Issue 14, 2019

Ultra-high energy storage performance with mitigated polarization saturation in lead-free relaxors

Abstract

Relaxor ferroelectric ceramics have attracted much attention for storing the electricity generated from clean and renewable energy sources due to their high permittivity and near-zero remnant polarization. The polarization of many relaxor based ceramics tends to saturate at high electric fields, however, which limits their energy storage performance. In this study, a lead-free Sn-modified (Na0.5Bi0.5)TiO3–SrTiO3 system is investigated, where mitigated polarization saturation is observed with the addition of Sn4+, as a result of the different electronic configurations between d10 Sn4+ and d0 Ti4+. As expected, high energy density of 3.4 J cm−3 and energy efficiency of 90% are simultaneously achieved in (Na0.25Bi0.25Sr0.5)(Ti0.8Sn0.2)O3 ceramic. In addition, the ceramic exhibits good thermal stability, with the energy storage property variations below 5% over the temperature range of −20 °C to 150 °C, and satisfactory cycling stability with a variation of less than 8% over 105 cycles. All these merits demonstrate that the (Na0.25Bi0.25Sr0.5)(Ti0.8Sn0.2)O3 ceramic has great potential for high power energy storage applications.

Graphical abstract: Ultra-high energy storage performance with mitigated polarization saturation in lead-free relaxors

Supplementary files

Article information

Article type
Paper
Submitted
30 jan 2019
Accepted
14 mrt 2019
First published
15 mrt 2019

J. Mater. Chem. A, 2019,7, 8573-8580

Ultra-high energy storage performance with mitigated polarization saturation in lead-free relaxors

L. Yang, X. Kong, Z. Cheng and S. Zhang, J. Mater. Chem. A, 2019, 7, 8573 DOI: 10.1039/C9TA01165J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements