Issue 5, 2024

A direct comparison between ring-opening copolymerization and polycondensation to produce polyesters using poly(ethylene succinate) as an example

Abstract

Compared with the polycondensation of diacids (or diesters) with diols to produce polyesters, the ring-opening copolymerization (ROCOP) of epoxides and anhydrides is regarded as a promising alternative strategy because of its atom-economical characteristics, diverse monomer combinations, and facile tuning of properties. In this regard, a direct comparison of the two approaches is crucially important to better understand their pros and cons. In this article, by taking poly(ethylene succinate) (PES) as a template polyester, we performed a direct evaluation of ROCOP and polycondensation methods. For ROCOP, a series of mononuclear organoboron catalysts was utilized for ROCOP of ethylene oxide with succinic anhydride with high activities up to 608 h−1 at 150 °C within 0.5 h, affording PES with a low molecular weight of 3.7 kDa, while polycondensation of ethylene glycol and succinic acid produced PES with a high molecular weight of 28.1 kDa using antimony triacetate as the catalyst under vacuum at 200–280 °C within 11 h. In addition to the experimental results, the monomer preprocessing, polymerization conditions, post-processing, and total cost of the two strategies were roughly compared. On the basis of the comparison results, we cautiously make the point that ROCOP can hardly replace the polycondensation in the conventional polyester industry, but should be viewed as a complementary polymerization process that may find applications in preparing high value-added products (e.g., optically active polymers and block copolymers).

Graphical abstract: A direct comparison between ring-opening copolymerization and polycondensation to produce polyesters using poly(ethylene succinate) as an example

Supplementary files

Article information

Article type
Paper
Submitted
30 nov 2023
Accepted
29 dec 2023
First published
30 dec 2023

Polym. Chem., 2024,15, 412-421

A direct comparison between ring-opening copolymerization and polycondensation to produce polyesters using poly(ethylene succinate) as an example

R. Xie, G. Yang, Y. Zhang, C. Lu, W. Li, J. Wang and G. Wu, Polym. Chem., 2024, 15, 412 DOI: 10.1039/D3PY01314F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements