Issue 3, 2020

Chloride transport in conductive polymer films for an n-type thermoelectric platform

Abstract

Cl transport in a conductive polymer (CP) film was demonstrated for n-type thermoelectric (TE) harvesting. CPs have been considered as an important group of p-type TE materials due to their high TE functionalities plus simple processing steps for a device. In particular, recently emerging p-type ionic CPs can be unique candidates due to their high Seebeck coefficients (S). However, n-type materials based on CPs suffer from very poor TE functionalities, and n-type ionic TE CP materials have not been realized so far. Here, we report the first example of n-type mixed ionic–electronic CP composite (NPC) films. The p-type TE properties of the PEDOT:PSS films was drastically converted into the n-type TE properties in the presence of CuCl2 through metal binding with polymers, thus resulting in the formation of Cl channels. Fluorescence imaging using Cl as an indicator and time-of-flight secondary ion mass spectrometry mapping confirmed that Cl is transported in the film from the hot to the cold electrode. In addition, electron spin resonance spectroscopy indicated the major spin density transition from a polaron of PEDOT:PSS to the polymer-bound unpaired electron spin of Cu ions by increasing the CuCl2 content to prove the binding of metal ions with the PSS unit of the polymer chain. These mixed ionic–electronic NPC films recorded a surprisingly high negative S value of over −18.2 mV K−1 and a power factor of 1.7 mW m−1 K−2 at 80% RH with 40 wt% of CuCl2. Taking advantage of this high performance, the CP films were integrated with a p-type CP film as a flexible module-type TE harvester with 10 pairs of p–n legs on CNT electrodes. This TE harvester showed a thermovoltage of 1.55 V for a low temperature gradient of 4.5 K. This high anion transport in a TE CP hydrogel film might be a useful solution for environmentally benign and body-worn electronics.

Graphical abstract: Chloride transport in conductive polymer films for an n-type thermoelectric platform

Supplementary files

Article information

Article type
Paper
Submitted
26 jul 2019
Accepted
06 nov 2019
First published
08 nov 2019
This article is Open Access
Creative Commons BY-NC license

Energy Environ. Sci., 2020,13, 859-867

Chloride transport in conductive polymer films for an n-type thermoelectric platform

B. Kim, J. U. Hwang and E. Kim, Energy Environ. Sci., 2020, 13, 859 DOI: 10.1039/C9EE02399B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements