Issue 9, 2017

Li2CdGeSe4 and Li2CdSnSe4: biaxial nonlinear optical materials with strong infrared second-order responses and laser-induced damage thresholds influenced by photoluminescence

Abstract

Two new biaxial, diamond-like semiconductors, Li2CdGeSe4 and Li2CdSnSe4, were prepared via high-temperature, solid-state synthesis. Single crystal X-ray diffraction and X-ray powder diffraction coupled with Rietveld refinement were used to refine the crystal structures and assess the phase purity, respectively. Both compounds adopt the lithium cobalt(II) silicate structure type. Strong second-order nonlinear optical (NLO) susceptibility, phase matchability, relatively high thermal stability, and excellent transparency deem both materials potential infrared (IR) NLO candidates. Li2CdGeSe4 and Li2CdSnSe4 display optical bandgaps of approximately 2.5 and 2.2 eV, respectively. Li2CdSnSe4 exhibits a strong, red-light emission under 1064 nm excitation, allowing the compound to release energy that accumulates by two-photon absorption under Nd:YAG laser radiation. Therefore, Li2CdSnSe4 shows a high laser-induced damage threshold (LIDT) of 0.7 GW cm−2. This special phenomenon is remarkable and may open a new avenue in searching for promising IR NLO materials with large LIDTs.

Graphical abstract: Li2CdGeSe4 and Li2CdSnSe4: biaxial nonlinear optical materials with strong infrared second-order responses and laser-induced damage thresholds influenced by photoluminescence

Supplementary files

Article information

Article type
Research Article
Submitted
04 ဇန် 2017
Accepted
09 ဇွန် 2017
First published
13 ဇွန် 2017

Inorg. Chem. Front., 2017,4, 1472-1484

Li2CdGeSe4 and Li2CdSnSe4: biaxial nonlinear optical materials with strong infrared second-order responses and laser-induced damage thresholds influenced by photoluminescence

J. Zhang, D. J. Clark, A. Weiland, S. S. Stoyko, Y. S. Kim, J. I. Jang and J. A. Aitken, Inorg. Chem. Front., 2017, 4, 1472 DOI: 10.1039/C7QI00004A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements