Issue 9, 2023

In vivo evaluation of compliance mismatch on intimal hyperplasia formation in small diameter vascular grafts

Abstract

Small diameter synthetic vascular grafts have high failure rate due to the thrombosis and intimal hyperplasia formation. Compliance mismatch between the synthetic graft and native artery has been speculated to be one of the main causes of intimal hyperplasia. However, changing the compliance of synthetic materials without altering material chemistry remains a challenge. Here, we used poly(vinyl alcohol) (PVA) hydrogel as a graft material due to its biocompatibility and tunable mechanical properties to investigate the role of graft compliance in the development of intimal hyperplasia and in vivo patency. Two groups of PVA small diameter grafts with low compliance and high compliance were fabricated by dip casting method and implanted in a rabbit carotid artery end-to-side anastomosis model for 4 weeks. We demonstrated that the grafts with compliance that more closely matched with rabbit carotid artery had lower anastomotic intimal hyperplasia formation and higher graft patency compared to low compliance grafts. Overall, this study suggested that reducing the compliance mismatch between the native artery and vascular grafts is beneficial for reducing intimal hyperplasia formation.

Graphical abstract: In vivo evaluation of compliance mismatch on intimal hyperplasia formation in small diameter vascular grafts

Supplementary files

Article information

Article type
Paper
Submitted
01 ဖေ 2023
Accepted
04 မတ် 2023
First published
08 မတ် 2023

Biomater. Sci., 2023,11, 3297-3307

In vivo evaluation of compliance mismatch on intimal hyperplasia formation in small diameter vascular grafts

Y. Yao, G. Pohan, M. F. A. Cutiongco, Y. Jeong, J. Kunihiro, A. M. Zaw, D. David, H. Shangguan, A. C. H. Yu and E. K. F. Yim, Biomater. Sci., 2023, 11, 3297 DOI: 10.1039/D3BM00167A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements