Issue 9, 2020

Extreme ultraviolet plasma spectroscopy of a pseudospark XUV source

Abstract

The development of extreme ultraviolet (XUV) sources for tabletop operation has enabled a range of new applications in nano-structuring and spectroscopy. The quantitative characterization of the XUV emission obtained from a pseudospark hollow cathode lamp (HCL) was carried out with a self-developed flat-field spectrometer for the λ < 25 nm spectral range. The wavelength calibration in XUV spectroscopy is challenging, because of the poor grating resolving power for ultrashort wavelengths, which propagate only in a vacuum. Among three alternative methods, flat-field calibration showed the highest accuracy over a wider range. The plasma parameters were extracted from the calibrated spectra. The electron temperatures of the discharged N2, O2 and Ar gases in the HCL are consistent in the range of 17–22 eV. The intensity of the XUV radiation decreased with the increase of working gas pressure, due to self-absorption. A self-developed one-hole HCL exhibited three orders of magnitude higher electron density (Ne = 1.5 × 1019 cm−3) compared to the state-of-the-art three-hole HCL design (Ne = 1016 cm−3), as confirmed by means of collisional-radiative modelling. These results, along with a comparable spectral fingerprint, suggest more extensive and homogeneous excitation across the entire plasma body in the own design.

Graphical abstract: Extreme ultraviolet plasma spectroscopy of a pseudospark XUV source

Article information

Article type
Paper
Submitted
06 မေ 2020
Accepted
16 ဇူ 2020
First published
05 ဩ 2020

J. Anal. At. Spectrom., 2020,35, 2011-2022

Extreme ultraviolet plasma spectroscopy of a pseudospark XUV source

D. Qu and D. Bleiner, J. Anal. At. Spectrom., 2020, 35, 2011 DOI: 10.1039/D0JA00215A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements