Issue 10, 2015

Speciation of inorganic arsenic in particulate matter by combining HPLC/ICP-MS and XANES analyses

Abstract

Inorganic arsenic species in ambient particulate matter (PM10 and PM2.5) have been determined in an urban area, in the vicinity of a metallurgical industrial plant. The developed high performance liquid chromatography inductively coupled plasma mass spectrometry (HPLC/ICP-MS) method allows monitoring of particulate As(III) and As(V)-species, with a limit of quantification of 0.34 ng m−3 As(III) and 0.23 ng m−3 As(V), respectively. Good agreement was obtained between the sum of the concentrations of As(III) and As(V) determined by HPLC/ICP-MS and the total As concentrations determined by XRF, indicating a complete extraction of the As species. During the measuring campaigns for PM10 and PM2.5, a significant conversion (oxidation) up to 54% of exogenous spiked As(III) was observed. The total amount of the spiked As(III) was well-recovered (PM10 and PM2.5 on average 108% and 101%, respectively). The extraction of the filter in combination with the sampled air matrix is likely to induce the As(III) conversion. The average measured As concentration in PM10 during a 40-day monitoring campaign (30 ng m−3) at a hot spot location is above the European target value of 6 ng m−3. The measured As concentration in PM2.5 was half the value of the measured concentration in PM10 and no relative enrichment of total As was observed in either particulate matter fractions. However, in PM10, As(V) was the main component, while in PM2.5, As(III) was the dominant species. During the monitoring campaign, the fraction of particulate As(III) varied between 19 and 61% in PM10 and a trend towards a higher fraction of As(III) with increasing concentration of total As was observed. XANES and XRD analyses were used for the identification of arsenic species in local PM sources and confirmed the presence of Ca3Sr2(AsO4)2.5(PO4)0.5(OH), As2O3 and As2O5 species.

Graphical abstract: Speciation of inorganic arsenic in particulate matter by combining HPLC/ICP-MS and XANES analyses

Article information

Article type
Paper
Submitted
27 မတ် 2015
Accepted
13 ဇူ 2015
First published
14 ဇူ 2015

J. Anal. At. Spectrom., 2015,30, 2074-2088

Author version available

Speciation of inorganic arsenic in particulate matter by combining HPLC/ICP-MS and XANES analyses

K. Tirez, C. Vanhoof, J. Peters, L. Geerts, N. Bleux, E. Adriaenssens, E. Roekens, S. Smolek, A. Maderitsch, R. Steininger, J. Göttlicher, F. Meirer, C. Streli and P. Berghmans, J. Anal. At. Spectrom., 2015, 30, 2074 DOI: 10.1039/C5JA00105F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements