Taromi, Mater. Sci. Eng., C, 2020, 110, 10 CrossRef PubMed.
  102. S. K. Bajpai, V. Pathak and B. Soni, Int. J. Biol. Macromol., 2015, 79, 76–85 CrossRef CAS PubMed.
  103. A. Mohebali and M. Abdouss, Int. J. Biol. Macromol., 2020, 164, 4193–4204 CrossRef CAS PubMed.
  104. P. Kaur, V. S. Gondil and S. Chhibber, Int. J. Pharm., 2019, 572, 13 CrossRef PubMed.
  105. H. Asgarirad, P. Ebrahimnejad, M. A. Mahjoub, M. Jalalian, H. Morad, R. Ataee, S. S. Hosseini and A. Farmoudeh, J. Microencapsulation, 2021, 38, 100–107 CrossRef CAS PubMed.
  106. Y. Lan, W. C. Li, R. Guo, Y. Zhang, W. Xue and Y. M. Zhang, J. Biomater. Sci., Polym. Ed., 2014, 25, 75–87 CrossRef CAS PubMed.
  107. Y. Lan, W. C. Li, Y. P. Jiao, R. Guo, Y. Zhang, W. Xue and Y. M. Zhang, Acta Biomater., 2014, 10, 3167–3176 CrossRef CAS PubMed.
  108. M. Zilberman, D. Egozi, M. Shemesh, A. Keren, E. Mazor, M. Baranes-Zeevi, N. Goldstein, I. Berdicevsky, A. Gilhar and Y. Ullmann, Acta Biomater., 2015, 22, 155–163 CrossRef CAS PubMed.
  109. A. Gonzalez-Ruiz, R. A. Seaton and K. Hamed, Infect. Drug Resist., 2016, 9, 47–58 CAS.
  110. L. Robbel and M. A. Marahiel, J. Biol. Chem., 2010, 285, 27501–27508 CrossRef CAS PubMed.
  111. O. Simonetti, G. Lucarini, F. Orlando, E. Pierpaoli, R. Ghiselli, M. Provinciali, P. Castelli, M. Guerrieri, R. Di Primio, A. Offidani, A. Giacometti and O. Cirioni, Antimicrob. Agents Chemother., 2017, 61, 11 CrossRef PubMed.
  112. S. Wadhwa, B. Singh, G. Sharma, K. Raza and O. P. Katare, Drug Delivery, 2016, 23, 1204–1213 CrossRef CAS PubMed.
  113. K. Thakur, G. Sharma, B. Singh, S. Chhibber and O. P. Katare, Drug Delivery Transl. Res., 2019, 9, 748–763 CrossRef CAS PubMed.
  114. B. H. Hu, C. Owh, P. L. Chee, W. R. Leow, X. Liu, Y. L. Wu, P. Z. Guo, X. J. Loh and X. D. Chen, Chem. Soc. Rev., 2018, 47, 14 Search PubMed.
  115. E. R. Angert, Nat. Rev. Microbiol., 2005, 3, 214–224 CrossRef CAS PubMed.
  116. C. A. Michael, D. Dominey-Howes and M. Labbate, Front. Public Health, 2014, 2, 145 Search PubMed.
  117. M. Xiong, M. Chen and J. Zhang, Chem. Biol. Drug Des., 2016, 88, 404–410 CrossRef CAS PubMed.
  118. M. L. Mangoni, A. M. McDermott and M. Zasloff, Exp. Dermatol., 2016, 25, 167–173 CrossRef CAS PubMed.
  119. L. Otvos, Jr., Acta Microbiol. Immunol. Hung., 2016, 63, 257–277 CrossRef PubMed.
  120. N. Raheem and S. K. Straus, Front. Microbiol., 2019, 10, 14 CrossRef PubMed.
  121. G. Zhong, J. Cheng, Z. C. Liang, L. Xu, W. Lou, C. Bao, Z. Y. Ong, H. Dong, Y. Y. Yang and W. Fan, Adv. Healthcare Mater., 2017, 6 Search PubMed.
  122. C. Bjorn, L. Noppa, E. N. Salomonsson, A.-L. Johansson, E. Nilsson, M. Mahlapuu and J. Hakansson, Int. J. Antimicrob. Agents, 2015, 45, 519–524 CrossRef PubMed.
  123. J. V. Carratala, N. Serna, A. Villaverde, E. Vazquez and N. Ferrer-Miralles, Biotechnol. Adv., 2020, 44, 13 CrossRef PubMed.
  124. P. Pomastowski, M. Sprynskyy, P. Zuvela, K. Rafinska, M. Milanowski, J. J. Liu, M. G. Yi and B. Buszewski, J. Am. Chem. Soc., 2016, 138, 7899–7909 CrossRef CAS PubMed.
  125. C. Ghosh, G. B. Manjunath, M. M. Konai, D. S. S. M. Uppu, K. Paramanandham, B. R. Shome, R. Ravikumar and J. Haldar, ACS Infect. Dis., 2016, 2, 111–122 CrossRef CAS PubMed.
  126. M. Pan, C. Lu, M. C. Zheng, W. Zhou, F. L. Song, W. D. Chen, F. Yao, D. J. Liu and J. F. Cai, Adv. Healthcare Mater., 2020, 9, 12 Search PubMed.
  127. Z. Ozkurt, M. Ertek, S. Erol, U. Altoparlak and M. N. Akcay, Burns, 2005, 31, 870–873 CrossRef PubMed.
  128. E. E. Tredget, H. A. Shankowsky, R. Rennie, R. E. Burrell and S. Logsetty, Burns, 2004, 30, 3–26 CrossRef PubMed.
  129. E. Myhrman, J. Hakansson, K. Lindgren, C. Bjorn, V. Sjostrand and M. Mahlapuu, Appl. Microbiol. Biotechnol., 2013, 97, 3085–3096 CrossRef CAS PubMed.
  130. J. Hakansson, C. Bjorn, K. Lindgren, E. Sjostrom, V. Sjostrand and M. Mahlapuua, Antimicrob. Agents Chemother., 2014, 58, 2982–2984 CrossRef PubMed.
  131. S. Y. C. Tong, J. S. Davis, E. Eichenberger, T. L. Holland and V. G. Fowler, Clin. Microbiol. Rev., 2015, 28, 603–661 CrossRef CAS PubMed.
  132. S. Lakhundi and K. Y. Zhang, Clin. Microbiol. Rev., 2018, 31, 103 CrossRef PubMed.
  133. E. M. Haisma, A. de Breij, H. Chan, J. T. van Dissel, J. W. Drijfhout, P. S. Hiemstra, A. El Ghalbzouri and P. H. Nibbering, Antimicrob. Agents Chemother., 2014, 58, 4411–4419 CrossRef PubMed.
  134. Z. Ma, J. Han, B. Chang, L. Gao, Z. Lu, F. Lu, H. Zhao, C. Zhang and X. Bie, ACS Infect. Dis., 2017, 3, 820–832 CrossRef CAS PubMed.
  135. R. T. Rozenbaum, L. Z. Su, A. Umerska, M. Eveillard, J. Hakansson, M. Mahlapuu, F. Huang, J. F. Liu, Z. K. Zhang, L. Q. Shi, H. C. van der Mei, H. J. Busscher and P. K. Sharma, J. Controlled Release, 2019, 293, 73–83 CrossRef CAS PubMed.
  136. S. Obuobi, H. K. L. Tay, N. D. T. Tram, V. Selvarajan, J. S. Khara, Y. Wang and P. L. R. Ee, J. Controlled Release, 2019, 313, 120–130 CrossRef CAS PubMed.
  137. M. D. Seo, H. S. Won, J. H. Kim, T. Mishig-Ochir and B. J. Lee, Molecules, 2012, 17, 12276–12286 CrossRef CAS PubMed.
  138. A. L. Lakes, R. Peyyala, J. L. Ebersole, D. A. Puleo, J. Z. Hilt and T. D. Dziubla, Biomacromolecules, 2014, 15, 3009–3018 CrossRef CAS PubMed.
  139. J. Reinbold, A. K. Uhde, I. Muller, T. Weindl, J. Geis-Gerstorfer, C. Schlensak, H. P. Wendel and S. Krajewski, Molecules, 2017, 22, 15 CrossRef PubMed.
  140. R. T. C. Cleophas, J. Sjollema, H. J. Busscher, J. A. W. Kruijtzer and R. M. J. Liskamp, Biomacromolecules, 2014, 15, 3390–3395 CrossRef CAS PubMed.
  141. B. S. Atiyeh, M. Costagliola, S. N. Hayek and S. A. Dibo, Burns, 2007, 33, 139–148 CrossRef PubMed.
  142. K. Ito, A. Saito, T. Fujie, K. Nishiwaki, H. Miyazaki, M. Kinoshita, D. Saitoh, S. Ohtsubo and S. Takeoka, Acta Biomater., 2015, 24, 87–95 CrossRef CAS PubMed.
  143. P. M. Kumar and A. Ghosh, Eur. J. Pharm. Sci., 2017, 96, 243–254 CrossRef CAS PubMed.
  144. K. Thakur, A. Mahajan, G. Sharma, B. Singh, K. Raza, S. Chhibber and O. P. Katare, Int. J. Pharm., 2020, 576, 19 CrossRef PubMed.
  145. M. C. G. Pella, M. K. Lima-Tenorio, E. T. T. Neto, M. R. Guilherme, E. C. Muniz and A. F. Rubira, Carbohydr. Polym., 2018, 196, 233–245 CrossRef CAS PubMed.
  146. V. Dodane and V. D. Vilivalam, Pharm. Sci. Technol. Today, 1998, 1, 246–253 CrossRef CAS.
  147. C. Velasquillo, P. Silva-Bermudez, N. Vazquez, A. Martinez, A. Espadin, J. Garcia-Lopez, A. Medina-Vega, H. Lecona, R. Pichardo-Baena, C. Ibarra and K. Shirai, J. Biomed. Mater. Res., Part A, 2017, 105, 2875–2891 CrossRef CAS PubMed.
  148. A. P. Deng, Y. Yang, S. M. Du, X. X. Yang, S. C. Pang, X. J. Wang and S. L. Yang, Mater. Sci. Eng., C, 2021, 119, 13 CrossRef PubMed.
  149. J. A. S. Moreno, A. C. Mendes, K. Stephansen, C. Engwer, F. M. Goycoolea, A. Boisen, L. H. Nielsen and I. S. Chronakis, Carbohydr. Polym., 2018, 190, 240–247 CrossRef CAS PubMed.
  150. S. Rashki, K. Asgarpour, H. Tarrahimofrad, M. Hashemipour, M. S. Ebrahimi, H. Fathizadeh, A. Khorshidi, H. Khan, Z. Marzhoseyni, M. Salavati-Niasari and H. Mirzaei, Carbohydr. Polym., 2021, 251, 12 CrossRef PubMed.
  151. Z. A. Ahovan, S. Khosravimelal, B. S. Eftekhari, S. Mehrabi, A. Hashemi, S. Eftekhari, P. B. Milan, M. Mobaraki, A. M. Seifalian and M. Gholipourmalekabadi, Int. J. Biol. Macromol., 2020, 164, 4475–4486 CrossRef PubMed.
  152. G. Kravanja, M. Primozic, Z. Knez and M. Leitgeb, Molecules, 2019, 24, 23 CrossRef PubMed.
  153. F. L. Yan, Q. F. Dang, C. S. Liu, J. Q. Yan, T. Wang, B. Fan, D. S. Cha, X. L. Li, S. G. Liang and Z. Z. Zhang, Carbohydr. Polym., 2016, 149, 102–111 CrossRef CAS PubMed.
  154. X. F. Liu, Y. L. Guan, D. Z. Yang, Z. Li and K. De Yao, J. Appl. Polym. Sci., 2001, 79, 1324–1335 CrossRef CAS.
  155. J. H. Li, Y. G. Wu and L. Q. Zhao, Carbohydr. Polym., 2016, 148, 200–205 CrossRef CAS PubMed.
  156. S.-H. Eom, S.-K. Kang, D.-S. Lee, J.-I. Myeong, J. Lee, H.-W. Kim, K.-H. Kim, J.-Y. Je, W.-K. Jung and Y.-M. Kim, J. Microbiol. Biotechnol., 2016, 26, 784–789 CrossRef CAS PubMed.
  157. X. H. Wang, Y. M. Du, L. H. Fan, H. Liu and Y. Hu, Polym. Bull., 2005, 55, 105–113 CrossRef CAS.
  158. T. Chhibber, V. S. Gondil and V. R. Sinha, AAPS PharmSciTech, 2020, 21, 12 CrossRef PubMed.
  159. E. Luna-Hernandez, M. E. Cruz-Soto, F. Padilla-Vaca, R. A. Mauricio-Sanchez, D. Ramirez-Wong, R. Munoz, L. Granados-Lopez, L. R. Ovalle-Flores, J. L. Menchaca-Arredondo, A. Hernandez-Rangel, E. Prokhorov, J. L. Garcia-Rivas, B. L. Espana-Sanchez and G. Luna-Barcenas, Int. J. Biol. Macromol., 2017, 105, 1241–1249 CrossRef CAS PubMed.
  160. S. Abid, T. Hussain, A. Nazir, A. Zahir, S. Ramakrishna, M. Hameed and N. Khenoussi, Int. J. Biol. Macromol., 2019, 135, 1222–1236 CrossRef CAS PubMed.
  161. Y. Chen, H. Y. Qiu, M. H. Dong, B. Cheng, Y. G. Jin, Z. R. Tong, P. W. Li, S. D. Li and Z. M. Yang, Carbohydr. Polym., 2019, 206, 435–445 CrossRef CAS PubMed.
  162. K. Bankoti, A. P. Rameshbabu, S. Datta, P. Goswami, M. Roy, D. Das, S. K. Ghosh, A. K. Das, A. Mitra, S. Pal, D. Maulik, B. Su, P. Ghosh, B. Basu and S. Dhara, Biomacromolecules, 2021, 22, 514–533 CrossRef CAS PubMed.
  163. J. H. Diaz and F. A. Lopez, Am. J. Med. Sci., 2015, 349, 269–275 CrossRef PubMed.
  164. J. Dorazilova, J. Muchova, K. Smerkova, S. Kociova, P. Divis, P. Kopel, R. Vesely, V. Pavlinakova, V. Adam and L. Vojtova, Nanomaterials, 2020, 10, 21 CrossRef PubMed.
  165. Q. Q. Ouyang, Z. Hu, Z. P. Lin, W. Y. Quan, Y. F. Deng, S. D. Li, P. W. Li and Y. Chen, Int. J. Biol. Macromol., 2018, 112, 1191–1198 CrossRef CAS PubMed.
  166. I. Bano, M. Arshad, T. Yasin and M. A. Ghauri, Int. J. Biol. Macromol., 2019, 124, 155–162 CrossRef CAS PubMed.
  167. J. S. Lu, W. Y. Zhu, L. Dai, C. L. Si and Y. H. Ni, Carbohydr. Polym., 2019, 215, 289–295 CrossRef CAS PubMed.
  168. G. H. Yan, B. L. Chen, X. H. Zeng, Y. Sun, X. Tang and L. Lin, Carbohydr. Polym., 2020, 244, 15 CrossRef PubMed.
  169. Z. Wei, J. H. Yang, J. X. Zhou, F. Xu, M. Zrinyi, P. H. Dussault, Y. Osada and Y. M. Chen, Chem. Soc. Rev., 2014, 43, 8114–8131 RSC.
  170. S. Obuobi, Z. X. Voo, M. W. Low, B. Czarny, V. Selvarajan, N. L. Ibrahim, Y. Y. Yang and P. L. R. Ee, Adv. Healthcare Mater., 2018, 7, 8 Search PubMed.
  171. Y. Yao, X. D. Chi, Y. J. Zhou and F. H. Huang, Chem. Sci., 2014, 5, 2778–2782 RSC.
  172. C. Pitzler, G. Wirtz, L. Vojcic, S. Hiltl, A. Boker, R. Martinez and U. Schwaneberg, Chem. Biol., 2014, 21, 1733–1742 CrossRef CAS PubMed.
  173. J. G. Hardy, M. N. Amend, S. Geissler, V. M. Lynch and C. E. Schmidt, J. Mater. Chem. B, 2015, 3, 5005–5009 RSC.
  174. J. Qu, X. Zhao, Y. P. Liang, Y. M. Xu, P. X. Ma and B. L. Guo, Chem. Eng. J., 2019, 362, 548–560 CrossRef CAS.
  175. X. Zhao, R. N. Dong, B. L. Guo and P. X. Ma, ACS Appl. Mater. Interfaces, 2017, 9, 29595–29611 CrossRef CAS PubMed.
  176. X. Xue, Y. Hu, Y. H. Deng and J. C. Su, Adv. Funct. Mater., 2021, 31, 20 Search PubMed.
  177. B. L. Guo, J. Qu, X. Zhao and M. Y. Zhang, Acta Biomater., 2019, 84, 180–193 CrossRef CAS PubMed.
  178. I. S. Foulds and A. T. Barker, Br. J. Dermatol., 1983, 109, 515–522 CrossRef CAS PubMed.
  179. L. C. Kloth and J. M. McCulloch, Adv. Wound Care, 1996, 9, 42–45 CAS.
  180. Y. P. Liang, X. Zhao, T. L. Hu, Y. Han and B. L. Guo, J. Colloid Interface Sci., 2019, 556, 514–528 CrossRef CAS PubMed.
  181. I. Jun, S. Jeong and H. Shin, Biomaterials, 2009, 30, 2038–2047 CrossRef CAS PubMed.
  182. H. T. Cui, J. Shao, Y. Wang, P. B. Zhang, X. S. Chen and Y. Wei, Biomacromolecules, 2013, 14, 1904–1912 CrossRef CAS PubMed.
  183. N. C. Spitzer, Nature, 2006, 444, 707–712 CrossRef CAS PubMed.
  184. S. H. Ku, S. H. Lee and C. B. Park, Biomaterials, 2012, 33, 6098–6104 CrossRef CAS PubMed.
  185. B. L. Guo, L. Glavas and A. C. Albertsson, Prog. Polym. Sci., 2013, 38, 1263–1286 CrossRef CAS.
  186. B. Guo, A. Finne-Wistrand and A.-C. Albertsson, Macromolecules, 2012, 45, 652–659 CrossRef CAS.
  187. B. Guo, A. Finne-Wistrand and A. C. Albertsson, Chem. Mater., 2011, 23, 4045–4055 CrossRef CAS.
  188. L. C. Li, M. Yu, P. X. Ma and B. L. Guo, J. Mater. Chem. B, 2016, 4, 471–481 RSC.
  189. Y. B. Wu, L. Wang, B. L. Guo, Y. P. Shao and P. X. Ma, Biomaterials, 2016, 87, 18–31 CrossRef CAS PubMed.
  190. M. H. Xie, L. Wang, B. L. Guo, Z. Wang, Y. E. Chen and P. X. Ma, Biomaterials, 2015, 71, 158–167 CrossRef CAS PubMed.
  191. Z. X. Deng, Y. Guo, X. Zhao, L. C. Li, R. N. Dong, B. L. Guo and P. X. Ma, Acta Biomater., 2016, 46, 234–244 CrossRef CAS PubMed.
  192. M. Talikowska, X. X. Fu and G. Lisak, Biosens. Bioelectron., 2019, 135, 50–63 CrossRef CAS PubMed.
  193. M. Gizdavic-Nikolaidis, J. Travas-Sejdic, G. A. Bowmaker, R. P. Cooney and P. A. Kilmartin, Synth. Met., 2004, 140, 225–232 CrossRef CAS.
  194. N. Baheiraei, H. Yeganeh, J. Ai, R. Gharibi, M. Azami and F. Faghihi, Mater. Sci. Eng., C, 2014, 44, 24–37 CrossRef CAS PubMed.
  195. J. Qu, X. Zhao, P. X. Ma and B. L. Guo, Acta Biomater., 2018, 72, 55–69 CrossRef CAS PubMed.
  196. Z. Kucekova, V. Kasparkova, P. Humpolicek, P. Sevcikova and J. Stejskal, Chem. Pap., 2013, 67, 1103–1108 CAS.
  197. R. N. Dong, X. Zhao, B. L. Guo and P. X. Ma, ACS Appl. Mater. Interfaces, 2016, 8, 17138–17150 CrossRef CAS PubMed.
  198. Y. P. Liang, B. J. Chen, M. Li, J. H. He, Z. H. Yin and B. L. Guo, Biomacromolecules, 2020, 21, 1841–1852 CrossRef CAS PubMed.
  199. X. M. Dai, Y. Zhao, Y. J. Yu, X. L. Chen, X. S. Wei, X. G. Zhang and C. X. Li, ACS Appl. Mater. Interfaces, 2017, 9, 30470–30479 CrossRef CAS PubMed.
  200. S. J. Park, E. B. Kang, S. M. Sharker, G. Lee, I. In and S. Y. Park, Macromol. Mater. Eng., 2016, 301, 141–148 CrossRef CAS.
  201. Y. L. Yu, P. F. Li, C. L. Zhu, N. Ning, S. Y. Zhang and G. J. Vancso, Adv. Funct. Mater., 2019, 29, 11 Search PubMed.
  202. N. W. S. Kam, M. O’Connell, J. A. Wisdom and H. J. Dai, Proc. Natl. Acad. Sci. U. S. A., 2005, 102, 11600–11605 CrossRef CAS PubMed.
  203. Z. X. Deng, Y. Guo, X. Zhao, P. X. Ma and B. L. Guo, Chem. Mater., 2018, 30, 1729–1742 CrossRef CAS.
  204. J. H. He, M. T. Shi, Y. P. Liang and B. L. Guo, Chem. Eng. J., 2020, 394, 17 Search PubMed.
  205. L. L. Ma, Y. L. Zhou, Z. W. B. Zhang, Y. Q. Liu, D. Zhai, H. Zhuang, Q. Li, J. D. Yuye, C. T. Wu and J. Chang, Sci. Adv., 2020, 6, 11 Search PubMed.
  206. B. J. Mai, M. Q. Jia, S. P. Liu, Z. H. Sheng, M. Li, Y. R. Gao, X. B. Wang, Q. H. Liu and P. Wang, ACS Appl. Mater. Interfaces, 2020, 12, 10156–10169 CrossRef CAS PubMed.
  207. M. H. Zheng, X. C. Wang, O. Yue, M. D. Hou, H. J. Zhang, S. Beyer, A. M. Blocki, Q. Wang, G. D. Gong, X. H. Liu and J. L. Guo, Biomaterials, 2021, 276, 10 CrossRef PubMed.
  208. K. Han, Q. Bai, Q. Y. Zeng, N. Sun, C. Y. Zheng, W. D. Wu, Y. N. Zhang and T. L. Lu, Mater. Des., 2022, 217, 13 Search PubMed.
  209. K. Han, Q. Bai, W. D. Wu, N. Sun, N. Cui and T. L. Lu, Int. J. Biol. Macromol., 2021, 183, 2142–2151 CrossRef CAS PubMed.
  210. Y. Wang, J. Beekman, J. Hew, S. Jackson, A. C. Issler-Fisher, R. Parungao, S. S. Lajevardi, Z. Li and P. K. M. Maitz, Adv. Drug Delivery Rev., 2018, 123, 3–17 CrossRef CAS PubMed.
  211. J. A. Burdick and G. D. Prestwich, Adv. Mater., 2011, 23, H41–H56 CrossRef CAS PubMed.
  212. J. H. Park, E. J. Park and H. S. Yi, Int. J. Lower Extremity Wounds, 2017, 16, 202–207 CrossRef CAS PubMed.
  213. J. A. del Olmo, J. M. Alonso, V. S. Martinez, L. Ruiz-Rubio, R. P. Gonzalez, J. L. Vilas-Vilela and L. Perez-Alvarez, Mater. Sci. Eng., C, 2021, 125, 18 Search PubMed.
  214. H. N. Suo, M. Hussain, H. Wang, N. Y. Zhou, J. Tao, H. Jiang and J. T. Zhu, Biomacromolecules, 2021, 22, 3049–3059 CrossRef CAS PubMed.
  215. Q. B. Dong, X. P. Zhong, Y. Q. Zhang, B. K. Bao, L. Liu, H. H. Bao, C. Y. Bao, X. S. Cheng, L. Y. Zhu and Q. N. Lin, Carbohydr. Polym., 2020, 245, 9 CrossRef PubMed.
  216. Y. P. Liang, X. Zhao, T. L. Hu, B. J. Chen, Z. H. Yin, P. X. Ma and B. L. Guo, Small, 2019, 15, 17 Search PubMed.
  217. A. Oryan, E. Alemzadeh, J. Tashkhourian and S. F. N. Ana, Carbohydr. Polym., 2018, 200, 82–92 CrossRef CAS PubMed.
  218. B. D. Zheng, J. Ye, Y. C. Yang, Y. Y. Huang and M. T. Xiao, Carbohydr. Polym., 2022, 275, 15 CrossRef PubMed.
  219. B. ter Horst, G. Chouhan, N. S. Moiemen and L. M. Grover, Adv. Drug Delivery Rev., 2018, 123, 18–32 CrossRef CAS PubMed.
  220. Y. Yuan, S. H. Shen and D. D. Fan, Biomaterials, 2021, 276, 17 CrossRef PubMed.

This journal is © The Royal Society of Chemistry 2022