Issue 5, 2018

Surface modification of a hole transporting layer for an efficient perovskite solar cell with an enhanced fill factor and stability

Abstract

The improvement of the quality of the hole transporting layer (HTL) plays a key role in the fabrication of highly efficient and stable perovskite solar cells (PSCs). Here, we used rubrene as a surface treatment agent on top of a spiro HTL. We found that rubrene can cover the pinholes of the spiro layer and provide an excellent contact layer for planar PSCs. Based on this modification, mobile gold ions from the metal electrode are prevented from diffusing through the HTL hindering the degradation of PSCs. The optimized device shows a maximum power conversion efficiency (PCE) of 19.87% and a 79% fill factor (FF), which are higher than the 17.98% PCE and 72% FF of the reference device. In addition, the device after modification demonstrates better stability after 100 h under continuous light illumination retaining 97% of its initial performance compared with 65% of the reference device.

Graphical abstract: Surface modification of a hole transporting layer for an efficient perovskite solar cell with an enhanced fill factor and stability

Supplementary files

Article information

Article type
Communication
Submitted
18 ဇွန် 2018
Accepted
16 ဇူ 2018
First published
17 ဇူ 2018

Mol. Syst. Des. Eng., 2018,3, 717-722

Surface modification of a hole transporting layer for an efficient perovskite solar cell with an enhanced fill factor and stability

M. M. Tavakoli, R. Tavakoli, D. Prochowicz, P. Yadav and M. Saliba, Mol. Syst. Des. Eng., 2018, 3, 717 DOI: 10.1039/C8ME00036K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements