Issue 23, 2020

Preparation of a porous graphite felt electrode for advance vanadium redox flow batteries

Abstract

Rapid mass transfer and great electrochemical activity have become the critical points for designing electrodes in vanadium redox flow batteries (VRFBs). In this research, we show a porous graphite felt (GF@P) electrode to improve the electrochemical properties of VRFBs. The generation of pores on graphite felt electrodes is based on etching effects of iron to carbon. The voltage and energy efficiencies of VRFB based on the GF@P electrode can reach 72.6% and 70.7% at a current density of 200 mA cm−2, respectively, which are 8.3% and 7.9% better than that of untreated GF@U (graphite felt). Further, the VRFBs based on GF@P electrodes possess supreme stability after over 500 charge–discharge cycles at 200 mA cm−2. The high-efficiency approach reported in this study offers a new strategy for designing high-performance electrode materials applied in VRFBs.

Graphical abstract: Preparation of a porous graphite felt electrode for advance vanadium redox flow batteries

Supplementary files

Article information

Article type
Paper
Submitted
21 jan 2020
Accepted
07 mrt 2020
First published
01 apr 2020
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2020,10, 13374-13378

Preparation of a porous graphite felt electrode for advance vanadium redox flow batteries

L. Zhang, J. Yue, Q. Deng, W. Ling, C. Zhou, X. Zeng, C. Zhou, X. Wu and Y. Wu, RSC Adv., 2020, 10, 13374 DOI: 10.1039/D0RA00666A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements