Issue 13, 2020

High-performance n- and p-type organic single-crystal field-effect transistors with an air-gap dielectric towards anti-ambipolar transport

Abstract

The dielectric property has a significant effect on the performance of organic field-effect transistors (OFETs); therefore, a number of studies reported on dielectrics are focused on the development of high-performance OFETs. In this study, an air-gap dielectric was used to replace SiO2 as a low-defect insulating layer to improve the performance of OFETs. Based on the air-gap dielectric, a single-crystal ribbon of a thiophene-based quinoidal compound (TTT-CN) was first prepared, which exhibited a high electron mobility of 2.17 cm2 V−1 s−1 in air. In order to build p–n heterojunction devices, a p-type single-crystal transistor was developed, which showed a balanced mobility of 2.45 cm2 V−1 s−1, comparable to that of n-type transistors. Furthermore, the gate-tunable anti-ambipolar characteristics of FETs were demonstrated based on the p–n heterojunction obtained by combining the cross-overlapped n- and p-type single crystals with the air-gap dielectric. The reduction in the number of trap states on the air-gap layer resulted in a smaller hysteresis effect, and the value of ΔVpeak effectively reduced from 28.5 V to 6 V in anti-ambipolar transistors.

Graphical abstract: High-performance n- and p-type organic single-crystal field-effect transistors with an air-gap dielectric towards anti-ambipolar transport

Supplementary files

Article information

Article type
Communication
Submitted
31 jan 2020
Accepted
02 mar 2020
First published
04 mar 2020

J. Mater. Chem. C, 2020,8, 4303-4308

High-performance n- and p-type organic single-crystal field-effect transistors with an air-gap dielectric towards anti-ambipolar transport

J. Liu, J. Liu, J. Zhang, C. Li, Q. Cui, F. Teng, H. Li and L. Jiang, J. Mater. Chem. C, 2020, 8, 4303 DOI: 10.1039/D0TC00546K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements