Issue 31, 2016

Microstructural transitions in resistive random access memory composed of molybdenum oxide with copper during switching cycles

Abstract

The switching operation of a Cu/MoOx/TiN resistive random access memory (ReRAM) device was investigated using in situ transmission electron microscopy (TEM), where the TiN surface was slightly oxidized (ox-TiN). The relationship between the switching properties and the dynamics of the ReRAM microstructure was confirmed experimentally. The growth and/or shrinkage of the conductive filament (CF) can be classified into two set modes and two reset modes. These switching modes depend on the device's switching history, factors such as the amount of Cu inclusions in the MoOx layer and the CF geometry. High currents are needed to produce an observable change in the CF. However, sharp and stable switching behaviour can be achieved without requiring such a major change. The local region around the CF is thought to contribute to the ReRAM switching process.

Graphical abstract: Microstructural transitions in resistive random access memory composed of molybdenum oxide with copper during switching cycles

Supplementary files

Article information

Article type
Paper
Submitted
29 mrt 2016
Accepted
14 jul 2016
First published
15 jul 2016

Nanoscale, 2016,8, 14754-14766

Microstructural transitions in resistive random access memory composed of molybdenum oxide with copper during switching cycles

M. Arita, Y. Ohno, Y. Murakami, K. Takamizawa, A. Tsurumaki-Fukuchi and Y. Takahashi, Nanoscale, 2016, 8, 14754 DOI: 10.1039/C6NR02602H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements