Issue 2, 2018

Where is the nano? Analytical approaches for the detection and quantification of TiO2 engineered nanoparticles in surface waters

Abstract

Detecting and quantifying engineered nanoparticles (ENPs) in complex environmental matrices requires the distinction between natural nanoparticles (NNPs) and ENPs. The distinction of NNPs and ENPs for regulatory purposes calls for cost-efficient methods, but is hampered by similarities in intrinsic properties, such as particle composition, size, density, surface chemistry, etc. Titanium dioxide (TiO2) ENPs, for instance, are produced in very large quantities but Ti also commonly occurs naturally in nano-scale minerals. In this work, we focus on utilizing particle size and composition to identify ENPs in a system with a significant background concentration of the target metal. We have followed independent approaches involving both conventional and state-of-the-art analytical techniques to detect and quantify TiO2 ENPs released into surface waters from sunscreen products and to distinguish them from Ti-bearing NNPs. To achieve this, we applied single particle inductively coupled plasma mass spectrometry with single-element (spICPMS) and multi-element detection (time-of-flight) spICP-TOFMS, together with transmission electron microscopy (TEM), automated scanning electron microscopy (autoSEM), and bulk elemental analyses. A background concentration of Ti-bearing NPs (approximately 5 × 103 particles per ml), possibly of natural origin, was consistently observed outside the bathing season. This concentration increased by up to 40% during the bathing season. Multi-element analysis of individual particles using spICP-TOFMS revealed that Al, Fe, Mn, and Pb are often present in natural Ti-bearing NPs, but no specific multi-element signatures were detected for ENPs. Our data suggests that TiO2 ENPs enter the lake water during bathing activities, eventually agglomerating and sedimenting. We found adhesion of the TiO2 ENPs to the air–water interface for short time periods, depending on wind conditions. This study demonstrates that the use of spICP-TOFMS and spICPMS in combination with other conventional analytical techniques offers significant advantages for discriminating between NNPs and ENPs. The quantitative data produced in this work can be used as input for modeling studies or as a benchmark for analysis protocols and model validations.

Graphical abstract: Where is the nano? Analytical approaches for the detection and quantification of TiO2 engineered nanoparticles in surface waters

Supplementary files

Article information

Article type
Paper
Submitted
11 အောက် 2017
Accepted
14 ဒီ 2017
First published
14 ဒီ 2017

Environ. Sci.: Nano, 2018,5, 313-326

Where is the nano? Analytical approaches for the detection and quantification of TiO2 engineered nanoparticles in surface waters

A. Gondikas, F. von der Kammer, R. Kaegi, O. Borovinskaya, E. Neubauer, J. Navratilova, A. Praetorius, G. Cornelis and T. Hofmann, Environ. Sci.: Nano, 2018, 5, 313 DOI: 10.1039/C7EN00952F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements