Issue 8, 2017

Self-standing Bi2O3 nanoparticles/carbon nanofiber hybrid films as a binder-free anode for flexible sodium-ion batteries

Abstract

A flexible binder-free film composed of bismuth oxide nanoparticles embedded in carbon nanofibers (Bi2O3/C) was prepared by a feasible electrospinning method and directly used as a sodium ion battery (SIB) anode. As a binder-free and flexible anode for SIBs, Bi2O3/C delivers a high reversible capacity of 430 mA h g−1 after 200 cycles at a current density of 100 mA g−1 and an exceptional rate capability of 230 mA h g−1 at 3200 mA g−1. It has a stable capacity of 252 mA h g−1 after 50 cycles at 400 mA g−1 in a Na-ion full cell device. The high capacity, good cyclability and rate capability are attributed to synergistic effects of the uniform distribution of ultra-small Bi2O3 nanoparticles (≈10 nm) in the carbon nanofibers and the conducting framework of 3-D interconnected carbon nanofibers, which can effectively alleviate the volume expansion during sodiation/desodiation processes and maintain the high electrical conductivity throughout the electrode. This self-standing flexible Bi2O3/C nanocomposite electrode may hold great promise for high-performance SIBs.

Graphical abstract: Self-standing Bi2O3 nanoparticles/carbon nanofiber hybrid films as a binder-free anode for flexible sodium-ion batteries

Supplementary files

Article information

Article type
Research Article
Submitted
19 mrt 2017
Accepted
11 apr 2017
First published
12 apr 2017

Mater. Chem. Front., 2017,1, 1615-1621

Self-standing Bi2O3 nanoparticles/carbon nanofiber hybrid films as a binder-free anode for flexible sodium-ion batteries

H. Yin, M. Cao, X. Yu, H. Zhao, Y. Shen, C. Li and M. Zhu, Mater. Chem. Front., 2017, 1, 1615 DOI: 10.1039/C7QM00128B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements