Issue 12, 2015

CO2 and ambient air in metal–oxygen batteries: steps towards reality

Abstract

Metal–air batteries, especially lithium and sodium air technologies, have attracted significant research attention in the past decade. The high theoretical specific energy (3500 Wh kg−1 for Li–O2 and 1600 Wh kg−1 for Na–O2) and moderate equilibrium potential (2.96 V for Li–O2 and 2.3 V for Na–O2) make these chemistries attractive energy storage platforms for transportation, autonomous aircraft, and emergent robotics technologies. The term metal–air battery, however, hardly describes the cell design under most active investigation by researchers; in most studies, O2 is used in place of air as the active material in the battery cathode. This change, designed to eliminate the formation of electrochemically stable metal hydroxide and metal carbonate discharge products when CO2 and moisture present in ambient air react with metal ions in the cathode, introduces significant new complications for practical metal–air battery design and operation that largely defeat the competitive advantages of this storage technology. Recent work has shown that when a mixture of O2 and CO2 is used as the active material in the cathode, it is possible to recharge a metal–O2/CO2 cell provided steps are taken to prevent electrolyte decomposition during recharge. In this highlight, we critically review the literature on metal–O2/CO2 cells, focusing on how the presence of CO2 in the active cathode material changes electrochemistry at the cathode and rechargeability of the cells. We also assess the progress and future prospects for metal–air battery technologies involving ambient air as the cathode gas.

Graphical abstract: CO2 and ambient air in metal–oxygen batteries: steps towards reality

Article information

Article type
Highlight
Submitted
02 sep 2015
Accepted
22 sep 2015
First published
05 okt 2015

Inorg. Chem. Front., 2015,2, 1070-1079

CO2 and ambient air in metal–oxygen batteries: steps towards reality

S. Xu, S. Lau and L. A. Archer, Inorg. Chem. Front., 2015, 2, 1070 DOI: 10.1039/C5QI00169B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements