Issue 7, 2019

Controllable reduction of graphene oxide by electron-beam irradiation

Abstract

The oxygen content of graphene oxide (GO) is directly related to its physical and chemical properties, such as hydrophilicity, suspension stability, adsorption, and ion-sieving ability of GO membranes. Here, a series of reduced GO (rGO) with C/O atomic ratios from 1.6 to 4.8 were prepared conveniently by electron-beam irradiation (EBI) with irradiation-dose control. Moreover, a single oxygen-containing group, i.e., epoxy or carbonyl, could be retained mainly in the rGO. The interlayer spacing of rGO could be changed from 9.6 Å to 7.4 Å through control of the oxygen content. The prepared rGO exhibited an excellent adsorption effect on Pb(II) ions, and the max adsorption capacity reached 194.76 mg g−1 for rGO with a low irradiation dose (5 kGy), which showed that the ratio of oxygen-containing groups is important for improving the adsorption of rGO in aqueous solution. These results indicated that highly efficient, environmentally friendly, and advanced EBI technology has good potential prospects for use in the large-scale production of rGO with precise control of the oxygen content.

Graphical abstract: Controllable reduction of graphene oxide by electron-beam irradiation

Article information

Article type
Paper
Submitted
13 aug 2018
Accepted
14 jan 2019
First published
25 jan 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 3597-3604

Controllable reduction of graphene oxide by electron-beam irradiation

Y. Yang, L. Chen, D. Li, R. Yi, J. Mo, M. Wu and G. Xu, RSC Adv., 2019, 9, 3597 DOI: 10.1039/C8RA06797J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements