Issue 7, 2024

Nickel polyelectrolytes as hole transporting materials for organic and perovskite solar cell applications

Abstract

Engineering interfacial materials for use between the active layer and the electrodes in organic and perovskite solar cells is one of the most effective ways to increase device efficiency. Despite decades of development, new materials continue to emerge offering improved performance and streamlined fabrication of devices. Here, a hole transport layer (HTL) for organic and perovskite solar cells combining poly(styrene sulfonate) (PSS) and nickel (Ni2+) is presented. P-type carriers and p-doping at the anode are stabilized by the PSS backbone's negatively charged state. The impact of ionic moieties on the electronic band structure and characteristics of organic and perovskite solar cells must be understood. The combination of Nickel(II): poly(styrene sulfonate) (Ni:PSS) and poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) can improve efficiency to 15.67% (perovskite solar cell) and 16.90% (organic solar cell) over traditional Ni:PSS and PEDOT:PSS. Ultraviolet photoelectron spectroscopic observations at HTL/donor interfaces indicate energy level alignment, which is the cause of various changes in device performance. Low ionization potential (IP) and hole injection barrier (ϕh) are essential at the HTL/donor interface for effective charge extraction in organic and perovskite solar cells.

Graphical abstract: Nickel polyelectrolytes as hole transporting materials for organic and perovskite solar cell applications

Supplementary files

Article information

Article type
Paper
Submitted
05 feb 2024
Accepted
23 mei 2024
First published
27 mei 2024
This article is Open Access
Creative Commons BY-NC license

Energy Adv., 2024,3, 1553-1561

Nickel polyelectrolytes as hole transporting materials for organic and perovskite solar cell applications

J. H. Lee, K. A. Khawaja, F. Shoukat, Y. Khan, D. H. Kim, S. Cho, B. Walker and J. H. Seo, Energy Adv., 2024, 3, 1553 DOI: 10.1039/D4YA00081A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements