Issue 39, 2020

Tungsten nitride-coated graphene fibers for high-performance wearable supercapacitors

Abstract

Graphene-fiber (GF) supercapacitors have attracted significant research attention in the field of wearable devices. However, there is still a need for active materials with high energy density. Transition Metal Nitrides (TMNs) are promising candidates for this purpose compared with conventional Transition Metal Oxides (TMOs) or conducting polymers (CPs) owing to their higher electrical conductivity, stability and relevant electrochemical properties. We have successfully integrated Tungsten Nitride (WN) with reduced graphene oxide fibers (rGOF) and developed high-performance hybrid fiber (WN–rGOF) supercapacitors. These hybrid supercapacitors attained a high capacitance of 16.29 F cm−3 at 0.05 A cm−3 and an energy density of 1.448 mW h cm−3, which is 7.5 and 1.75 times higher than those of the pure rGOF supercapacitor and the Tungsten Oxide/rGO hybrid fiber (WO3–rGOF) supercapacitor, respectively. The energy density readily increased up to 2.896 mW h cm−3 when three WN–rGOF supercapacitors were connected in series. The WN–rGOF supercapacitor also showed high capacitance retention of 84.7% after 10 000 cycles along with appreciable performance under severe mechanical deformation.

Graphical abstract: Tungsten nitride-coated graphene fibers for high-performance wearable supercapacitors

Supplementary files

Article information

Article type
Paper
Submitted
15 စက် 2020
Accepted
20 စက် 2020
First published
21 စက် 2020

Nanoscale, 2020,12, 20239-20249

Tungsten nitride-coated graphene fibers for high-performance wearable supercapacitors

A. Salman, S. Padmajan Sasikala, I. H. Kim, J. T. Kim, G. S. Lee, J. G. Kim and S. O. Kim, Nanoscale, 2020, 12, 20239 DOI: 10.1039/D0NR06636B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements