Issue 3, 2019

Kinetic and experimental study on the reaction of 3,7-dinitro-1,3,5,7-tetraazabicyclo[3.3.1]nonane in nitric acid

Abstract

The nitrolysis of 3,7-dinitro-1,3,5,7-tetraazabicyclo[3.3.1]nonane (DPT) to prepare 1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane (HMX) in fuming HNO3 between −8 °C to −36 °C was tracked by 1H-NMR. It is found that DPT converted to 1-nitroso-3,5,7-trinitro-1,3,5,7-tetraazacyclooctane (MNX) immediately at the end of the feeding course; MNX was then gradually nitrolyzed to HMX. The latter reaction followed a pseudo-first order kinetics, and the selectivity of HMX was almost unaffected with the change in reaction temperature based on the kinetics study. The effects of water and N2O4 on this reaction were investigated and the results indicated that a small amount of water and N2O4 was beneficial to the generation of the intermediate product MNX. On the contrary, the presence of water and N2O4 hindered the conversion of MNX to HMX. Nitrosonium in the reaction system has two sources: one is from the nitrogen oxides such as N2O4 in fuming nitric acid; the other is from the redox reaction between nitric acid and formaldehyde, which was promoted by the H2O in fuming nitric acid. Based on the these results, the overall yield of the stepwise method for preparing HMX was up to 82.7% under the optimized reaction conditions.

Graphical abstract: Kinetic and experimental study on the reaction of 3,7-dinitro-1,3,5,7-tetraazabicyclo[3.3.1]nonane in nitric acid

Supplementary files

Article information

Article type
Paper
Submitted
13 နို 2018
Accepted
02 ဇန် 2019
First published
03 ဇန် 2019

React. Chem. Eng., 2019,4, 610-617

Kinetic and experimental study on the reaction of 3,7-dinitro-1,3,5,7-tetraazabicyclo[3.3.1]nonane in nitric acid

Y. Zhang, Z. Xu, L. Zhang, Y. He and J. Luo, React. Chem. Eng., 2019, 4, 610 DOI: 10.1039/C8RE00299A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements