Issue 31, 2016

On the chemical stability of post-lithiated garnet Al-stabilized Li7La3Zr2O12 solid state electrolyte thin films

Abstract

Garnet-based Al-doped Li7La3Zr2O12 has the potential to be used as a solid state electrolyte for future lithium microbattery architectures, due to its relatively high Li+ conductivity and stability against Li. Through this work, a model experiment is presented in which the effect of post-lithiation on phase formation and chemical stability is studied for pulsed laser deposited Al-doped Li7La3Zr2O12 thin films on MgO substrates. We report the implications of the newly suggested post-lithiation route for films with thicknesses between 90 and 380 nm. The phase changes from cubic, to a mix of cubic and tetragonal Li7La3Zr2O12, to a cubic Li7La3Zr2O12 and La2Zr2O7 containing film is accompanied by a reduction in the degree of de-wetting as the thickness increases. This study reveals that the thicker, dense, and continuous films remain predominantly in a mixed phase containing cubic Li7La3Zr2O12 and the lithium free La2Zr2O7 phase whereas the thinner, de-wetted films exhibit improved lithium incorporation resulting in the absence of the lithium free phase. For tuning the electrical conductivity and effective use of these structures in future batteries, understanding this material system is of great importance as the chemical stability of the cubic Li7La3Zr2O12 phase in the thin film system will control its effective use. We report a conductivity of 1.2 × 10−3 S cm−1 at 325 °C for a 380 nm thick solid state electrolyte film on MgO for potential operation in future all solid state battery assemblies.

Graphical abstract: On the chemical stability of post-lithiated garnet Al-stabilized Li7La3Zr2O12 solid state electrolyte thin films

Supplementary files

Article information

Article type
Paper
Submitted
23 မေ 2016
Accepted
18 ဇူ 2016
First published
20 ဇူ 2016

Nanoscale, 2016,8, 14746-14753

On the chemical stability of post-lithiated garnet Al-stabilized Li7La3Zr2O12 solid state electrolyte thin films

M. Rawlence, I. Garbayo, S. Buecheler and J. L. M. Rupp, Nanoscale, 2016, 8, 14746 DOI: 10.1039/C6NR04162K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements