Issue 48, 2021

The crystallization morphology and process of stereocomplex crystallites of polylactide under CO2: the effect of H-bonding and chain diffusion

Abstract

CO2 could affect the crystallization behavior of polylactide (PLA) homo-crystallites (HC) due to its influence on the chain mobility, while the effect of CO2 on the crystallization of stereocomplex crystallites (SC) is still unknown. In this manuscript, the crystallization process of SC under CO2 was in situ observed by high-pressure POM, and the crystal morphology was further studied by AFM and CLSM. During growth, the nucleation and the branching of lamellae for SC was limited by CO2 at higher temperatures due to the plasticization effect, and fewer crystals with tangential lamellae were shown. The crystal morphology exhibited pressure dependence. At lower pressure, many “grooves” were shown on the SC crystal surface and the crystals became more perfect with increasing pressure, while the depth of “grooves” decreased gradually and the crystals became imperfect under higher pressure. Compared with SC, the HC showed deeper “grooves” and perfect crystals with increasing pressure monotonously. It was inferred that the weakened H-bonding and the increasing diffusion of molecular chains at high temperature and pressure caused the different SC and HC crystallization mechanisms under CO2.

Graphical abstract: The crystallization morphology and process of stereocomplex crystallites of polylactide under CO2: the effect of H-bonding and chain diffusion

Article information

Article type
Paper
Submitted
18 ဩ 2021
Accepted
28 အောက် 2021
First published
19 နို 2021

CrystEngComm, 2021,23, 8601-8611

The crystallization morphology and process of stereocomplex crystallites of polylactide under CO2: the effect of H-bonding and chain diffusion

S. Li, X. Liao, F. Liu and G. Li, CrystEngComm, 2021, 23, 8601 DOI: 10.1039/D1CE01109J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements