Issue 20, 2023

Selective placement of modifiers on hematite thin films for solar water splitting

Abstract

The design of nanostructured materials for photoelectrochemical water splitting relies on a detailed understanding of the reactional bottlenecks. For hematite, a model system for photoanodes, the challenges concern poor charge transfer and separation, carrier recombination rate, and sluggish water oxidation kinetics. Several methods have been proposed to address each individually, with complex multi-step processes offered as solutions to improve overall performance. Here, we introduce a single polymeric precursor solution that enables the design of hematite (α-Fe2O3) with synergistic bulk and interfacial engineering using Ga3+, Hf4+ and NiFeOx. The solution causes Ga3+ to dope hematite lattice to reduce polaronic effects, while simultaneously induces Hf4+ enrichment at both surface and grain boundaries, improving charge separation and reducing recombination. Hf4+ also led to a refined microstructure derived from interface stabilization, which associated with Ga3+ bulk doping and NiFeOx electrodeposition resulted in a thin film with 65% of overall photoelectrode efficiency. As a consequence, the modified hematite photoanode (176 nm-thick) delivered a water oxidation photocurrent of 2.30 mA cm−2 in contrast to 0.37 mA cm−2 for the pristine system measured at 1.23 V against hydrogen reversible electrode (RHE). The results suggest the simplicity of this new polymeric solution may offer a cost-effective, scalable and versatile alternative for multiple chemical modifications in oxides beyond hematite.

Graphical abstract: Selective placement of modifiers on hematite thin films for solar water splitting

Supplementary files

Article information

Article type
Paper
Submitted
02 ဩ 2023
Accepted
07 စက် 2023
First published
07 စက် 2023

Sustainable Energy Fuels, 2023,7, 5005-5017

Selective placement of modifiers on hematite thin films for solar water splitting

F. A. Pires, G. T. dos Santos, J. Bettini, C. A. R. Costa, R. V. Gonçalves, R. H. R. Castro and F. L. Souza, Sustainable Energy Fuels, 2023, 7, 5005 DOI: 10.1039/D3SE00998J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements