Issue 4, 2018
From the journal:

Materials Chemistry Frontiers

A carbon–oxygen-bridged hexacyclic ladder-type building block for low-bandgap nonfullerene acceptors†

Ting Li,‡ab   Honghong Zhang,‡b   Zuo Xiao, ORCID logo b   Jeromy J. Rech, ORCID logo c   Helin Niu,*a   Wei You ORCID logo *c  and  Liming Ding ORCID logo *b  

* Corresponding authors

a School of Chemistry & Chemical Engineering, Anhui Province Key Laboratory of Chemistry for Inorganic/Organic Hybrid Functionalized Materials, Anhui University, Hefei 230601, China
E-mail: niuhelin@ahu.edu.cn

b Center for Excellence in Nanoscience (CAS), Key Laboratory of Nanosystem and Hierarchical Fabrication (CAS), National Center for Nanoscience and Technology, Beijing 100190, China
E-mail: ding@nanoctr.cn

c Department of Chemistry, University of North Carolina at Chapel Hill, NC 27599, USA
E-mail: wyou@unc.edu

Abstract

A hexacyclic carbon–oxygen-bridged ladder-type unit, COi6, was developed. Three nonfullerene acceptors (COi6IC, COi6FIC and COi6DFIC) based on COi6 were prepared. They present low optical bandgaps of 1.31–1.37 eV and strong absorbance in the near-infrared region. A 9.12% power conversion efficiency was achieved from the solar cells based on COi6FIC and a wide-bandgap copolymer donor (FTAZ).

Graphical abstract: A carbon–oxygen-bridged hexacyclic ladder-type building block for low-bandgap nonfullerene acceptors

About
Cited by
Related
Download options Please wait...

Supplementary files

Article information

DOI
https://doi.org/10.1039/C8QM00004B
Article type
Research Article
Submitted
05 ဇန် 2018
Accepted
24 ဇန် 2018
First published
26 ဇန် 2018

Mater. Chem. Front., 2018,2, 700-703

Permissions

Request permissions

A carbon–oxygen-bridged hexacyclic ladder-type building block for low-bandgap nonfullerene acceptors

T. Li, H. Zhang, Z. Xiao, J. J. Rech, H. Niu, W. You and L. Ding, Mater. Chem. Front., 2018, 2, 700 DOI: 10.1039/C8QM00004B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements