Input of atomic layer deposition for solid oxide fuel cell applications

Michel Cassir, Armelle Ringuedé and Lauri Niinistö

J. Mater. Chem., 2010, 20, 8987
DOI: 10.1039/c0jm00590h

Heterogeneous films of ordered CeO2/Ni concentric nanostructures for fuelcell applications

Chunjuan Zhang, Jessica Grandner, Ran Liu, Sang Bok Lee and Bryan W. Eichhorn

Phys. Chem. Chem. Phys., 2010, 12, 4295
DOI: 10.1039/B918587A

Demonstration of high performance in a perovskite oxide supported solid oxide fuel cell based on La and Ca co-doped SrTiO3

Lanying Lu, Chengsheng Ni, Mark Cassidy and John T. S. Irvine

J. Mater. Chem. A, 2016, 4, 11708
DOI: 10.1039/C6TA04074H

Coke-free operation of an all porous solid oxide fuel cell (AP-SOFC) used as an O2 supply device

Y. M. Guo, G. Largiller, C. Guizard, C. Tardivat and D. Farrusseng

J. Mater. Chem. A, 2015, 3, 2684
DOI: 10.1039/C4TA05009F

Pure and Zr-doped YMnO3+δas a YSZ-compatible SOFC cathode: a combined computational and experimental approach

Zulma L. Moreno Botello, Alejandra Montenegro, Nicolas Grimaldos Osorio, Marielle Huvé, Caroline Pirovano, Didrik R. Småbråten, Sverre M. Selbach, Alberto Caneiro, Pascal Roussel and Gilles H. Gauthier

J. Mater. Chem. A, 2019, 7, 18589
DOI: 10.1039/C9TA04912F

Enhanced stability of perovskite-like SrVO3-based anode materials by donor-type substitutions

Javier Macías, Aleksey A. Yaremchenko and Jorge R. Frade

J. Mater. Chem. A, 2016, 4, 10186
DOI: 10.1039/C6TA02672A

Thermodynamic and electrical characteristics of NdBaCo2O5+δat various oxidation and reduction states

Seonyoung Yoo, Jee Young Shin and Guntae Kim

J. Mater. Chem., 2011, 21, 439
DOI: 10.1039/C0JM01779E

Methane steam reforming over Ni/YSZ cermet anode materials synthesized by different methods

S. Bassil, T. Caillot, F. J. Cadete Santos Aires, F. C. Meunier and A. Kaddouri

React. Chem. Eng., 2024, 9, 1251
DOI: 10.1039/D3RE00679D

A catalyst support for direct-ammonia solid-oxide fuel cell anodes based on lanthanum titanium oxynitride

Saurav Sorcar, Hodaya Zinowits, Eswaravara Prasadarao Komarala, Nomi Moshe, Ira Agranovich and Brian A. Rosen

J. Mater. Chem. A, 2022, 10, 24115
DOI: 10.1039/D2TA01977A

Nano La0.6Ca0.4Fe0.8Ni0.2O3−δ decorated porous doped ceria as a novel cobalt-free electrode for “symmetrical” solid oxide fuel cells

Guangming Yang, Chao Su, Yubo Chen, Moses O. Tadé and Zongping Shao

J. Mater. Chem. A, 2014, 2, 19526
DOI: 10.1039/C4TA03485F

Ni–M (M = Sn and Sb) intermetallic-based catalytic functional layer as a built-in safeguard for hydrocarbon-fueled solid oxide fuel cells

Daeil Yoon and Arumugam Manthiram

J. Mater. Chem. A, 2015, 3, 21824
DOI: 10.1039/C5TA05498B

Correlation between fast oxygen kinetics and enhanced performance in Fe doped layered perovskite cathodes for solid oxide fuel cells

Areum Jun, Seonyoung Yoo, Young-Wan Ju, Junji Hyodo, Sihyuk Choi, Hu Young Jeong, Jeeyoung Shin, Tatsumi Ishihara, Tak-hyoung Lim and Guntae Kim

J. Mater. Chem. A, 2015, 3, 15082
DOI: 10.1039/C5TA02158H

Recent advances in carbon-resistant anodes for solid oxide fuel cells

Wei Zhang, Jialu Wei, Fusheng Yin and Chunwen Sun

Mater. Chem. Front., 2023, 7, 1943
DOI: 10.1039/D2QM01366E

An integral proton conducting SOFC for simultaneous production of ethylene and power from ethane

Xian-Zhu Fu, Jing-Li Luo, Alan R. Sanger, Nemanja Danilovic and Karl T. Chuang

Chem. Commun., 2010, 46, 2052
DOI: 10.1039/b926928b

A robust symmetrical electrode with layered perovskite structure for direct hydrocarbon solid oxide fuel cells: PrBa0.8Ca0.2Mn2O5+δ

S. Choi, S. Sengodan, S. Park, Y.-W. Ju, J. Kim, J. Hyodo, H. Y. Jeong, T. Ishihara, J. Shin and G. Kim

J. Mater. Chem. A, 2016, 4, 1747
DOI: 10.1039/C5TA08878J

High redox and performance stability of layered SmBa0.5Sr0.5Co1.5Cu0.5O5+δ perovskite cathodes for intermediate-temperature solid oxide fuel cells

Areum Jun, Jeeyoung Shin and Guntae Kim

Phys. Chem. Chem. Phys., 2013, 15, 19906
DOI: 10.1039/c3cp53883d

Ni Modified WC-Based Anode Materials for Direct Methane Solid Oxide Fuel Cells

Alireza Torabi and Thomas H. Etsell

J. Electrochem. Soc., 2012, 159, B714
DOI: 10.1149/2.055206jes

Computational analysis of atomic C and S adsorption on Ni, Cu, and Ni-Cu SOFC anode surfaces

Lichao Jia, Xin Wang, Bin Hua, Wenlu Li, Bo Chi, Jian Pu, Songliu Yuan and Li Jian

International Journal of Hydrogen Energy, 2012, 37, 11941
DOI: 10.1016/j.ijhydene.2012.05.041

Anode Composites Based on NiO and Apatite-Type Lanthanum Silicate for Intermediate Temperature Solid Oxide Fuel Cells

Tamara Kharlamova, Svetlana Pavlova, Vladislav Sadykov, Tamara Krieger, Galina Alikina, Jorge Frade and Christos Argirusis

MRS Proc., 2008, 1098
DOI: 10.1557/PROC-1098-HH07-02

Materials for Solid Oxide Fuel Cells

Allan J. Jacobson

Chem. Mater., 2010, 22, 660
DOI: 10.1021/cm902640j

Carbon tolerance, electrochemical performance and stability of solid oxide fuel cells with Ni/yttria stabilized zirconia anodes impregnated with Sn and operated with methane

Anand Singh and Josephine M. Hill

Journal of Power Sources, 2012, 214, 185
DOI: 10.1016/j.jpowsour.2012.04.062

Role of nanostructures on SOFC performance at reduced temperatures

Kang Taek Lee and Eric D. Wachsman

MRS Bull., 2014, 39, 783
DOI: 10.1557/mrs.2014.193

Ni-Free SOFC Anode Material with Thermal and Redox Stabilities for the Direct Utilization of Ethanol

Selma Aparecida Venâncio and Paulo Emilio Valadão de Miranda

Catalysts, 2023, 13, 134
DOI: 10.3390/catal13010134

Lamellar Titanates: A Breakthrough in the Search for New Solid Oxide Fuel Cell Anode Materials Operating on Methane

Cédric Périllat‐Merceroz, Pascal Roussel, Rose‐Noëlle Vannier, Patrick Gélin, Sébastien Rosini and Gilles Gauthier

Advanced Energy Materials, 2011, 1, 573
DOI: 10.1002/aenm.201100107

Electrochemical behavior of solid oxide fuel cell anodes based on infiltration of Y-doped SrTiO3

Alireza Torabi and Thomas H. Etsell

Journal of Power Sources, 2013, 225, 51
DOI: 10.1016/j.jpowsour.2012.09.109

Pure and Mn-doped La4SrTi5O17 layered perovskite as potential solid oxide fuel cell material: Structure and anodic performance

Cédric Périllat-Merceroz, Pascal Roussel, Marielle Huvé, Edouard Capoen, Sébastien Rosini, Patrick Gélin, Rose-Noëlle Vannier and Gilles H. Gauthier

Journal of Power Sources, 2015, 274, 806
DOI: 10.1016/j.jpowsour.2014.10.131

Microstructural changes in nickel‐ceria fuel electrodes at elevated temperature

Yanting Liu, Florian Wankmüller, Tibor Peter Lehnert, Martin Juckel, Norbert H. Menzler and André Weber

Fuel Cells, 2023, 23, 430
DOI: 10.1002/fuce.202300057

Direct Utilization of Liquid Fuels in SOFC for Portable Applications: Challenges for the Selection of Alternative Anodes

Massimiliano Cimenti and Josephine M. Hill

Energies, 2009, 2, 377
DOI: 10.3390/en20200377

Correlation of Fuel Cell Anode Electrocatalytic and ex situ Catalytic Activity of Perovskites La0.75Sr0.25Cr0.5X0.5O3−δ (X = Ti, Mn, Fe, Co)

Nemanja Danilovic, Adrien Vincent, Jing-Li Luo, Karl T. Chuang, Rob Hui and Alan R. Sanger

Chem. Mater., 2010, 22, 957
DOI: 10.1021/cm901875u

High‐Performance SOFC Cathodes Prepared by Infiltration

John M. Vohs and Raymond J. Gorte

Advanced Materials, 2009, 21, 943
DOI: 10.1002/adma.200802428

Highly Stable and Efficient Perovskite Ferrite Electrode for Symmetrical Solid Oxide Fuel Cells

Weiwei Fan, Zhu Sun, Yu Bai, Kai Wu and Yonghong Cheng

ACS Appl. Mater. Interfaces, 2019, 11, 23168
DOI: 10.1021/acsami.9b04286

Air plasma sprayed Cu–Co–GDC anode coatings with various Co loadings

Nir Light and Olivera Kesler

Journal of Power Sources, 2013, 233, 157
DOI: 10.1016/j.jpowsour.2013.01.050

Cobalt Alloying Effect on Improvement of Ni/YSZ Anode-Supported Solid Oxide Fuel Cell Operating with Dry Methane

Nicharee Wongsawatgul, Soamwadee Chaianansutcharit, Kazuhiro Yamamoto, Makoto Nanko and Kazunori Sato

Mater. Trans., 2021, 62, 1541
DOI: 10.2320/matertrans.MT-M2020355

SOFC Anodes Based on LST–YSZ Composites and on Y[sub 0.04]Ce[sub 0.48]Zr[sub 0.48]O[sub 2]

Guntae Kim, Michael D. Gross, Wensheng Wang, John M. Vohs and Raymond J. Gorte

J. Electrochem. Soc., 2008, 155, B360
DOI: 10.1149/1.2840473

Ni and Ni-Co La0.8Sr0.2Ga0.8Mg0.2O3−δ infiltrated cells in H2and CH4/CO2 mixture

Elisabetta Di Bartolomeo, Francesco Basoli, Igor Luisetto, Simonetta Tuti, Francesca Zurlo, Zahra Salehi and Silvia Licoccia

Applied Catalysis B: Environmental, 2016, 191, 1
DOI: 10.1016/j.apcatb.2016.03.010

Numerical study on the impact of carbon deposition on methane/steam mass transport in solid oxide fuel cell porous anode using lattice Boltzmann modeling

Xiaoxing Yang, Guogang Yang, Shian Li, Qiuwan Shen, Jinliang Yuan, He Miao, Ziheng Jiang, Jiadong Liao, Han Sun, Yinhui Sun and Baixun Sun

Materials Today Communications, 2024, 38, 107998
DOI: 10.1016/j.mtcomm.2023.107998

Solution combustion synthesis of Ce0.6Mn0.3Fe0.1O2 for anode of SOFC using LaGaO3-based oxide electrolyte

Chunyu Zhu, Akira Nobuta, Young-Wan Ju, Tatsumi Ishihara and Tomohiro Akiyama

International Journal of Hydrogen Energy, 2013, 38, 13419
DOI: 10.1016/j.ijhydene.2013.08.007

Solid oxide fuel cell anodes prepared by infiltration of strontium doped lanthanum vanadate into doped ceria electrolyte

K. Tamm, R. Küngas, R.J. Gorte and E. Lust

Electrochimica Acta, 2013, 106, 398
DOI: 10.1016/j.electacta.2013.05.127

Thermodynamic and Electrical Properties of Layered Perovskite NdBaCo2−xFexO5+δ−YSZ (x = 0, 1) Composites for Intermediate Temperature SOFC Cathodes

Seonyoung Yoo, Jee Young Shin and Guntae Kim

J. Electrochem. Soc., 2011, 158, B632
DOI: 10.1149/1.3571008

Fabrication and electrochemical properties of SOFC single cells using porous yttria-stabilized zirconia ceramic support layer coated with Ni

Myong-Jin Lee, Jae-Hak Jung, Kai Zhao, Bok-Hee Kim, Qing Xu, Byung-Guk Ahn, Spencer Seung-Hyun Kim and Sung-Youl Kim

Journal of the European Ceramic Society, 2014, 34, 1771
DOI: 10.1016/j.jeurceramsoc.2013.12.042

Structural, Electrical, and Electrochemical Characteristics of LnBa0.5Sr0.5Co1.5Fe0.5O5+δ (Ln=Pr, Sm, Gd) as Cathode Materials in Intermediate‐Temperature Solid Oxide Fuel Cells

Donghwi Jeong, Areum Jun, Young‐Wan Ju, Junji Hyodo, Jeeyoung Shin, Tatsumi Ishihara, Tak‐Hyoung Lim and Guntae Kim

Energy Tech, 2017, 5, 1337
DOI: 10.1002/ente.201600618

Nanostructured anodes for solid oxide fuel cells

R.J. Gorte and J.M. Vohs

Current Opinion in Colloid & Interface Science, 2009, 14, 236
DOI: 10.1016/j.cocis.2009.04.006

Characterization and analysis methods for the examination of the heterogeneous solid oxide fuel cell electrode microstructure. Part 1: Volumetric measurements of the heterogeneous structure

Kyle N. Grew, Aldo A. Peracchio, Abhijit S. Joshi, John R. Izzo and Wilson K.S. Chiu

Journal of Power Sources, 2010, 195, 7930
DOI: 10.1016/j.jpowsour.2010.07.005

Powering Solid Oxide Fuel Cells with Syngas Using La0.4Sr0.5Ba0.1TiO3 Anode Infitrated with Nano‐composite

Y. Zeng, K. Li, T. Gao, N. Yan and J.‐L. Luo

Fuel Cells, 2019, 19, 141
DOI: 10.1002/fuce.201800154

Calcium stabilized La0.6Sr0.4Fe0.8Mn0.2O3-δ perovskite as ceramic fuel electrode for solid oxide cell

Zefeng Heng, Yanhong Wan and Changrong Xia

Journal of Power Sources, 2022, 537, 231535
DOI: 10.1016/j.jpowsour.2022.231535

Hydrocarbon Compatible SOFC Anode Catalysts and Their Syntheses: A Review

Selvaraj Senthil Kumar and Singanahally ThippaReddy Aruna

Sustainable Chemistry, 2021, 2, 707
DOI: 10.3390/suschem2040039

Barium-modified NiO–YSZ/NiO–GDC cermet as new anode material for solid oxide fuel cells (SOFC)

Mónica V. Sandoval, Aracely Matta, Tulio Matencio, Rosana Zacarias Domingues, Gustavo A. Ludwig, Matias De Angelis Korb, Célia de Fraga Malfatti, Paola Gauthier-Maradei and Gilles H. Gauthier

Solid State Ionics, 2014, 261, 36
DOI: 10.1016/j.ssi.2014.04.014

Investigation of cobalt-free perovskite Sr2FeTi0.75Mo0.25O6−δ as new cathode for solid oxide fuel cells

Qingjun Zhou, Ye Cheng, Weidong Li, Xin Yang, Jincheng Liu, Dongmin An, Xiaoqiang Tong, Binchao Zhong and Weibo Wang

Materials Research Bulletin, 2016, 74, 129
DOI: 10.1016/j.materresbull.2015.09.023

Molybdenum dioxide-based anode for solid oxide fuel cell applications

Byeong Wan Kwon, Caleb Ellefson, Joe Breit, Jinsoo Kim, M. Grant Norton and Su Ha

Journal of Power Sources, 2013, 243, 203
DOI: 10.1016/j.jpowsour.2013.05.133

Thermodynamic analysis of solid oxide fuel cells operated with methanol and ethanol under direct utilization, steam reforming, dry reforming or partial oxidation conditions

M. Cimenti and J.M. Hill

Journal of Power Sources, 2009, 186, 377
DOI: 10.1016/j.jpowsour.2008.10.043

Carbon tolerance of Ni–Cu and Ni–Cu/YSZ sub-μm sized SOFC thin film model systems

Thomas Götsch, Thomas Schachinger, Michael Stöger-Pollach, Reinhard Kaindl and Simon Penner

Applied Surface Science, 2017, 402, 1
DOI: 10.1016/j.apsusc.2017.01.076

Ni-(Ce0.8-xTix)Sm0.2O2-δ anode for low temperature solid oxide fuel cells running on dry methane fuel

Bing Han, Kai Zhao, Xiaoxue Hou, Dong-Jin Kim, Bok-Hee Kim, Su Ha, M. Grant Norton, Qing Xu and Byung-Guk Ahn

Journal of Power Sources, 2017, 338, 1
DOI: 10.1016/j.jpowsour.2016.11.024

Probing Surface/Bulk Structural Chemistry of Key Components of Solid Oxide Electrochemical Cells with In Situ/Operando Raman Spectroscopy

Neelesh Kumar, Musa O. Najimu, Yoon Jin Cho, Kandis Leslie Gilliard-AbdulAziz, Eranda Nikolla, Zili Wu and Israel E. Wachs

Chem. Rev., 2025, 125, 8921
DOI: 10.1021/acs.chemrev.5c00222

In situ fabrication of CoFe alloy nanoparticles structured (Pr0.4Sr0.6)3(Fe0.85Nb0.15)2O7 ceramic anode for direct hydrocarbon solid oxide fuel cells

Chenghao Yang, Jiao Li, Ye Lin, Jiang Liu, Fanglin Chen and Meilin Liu

Nano Energy, 2015, 11, 704
DOI: 10.1016/j.nanoen.2014.12.001

Sr2Fe1.5Mo0.5O6 as Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells with La0.8Sr0.2Ga0.87Mg0.13O3 Electrolyte

Guoliang Xiao, Qiang Liu, Fei Zhao, Lei Zhang, Changrong Xia and Fanglin Chen

J. Electrochem. Soc., 2011, 158, B455
DOI: 10.1149/1.3556085

Structural features of the magnetron sputtered CuO/GDC anodes for solid oxide fuel cells

A A Solovyev, I V Ionov, V A Semenov, A V Shipilova and S V Rabotkin

J. Phys.: Conf. Ser., 2019, 1393, 012140
DOI: 10.1088/1742-6596/1393/1/012140

Fabrication of an electrolyte-supported protonic ceramic fuel cell with nano-sized powders of Ni-composite anode

Sung Hyun Hwang, Soon Ki Kim, Jun-Tae Nam and Jong-Sung Park

International Journal of Hydrogen Energy, 2021, 46, 1076
DOI: 10.1016/j.ijhydene.2020.09.172

Cu–YSZ cermet solid oxide fuel cell anode prepared by high-temperature sintering

Michael C. Tucker, Grace Y. Lau, Craig P. Jacobson, Steven J. Visco and Lutgard C. De Jonghe

Journal of Power Sources, 2010, 195, 3119
DOI: 10.1016/j.jpowsour.2009.12.003

Direct Conversion of Methane to C2Hydrocarbons in Solid-State Membrane Reactors at High Temperatures

Vivian Vazquez Thyssen, Vanessa Bezerra Vilela, Daniel Zanetti de Florio, Andre Santarosa Ferlauto and Fabio Coral Fonseca

Chem. Rev., 2022, 122, 3966
DOI: 10.1021/acs.chemrev.1c00447

Advanced ceramic materials for electrolytes and electrodes in reversible solid oxide cells

Panagiotis Kopras, Constantinos Tsanaktsidis and Nikolas Kiratzis

Academia Green Energy, 2024, 1
DOI: 10.20935/AcadEnergy7390

Propane Fuel Cells: Selectivity for Partial or Complete Reaction

Shadi Vafaeyan, Alain St-Amant and Marten Ternan

Journal of Fuels, 2014, 2014, 1
DOI: 10.1155/2014/485045

Enhanced power density in hydrocarbon-compatible anode-supported solid oxide fuel cell facilitated by a functional anode catalyst layer

S Senthil Kumar, V Jayaram and S T Aruna

Nanomaterials and Energy, 2021, 10, 118
DOI: 10.1680/jnaen.20.00063

A redox-stable direct-methane solid oxide fuel cell (SOFC) with Sr2FeNb0.2Mo0.8O6−δ double perovskite as anode material

Hanping Ding, Zetian Tao, Shun Liu and Yating Yang

Journal of Power Sources, 2016, 327, 573
DOI: 10.1016/j.jpowsour.2016.07.101

Air plasma spray processing and electrochemical characterization of Cu–SDC coatings for use in solid oxide fuel cell anodes

Nir Benoved and O. Kesler

Journal of Power Sources, 2009, 193, 454
DOI: 10.1016/j.jpowsour.2009.04.003

Solid oxide fuel cell anode for the direct utilization of ethanol as a fuel

Selma A. Venâncio and Paulo Emílio V. de Miranda

Scripta Materialia, 2011, 65, 1065
DOI: 10.1016/j.scriptamat.2011.09.017

Effect of anode firing on the performance of lanthanum and nickel co-doped SrTiO3 (La0.2Sr0.8Ti0.9Ni0.1O3−δ) anode of solid oxide fuel cell

Byung Hyun Park and Gyeong Man Choi

Journal of Power Sources, 2015, 293, 684
DOI: 10.1016/j.jpowsour.2015.06.005

First-Principles Modeling of Ni4M (M = Co, Fe, and Mn) Alloys as Solid Oxide Fuel Cell Anode Catalyst for Methane Reforming

Ho-Cheng Tsai, Sergey I. Morozov, Ted H. Yu, Boris V. Merinov and William A. Goddard

J. Phys. Chem. C, 2016, 120, 207
DOI: 10.1021/acs.jpcc.5b06847

Evaluation of a Cu/YSZ and Ni/YSZ Bilayer Anode for the Direct Utilization of Methane in a Solid‐Oxide Fuel Cell

M. A. Buccheri and J. M. Hill

Fuel Cells, 2014, 14, 162
DOI: 10.1002/fuce.201300035

Review on Ruddlesden–Popper perovskites as cathode for solid oxide fuel cells

Peipei Ding, Wenlu Li, Hanwen Zhao, Congcong Wu, Li Zhao, Binghai Dong and Shimin Wang

J. Phys. Mater., 2021, 4, 022002
DOI: 10.1088/2515-7639/abe392

n-Hexadecane Fuel for a Phosphoric Acid Direct Hydrocarbon Fuel Cell

Yuanchen Zhu, Travis Robinson, Amani Al-Othman, André Y. Tremblay and Marten Ternan

Journal of Fuels, 2015, 2015, 1
DOI: 10.1155/2015/748679

Electrochemical behaviour of tungsten carbide-based materials as candidate anodes for solid oxide fuel cells

Alireza Torabi, Thomas H. Etsell, Natalia Semagina and Partha Sarkar

Electrochimica Acta, 2012, 67, 172
DOI: 10.1016/j.electacta.2012.02.017

Enhancing Stability and Catalytic Activity by In Situ Exsolution for High-Performance Direct Hydrocarbon Solid Oxide Fuel Cell Anodes

Xiaoxia Yang, Wang Sun, Minjian Ma, Chunming Xu, Rongzheng Ren, Jinshuo Qiao, Zhenhua Wang, Shuying Zhen and Kening Sun

Ind. Eng. Chem. Res., 2021, 60, 7826
DOI: 10.1021/acs.iecr.1c00806

Exsolution of nickel nanoparticles at the surface of a conducting titanate as potential hydrogen electrode material for solid oxide electrochemical cells

Charline Arrivé, Thibaud Delahaye, Olivier Joubert and Gilles Gauthier

Journal of Power Sources, 2013, 223, 341
DOI: 10.1016/j.jpowsour.2012.09.062

Self‐Recovery of Pd Nanoparticles That Were Dispersed over La(Sr)Fe(Mn)O3 for Intelligent Oxide Anodes of Solid‐Oxide Fuel Cells

Tae Ho Shin, Yohei Okamoto, Shintaro Ida and Tatsumi Ishihara

Chemistry A European J, 2012, 18, 11695
DOI: 10.1002/chem.201200536

Perovskite as a Cathode Material: A Review of its Role in Solid‐Oxide Fuel Cell Technology

Areum Jun, Junyoung Kim, Jeeyoung Shin and Guntae Kim

ChemElectroChem, 2016, 3, 511
DOI: 10.1002/celc.201500382

Performance of a Direct Methane Solid Oxide Fuel Cell Using Nickel-Ceria-Yttria Stabilized Zirconia as the Anode

María José Escudero, María Pilar Yeste, Miguel Ángel Cauqui and Miguel Ángel Muñoz

Materials, 2020, 13, 599
DOI: 10.3390/ma13030599

Perovskite nanocomposites: synthesis, properties, and applications from renewable energy to optoelectronics

Yunseok Choi, Sangmoon Han, Bo-In Park, Zhihao Xu, Qingge Huang, Sanggeun Bae, Justin S. Kim, Sun Ok Kim, Yuan Meng, Seung‐Il Kim, Ji‐Yun Moon, Ilpyo Roh, Ji-Won Park and Sang‑Hoon Bae

Nano Convergence, 2024, 11
DOI: 10.1186/s40580-024-00440-7

Tailoring the solid oxide fuel cell anode support composition and microstructure for low‐temperature applications

Sajad Vafaeenezhad, Amir Reza Hanifi, Mark Cuglietta, Mohtada Sadrzadeh, Partha Sarkar and Thomas H. Etsell

Fuel Cells, 2023, 23, 202
DOI: 10.1002/fuce.202200069

Double perovskite Ba2FeMoO6−δ as fuel electrode for protonic-ceramic membranes

Hanping Ding, Neal P. Sullivan and Sandrine Ricote

Solid State Ionics, 2017, 306, 97
DOI: 10.1016/j.ssi.2017.04.007

Doped-Ceria Diffusion Barriers Prepared by Infiltration for Solid Oxide Fuel Cells

R. Küngas, F. Bidrawn, J. M. Vohs and R. J. Gorte

Electrochem. Solid-State Lett., 2010, 13, B87
DOI: 10.1149/1.3432253

System-level monitoring and diagnosis of starvation faults in solid oxide electrolyzers

Zaman Yazbeck, Federico Bribiesca-Argomedo, Minh Tu Pham, Bertrand Morel and Vincent Dimitriou

International Journal of Hydrogen Energy, 2026, 198, 152808
DOI: 10.1016/j.ijhydene.2025.152808

Sr2MgMoO6−δ thin films fabricated using pulsed-laser deposition with high concentrations of oxygen vacancies

K. Shigematsu, A. Chikamatsu, T. Fukumura, S. Toyoda, E. Ikenaga and T. Hasegawa

Applied Physics Letters, 2014, 104
DOI: 10.1063/1.4886136

Stability of strontium-doped lanthanum manganite cathode in humidified air

Boxun Hu, Michael Keane, Manoj K. Mahapatra and Prabhakar Singh

Journal of Power Sources, 2014, 248, 196
DOI: 10.1016/j.jpowsour.2013.08.098

Gadolinium Doped Ceria as Nickel–Free Fuel Electrode in High Temperature CO2‐Electrolysis

Jan Uecker, Ifeanyichukwu D. Unachukwu, Vaibhav Vibhu, Izaak C. Vinke, L. G. J. (Bert) de Haart and Rüdiger‐A. Eichel

ChemElectroChem, 2024, 11
DOI: 10.1002/celc.202300617

Electrical Properties of Sr0.86Y0.08TiO3 Under Redox and Full Cell Fabrication Conditions

Li Zhao and Jacob Brouwer

Journal of Fuel Cell Science and Technology, 2012, 9
DOI: 10.1115/1.4007117

Importance of pyrolysis and catalytic decomposition for the direct utilization of methanol in solid oxide fuel cells

Massimiliano Cimenti and Josephine M. Hill

Journal of Power Sources, 2010, 195, 54
DOI: 10.1016/j.jpowsour.2009.07.007

Synthesis and properties of La0.05Ba0.95Ti1−M O3 (M = Mn, Ce) as anode materials for solid oxide fuel cells

Cédric Périllat-Merceroz, Pascal Roussel, Edouard Capoen, Sébastien Rosini, Patrick Gélin, Rose-Noëlle Vannier and Gilles Gauthier

Solid State Ionics, 2015, 283, 21
DOI: 10.1016/j.ssi.2015.11.005

A mechanistic study of the interactions between methane and nickel supported on doped ceria

Mengzheng Ouyang, Paul Boldrin, Robert C. Maher, Xiaolong Chen, Xinhua Liu, Lesley F. Cohen and Nigel P. Brandon

Applied Catalysis B: Environmental, 2019, 248, 332
DOI: 10.1016/j.apcatb.2019.02.038

Oxygen self-diffusion and conductivity measurements in apatite type electrolyte materials for SOFCs

Christos Argirusis, Ezhil Jothinathan, Georgia Sourkouni, Omer Van der Biest and Francois Jomard

Solid State Ionics, 2014, 257, 53
DOI: 10.1016/j.ssi.2014.01.035

Rational Design of Ruddlesden–Popper Perovskite Ferrites as Air Electrode for Highly Active and Durable Reversible Protonic Ceramic Cells

Na Yu, Idris Temitope Bello, Xi Chen, Tong Liu, Zheng Li, Yufei Song and Meng Ni

Nano-Micro Lett., 2024, 16
DOI: 10.1007/s40820-024-01397-2

Fabrication and modification of solid oxide fuel cell anodes via wet impregnation/infiltration technique

Zhangbo Liu, Beibei Liu, Dong Ding, Mingfei Liu, Fanglin Chen and Changrong Xia

Journal of Power Sources, 2013, 237, 243
DOI: 10.1016/j.jpowsour.2013.03.025

Enhanced Carbon Deposition Tolerance of SOFC Anodes Under Triode Operation

Ioanna Petrakopoulou, Dimitrios Tsiplakides and Stella Balomenou

Top Catal, 2015, 58, 1303
DOI: 10.1007/s11244-015-0498-2

Direct methanol utilization in intermediate temperature liquid-tin anode solid oxide fuel cells

Boxun Hu, Michael Keane, Kailash Patil, Manoj K. Mahapatra, Ugur Pasaogullari and Prabhakar Singh

Applied Energy, 2014, 134, 342
DOI: 10.1016/j.apenergy.2014.08.030

Effect of interaction between Ni and YSZ on coke deposition during steam reforming of methane on Ni/YSZ anode catalysts for an IR-SOFC

Hiroki Takahashi, Tatsuya Takeguchi, Norikazu Yamamoto, Motofumi Matsuda, Eiko Kobayashi and Wataru Ueda

Journal of Molecular Catalysis A: Chemical, 2011, 350, 69
DOI: 10.1016/j.molcata.2011.09.007

RuO2 nanoparticle-modified (Ce,Mn,Fe)O2/(La,Sr) (Fe,Mn)O3 composite oxide as an active anode for direct hydrocarbon type solid oxide fuel cells

Tae Ho Shin, Hidehisa Hagiwara, Shintaro Ida and Tatsumi Ishihara

Journal of Power Sources, 2015, 289, 138
DOI: 10.1016/j.jpowsour.2015.04.093

Transition metal (oxy)carbides for protonic ceramic cells: Opportunities and challenges of molybdenum (oxy)carbide

Allan J.M. Araújo, Laura I.V. Holz, Vanessa C.D. Graça, Sergey M. Mikhalev and Francisco J.A. Loureiro

Chemical Engineering Journal, 2026, 533, 174739
DOI: 10.1016/j.cej.2026.174739

Direct utilization of ethanol on ceria‐based anodes for solid oxide fuel cells

Massimiliano Cimenti and Josephine M. Hill

Asia-Pacific J Chem Eng, 2009, 4, 45
DOI: 10.1002/apj.182

Solid Oxide Fuel Cell Anode Materials

E. M. Brodnikovskii

Powder Metall Met Ceram, 2015, 54, 166
DOI: 10.1007/s11106-015-9694-7

Improve electrical conductivity of reduced La2Ni0.9Fe0.1O4+δ as the anode of a solid oxide fuel cell by carbon deposition

Ping Li, Yicheng Zhao, Baolong Yu, Jiang Li and Yongdan Li

International Journal of Hydrogen Energy, 2015, 40, 9783
DOI: 10.1016/j.ijhydene.2015.06.026

Phase field modeling of microstructure evolution and concomitant effective conductivity change in solid oxide fuel cell electrodes

Yinkai Lei, Tian-Le Cheng and You-Hai Wen

Journal of Power Sources, 2017, 345, 275
DOI: 10.1016/j.jpowsour.2017.02.007

Polarization-Induced Hysteresis in CuCo-Doped Rare Earth Vanadates SOFC Anodes

Lawrence Adijanto, Venu Balaji Padmanabhan, Raymond J. Gorte and John M. Vohs

J. Electrochem. Soc., 2012, 159, F751
DOI: 10.1149/2.042211jes

Preserving Nanomorphology in YSZ Scaffolds at High Temperatures via In Situ Carbon Templating of Hybrid Materials

Matthew Cottam, Sixbert Muhoza, Michael D. Gross and J. Stevenson

J. Am. Ceram. Soc., 2016, 99, 2625
DOI: 10.1111/jace.14306

Redox Behavior and Transport Properties of Composites Based on (Fe,Ni)3O4 ± δ for Anodes of Solid Oxide Fuel Cells

V. A. Kolotygin, V. A. Noskova, S. I. Bredikhin and V. V. Kharton

Russ J Electrochem, 2018, 54, 506
DOI: 10.1134/S1023193518060071

The review of advances in interfacial electrochemistry in Estonia: electrochemical double layer and adsorption studies for the development of electrochemical devices

Piret Pikma, Heigo Ers, Liis Siinor, Jinfeng Zhao, Ove Oll, Tavo Romann, Vitali Grozovski, Carolin Siimenson, Mart Väärtnõu, Maarja Paalo, Riinu Härmas, Karmen Lust, Thomas Thomberg, Alar Jänes, Jaak Nerut, Rutha Jäger, Peeter Valk, Indrek Kivi, Martin Maide, Priit Möller, Rait Kanarbik, Gunnar Nurk and Enn Lust

J Solid State Electrochem, 2023, 27, 1547
DOI: 10.1007/s10008-022-05338-0

Comparison of microstructural evolution of fuel electrodes in solid oxide fuel cells and electrolysis cells

M. Trini, A. Hauch, S. De Angelis, X. Tong, P. Vang Hendriksen and M. Chen

Journal of Power Sources, 2020, 450, 227599
DOI: 10.1016/j.jpowsour.2019.227599

Model System Supported Impedance Simulation of Composite Electrodes

A. K. Opitz, M. Gerstl and M. Bram

Fuel Cells, 2019, 19, 417
DOI: 10.1002/fuce.201800198

Investigating the CH4 reaction pathway on a novel LSCF anode catalyst in the SOFC

James C. Fisher and Steven S.C. Chuang

Catalysis Communications, 2009, 10, 772
DOI: 10.1016/j.catcom.2008.11.035

Electrode materials and reaction mechanisms in solid oxide fuel cells: a brief review. III. Recent trends and selected methodological aspects

Ekaterina V. Tsipis and Vladislav V. Kharton

J Solid State Electrochem, 2011, 15, 1007
DOI: 10.1007/s10008-011-1341-8

Ni-doped Ba0.9Zr0.8Y0.2O3-δ as a methane dry reforming catalyst for direct CH4–CO2 solid oxide fuel cells

Peng Qiu, Lei Wu, Kun Cheng, Shaowen Wu, Huiying Qi, Chunyan Xiong and Baofeng Tu

International Journal of Hydrogen Energy, 2023, 48, 27805
DOI: 10.1016/j.ijhydene.2023.03.391

A comprehensive review of solid oxide fuel cells operating on various promising alternative fuels

Qidong Xu, Zengjia Guo, Lingchao Xia, Qijiao He, Zheng Li, Idris Temitope Bello, Keqing Zheng and Meng Ni

Energy Conversion and Management, 2022, 253, 115175
DOI: 10.1016/j.enconman.2021.115175

Effects of anode microstructures on durability of microtubular solid oxide fuel cells during internal steam reforming of methane

Hirofumi Sumi, Toshiaki Yamaguchi, Toshio Suzuki, Hiroyuki Shimada, Koichi Hamamoto and Yoshinobu Fujishiro

Electrochemistry Communications, 2014, 49, 34
DOI: 10.1016/j.elecom.2014.10.006

Electrochemical performance and carbon deposition resistance of M-BaZr0.1Ce0.7Y0.1Yb0.1O3-δ (M = Pd, Cu, Ni or NiCu) anodes for solid oxide fuel cells

Meng Li, Bin Hua, Jian Pu, Bo Chi and Li Jian

Sci Rep, 2015, 5
DOI: 10.1038/srep07667

Solid Oxide Fuel Cell Anode Materials for Direct Hydrocarbon Utilization

Xiao‐Ming Ge, Siew‐Hwa Chan, Qing‐Lin Liu and Qiang Sun

Advanced Energy Materials, 2012, 2, 1156
DOI: 10.1002/aenm.201200342

Synthesis and preliminary study of NdxAE2-xMnO4±δ (AE: Ca, Sr) for symmetrical SOFC electrodes

Mónica V. Sandoval, Silvia Durán, Andrea Prada, Caroline Pirovano, Olivier Gardoll, Pascal Roussel and Gilles H. Gauthier

Solid State Ionics, 2018, 317, 194
DOI: 10.1016/j.ssi.2018.01.025

Overview of porous media/metal foam application in fuel cells and solar power systems

Weng Cheong Tan, Lip Huat Saw, Hui San Thiam, Jin Xuan, Zuansi Cai and Ming Chian Yew

Renewable and Sustainable Energy Reviews, 2018, 96, 181
DOI: 10.1016/j.rser.2018.07.032

Ti-doped molybdenum-based perovskites as anodes for solid oxide fuel cells

Beibei He, Zhenbin Wang, Ling Zhao, Xin Pan, Xiaojun Wu and Changrong Xia

Journal of Power Sources, 2013, 241, 627
DOI: 10.1016/j.jpowsour.2013.04.148

Novel Electrode Evaluation Method for Pulse Jet Solid Oxide Fuel Cells using Liquid Hydrocarbon Fuels

Yuta Iida, Keisuke Kameda and Manabu Ihara

J. Electrochem. Soc., 2021, 168, 084505
DOI: 10.1149/1945-7111/ac15b6

High-Performance-Based Perovskite-Supported Nanocomposite for the Development of Green Energy Device Applications: An Overview

Tse-Wei Chen, Rasu Ramachandran, Shen-Ming Chen, Ganesan Anushya, Selvarajan Divya Rani, Vinitha Mariyappan, Perumal Elumalai and Nagamalai Vasimalai

Nanomaterials, 2021, 11, 1006
DOI: 10.3390/nano11041006

Restructuring Porous YSZ by Treatment in Hydrofluoric Acid for Use in SOFC Cathodes

Rainer Küngas, Ju‐Sik Kim, John M. Vohs and Raymond J. Gorte

Journal of the American Ceramic Society, 2011, 94, 2220
DOI: 10.1111/j.1551-2916.2010.04359.x

SOFC Anodes Based on Infiltration of La[sub 0.3]Sr[sub 0.7]TiO[sub 3]

Shiwoo Lee, Guntae Kim, J. M. Vohs and R. J. Gorte

J. Electrochem. Soc., 2008, 155, B1179
DOI: 10.1149/1.2976775

Modeling of anode-supported SOFCs with samaria doped-ceria electrolytes operating at 500–600 °C

Daan Cui, Qiang Liu and Fanglin Chen

Journal of Power Sources, 2010, 195, 4160
DOI: 10.1016/j.jpowsour.2010.01.013

Fundamentals of electro- and thermochemistry in the anode of solid-oxide fuel cells with hydrocarbon and syngas fuels

J. Hanna, W.Y. Lee, Y. Shi and A.F. Ghoniem

Progress in Energy and Combustion Science, 2014, 40, 74
DOI: 10.1016/j.pecs.2013.10.001

Ceria catalyst for inert-substrate-supported tubular solid oxide fuel cells running on methane fuel

Kai Zhao, Bok-Hee Kim, Yanhai Du, Qing Xu and Byung-Guk Ahn

Journal of Power Sources, 2016, 314, 10
DOI: 10.1016/j.jpowsour.2016.02.079

A hierarchical porous microstructure for improving long-term stability of Ni1-xCux/SDC anode-supported IT-SOFCs fueled with dry methane

Zhicheng Wang, Siqi Wang, Shiyan Jiao, Wenjian Weng, Kui Cheng, Bin Qian, Hailin Yu and Yimin Chao

Journal of Alloys and Compounds, 2017, 702, 186
DOI: 10.1016/j.jallcom.2017.01.212

High Surface Area SOFC Electrode Materials Prepared at Traditional Sintering Temperatures

S. P. Muhoza, T. E. Barrett, M. A. Cottam, S. E. Soll, M. D. Yuce, V. S. Prathab, S. K. Hambright, M. Rezazad, O. Racchi and M. D. Gross

J. Electrochem. Soc., 2018, 165, F46
DOI: 10.1149/2.0381802jes

Synergistically Promoting Coking Resistance of a La0.4Sr0.4Ti0.85Ni0.15O3−δ Anode by Ru-Doping-Induced Active Twin Defects and Highly Dispersed Ni Nanoparticles

Yawei Tang, Haocong Wang, Ruichen Wang, Qingshi Liu, Zixiang Yan, Lanlan Xu and Xiaojuan Liu

ACS Appl. Mater. Interfaces, 2022, 14, 44002
DOI: 10.1021/acsami.2c15337

Renewable syngas & hydrogen synthesis via steam reforming of glycerol over ceria-mediated exsolved metal nano catalysts

Ahmed Umar, Dragos Neagu and John T.S. Irvine

International Journal of Hydrogen Energy, 2023, 48, 27137
DOI: 10.1016/j.ijhydene.2023.03.385

Electrochemical performance of plasma sprayed Cu–Co–SDC mono-layer and Cu–Co–SDC/Cu–YSZ bi-layered anodes manufactured from coarse and fine feedstock powders

Nir Light and Olivera Kesler

Journal of Power Sources, 2013, 232, 389
DOI: 10.1016/j.jpowsour.2012.09.112

CH4 internal dry reforming over a Ni/YSZ/ScSZ anode catalyst in a SOFC: A transient kinetic study

Wenbin Yin and Steven S.C. Chuang

Catalysis Communications, 2017, 102, 62
DOI: 10.1016/j.catcom.2017.08.027

Investigation of a Layered Perovskite for IT-SOFC Cathodes: B-Site Fe-Doped YBa0.5Sr0.5Co2-xFexO5+δ

Sangwook Joo, Junyoung Kim, Jeeyoung Shin, Tak-Hyoung Lim and Guntae Kim

J. Electrochem. Soc., 2016, 163, F1489
DOI: 10.1149/2.0371614jes

PEALD Ru-decorated Ni-SDC cermet anode for utilizing methane fuel in low-temperature SOFCs

Dohyun Go, Taeyoung Kim, Haoyu Li, ThomasJae Garcia, Byung Chan Yang, Turgut M. Gür, Min Hwan Lee and Jihwan An

Surfaces and Interfaces, 2024, 44, 103657
DOI: 10.1016/j.surfin.2023.103657

Evaluation of Ni/SDC as anode material for dry CH4 fueled Solid Oxide Fuel Cells

Zhiming Wang, Yongdan Li and Johannes W. Schwank

Journal of Power Sources, 2014, 248, 239
DOI: 10.1016/j.jpowsour.2013.09.043

Sm0.5Ba0.5MnO3-δ anode for solid oxide fuel cells with hydrogen and methanol as fuels

Nianjun Hou, Ping Li, Tianmu Lv, Tongtong Yao, Xueli Yao, Tian Gan, Lijun Fan, Pengzhi Mao, Yicheng Zhao and Yongdan Li

Catalysis Today, 2017, 298, 33
DOI: 10.1016/j.cattod.2017.06.034

Scandium Doping Effect on a Layered Perovskite Cathode for Low-Temperature Solid Oxide Fuel Cells (LT-SOFCs)

Donghwi Jeong, Junyoung Kim, Ohhun Kwon, Chaehyun Lim, Sivaprakash Sengodan, Jeeyoung Shin and Guntae Kim

Applied Sciences, 2018, 8, 2217
DOI: 10.3390/app8112217

Electrochemical performance of a copper-impregnated Ni–Ce0.8Sm0.2O1.9 anode running on methane

Kai Zhao, Kang-Sik Lee, Min Chen, Bok-Hee Kim, Qing Xu and Byung-Guk Ahn

International Journal of Hydrogen Energy, 2013, 38, 3750
DOI: 10.1016/j.ijhydene.2013.01.036

Multifunctional macroporous solid oxide fuel cell anode with active nanosized ceramic electrocatalyst

Selma Aparecida Venâncio, Bernardo Jordão Moreira Sarruf, George Gilberto Gomes and Paulo Emílio Valadão de Miranda

International Journal of Hydrogen Energy, 2020, 45, 5501
DOI: 10.1016/j.ijhydene.2019.06.006

Ni modified ceramic anodes for solid oxide fuel cells

Guoliang Xiao, Chao Jin, Qiang Liu, Andreas Heyden and Fanglin Chen

Journal of Power Sources, 2012, 201, 43
DOI: 10.1016/j.jpowsour.2011.10.103

Advancements in the study of carbon deposition behavior during the metallurgical high-reductive potential gas reforming and heating processes

Xingjian Deng, Lianda Zhao, Tian Gao, Qingguo Xue, Jingsong Wang and Haibin Zuo

Fuel Processing Technology, 2024, 257, 108087
DOI: 10.1016/j.fuproc.2024.108087

Direct Electrochemical Oxidation of Hydrocarbon Fuels on SOFCs: Improved Carbon Tolerance of Ni Alloy Anodes

Eranda Nikolla, Johannes Schwank and Suljo Linic

J. Electrochem. Soc., 2009, 156, B1312
DOI: 10.1149/1.3208060

Investigation of the Structural and Catalytic Requirements for High-Performance SOFC Anodes Formed by Infiltration of LSCM

G. Kim, S. Lee, J. Y. Shin, G. Corre, J. T. S. Irvine, J. M. Vohs and R. J. Gorte

Electrochem. Solid-State Lett., 2009, 12, B48
DOI: 10.1149/1.3065971

Doped CeO2–LaFeO3 Composite Oxide as an Active Anode for Direct Hydrocarbon-Type Solid Oxide Fuel Cells

Tae Ho Shin, Shintaro Ida and Tatsumi Ishihara

J. Am. Chem. Soc., 2011, 133, 19399
DOI: 10.1021/ja206278f

A Career in Catalysis: Raymond J. Gorte

Omar A. Abdelrahman, Eric I. Altman, Matteo Cargnello, Paolo Fornasiero, Guntae Kim, Rainer Küngas, Jing Luo, Steven McIntosh, Tae-Sik Oh, Tzia Ming Onn and John M. Vohs

ACS Catal., 2024, 14, 12895
DOI: 10.1021/acscatal.4c02998

Effects of H2S and H2O on carbon deposition over La0.4Sr0.5Ba0.1TiO3/YSZ perovskite anodes in methane fueled SOFCs

Shao-Hua Cui, Jian-Hui Li, Abhimanyu Jayakumar, Jing-Li Luo, Karl T. Chuang, Josephine M. Hill and Li-Jie Qiao

Journal of Power Sources, 2014, 250, 134
DOI: 10.1016/j.jpowsour.2013.10.124

Exsolved materials for CO2 reduction in high-temperature electrolysis cells

Min Xu, Ran Cao, Han Qin, Nuoxi Zhang, Wenle Yan, Liming Liu, John T.S. Irvine and Di Chen

Materials Reports: Energy, 2023, 3, 100198
DOI: 10.1016/j.matre.2023.100198

Tungsten carbide-based anodes for solid oxide fuel cells: Preparation, performance and challenges

Alireza Torabi and Thomas H. Etsell

Journal of Power Sources, 2012, 212, 47
DOI: 10.1016/j.jpowsour.2012.03.102

Alternative hydrogen carriers for button-cell oxide-ion solid oxide fuel cells: A critical review outlining current status, challenges, and prospects

Girolama Airò Farulla, Luigi Gurreri, Manfredi Picciotto Maniscalco and Marco Ferraro

International Journal of Hydrogen Energy, 2026, 218, 153714
DOI: 10.1016/j.ijhydene.2026.153714

Advances in methane conversion processes

Bingwen Wang, Sandra Albarracín-Suazo, Yomaira Pagán-Torres and Eranda Nikolla

Catalysis Today, 2017, 285, 147
DOI: 10.1016/j.cattod.2017.01.023

Fabrication and co-sintering of thin tubular IT-SOFC with Cu2O–GDC cermet supporting anode and Li2O-doped GDC electrolyte

Andrea Azzolini, John Downs and Vincenzo M. Sglavo

Journal of the European Ceramic Society, 2015, 35, 2119
DOI: 10.1016/j.jeurceramsoc.2015.01.023

Evaluation of electrochemical performance and carbon deposition behaviour of Sn, Ag, Cu, Fe-doped Ni/ScCeSZ anode solid oxide fuel cells operated with simulated biogas

Zeyu Jiang, Bernardo Jordão Moreira Sarruf, Ahmad El-kharouf, Wenfeng Zhan, Zhenxing Liang and Robert Steinberger-Wilckens

Chemical Engineering Journal, 2025, 505, 159392
DOI: 10.1016/j.cej.2025.159392

A-Site Ordered Double Perovskite with in Situ Exsolved Core–Shell Nanoparticles as Anode for Solid Oxide Fuel Cells

Nianjun Hou, Tongtong Yao, Ping Li, Xueli Yao, Tian Gan, Lijun Fan, Jun Wang, Xiaojing Zhi, Yicheng Zhao and Yongdan Li

ACS Appl. Mater. Interfaces, 2019, 11, 6995
DOI: 10.1021/acsami.8b19928

Reversible solid-oxide cells for clean and sustainable energy

M B Mogensen, M Chen, H L Frandsen, C Graves, J B Hansen, K V Hansen, A Hauch, T Jacobsen, S H Jensen, T L Skafte and X Sun

Clean Energy, 2019, 3, 175
DOI: 10.1093/ce/zkz023

Highly efficient recovery and purification of scandium from the waste sulfuric acid solution from titanium dioxide production by solvent extraction

Yedan Chen, Shuyi Ma, Shunyan Ning, Yilai Zhong, Xinpeng Wang, Toyohisa Fujita and Yuezhou Wei

Journal of Environmental Chemical Engineering, 2021, 9, 106226
DOI: 10.1016/j.jece.2021.106226

Electrochemical Behavior of (Fe,Ni)Ox-Based Anodes for Solid-Oxide Fuel Cells in Methane-Containing Atmospheres

V. A. Kolotygin, A. I. Ivanov, D. V. Matveev, S. I. Bredikhin and V. V. Kharton

Russ J Electrochem, 2020, 56, 147
DOI: 10.1134/S102319352002007X