Issue 5, 2023

A newly synthesized reference material for in situ sulfur isotope measurement of sphalerite using laser ablation MC-ICP-MS

Abstract

Sulfur isotopes are important tracers in various geochemical processes. A matrix-matched reference material is essential for in situ sulfur isotope ratio measurement in sphalerite (ZnS), an abundant zinc sulfide in base metal deposits. In this study, natural sphalerite powders (GBW07270) were ground into ultra-fine powders and then sintered by using a plasma-activated sintering (PAS) method at 1000 °C and 50 MPa for 10 minutes. The synthesized sphalerite has a smooth surface and dense structure, making it suitable for laser ablation analysis. To investigate whether the PAS-synthesized sphalerite is an appropriate matrix-matched reference material for in situ sulfur isotope determination, a large number of in situ S isotope measurements were performed on the PAS-synthesized sphalerite by laser ablation multi-collector inductively coupled plasma mass spectrometry (LA-MC-ICP-MS). The LA-MC-ICP-MS results are highly consistent and yield a mean δ34SV-CDT value of −5.44 ± 0.20‰ (2SD, n = 1008), which agrees well with that measured by gas source isotope ratio mass spectrometry (GS-IRMS). Therefore, the PAS-synthesized sphalerite has a homogeneous sulfur isotopic composition and is a suitable matrix-matched reference material available for in situ S isotope measurements of sphalerite.

Graphical abstract: A newly synthesized reference material for in situ sulfur isotope measurement of sphalerite using laser ablation MC-ICP-MS

Supplementary files

Article information

Article type
Paper
Submitted
29 nov 2022
Accepted
21 feb 2023
First published
17 mrt 2023

J. Anal. At. Spectrom., 2023,38, 1065-1075

A newly synthesized reference material for in situ sulfur isotope measurement of sphalerite using laser ablation MC-ICP-MS

X. Nie, Z. Bao, C. Zong, N. Lv, K. Chen and H. Yuan, J. Anal. At. Spectrom., 2023, 38, 1065 DOI: 10.1039/D2JA00394E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements