Issue 5, 2015

Economic analysis of CNT lithium-ion battery manufacturing

Abstract

Development of safe, economically competitive, and environmentally responsible nano-enabled products is desirable to avoid unintended consequences. Given the environmental health and safety uncertainties associated with nanomaterials, additional precautions for exposure prevention may be required, although not regulated. Companies working with engineered nanomaterials may want to understand decision tradeoffs for the costs associated with increased levels of occupational safety and potential environmental impacts. Recent advances in nanotechnology have resulted in the development of advanced lithium nickel manganese cobalt (NMC) oxide batteries enhanced with multiwall carbon nanotubes (MWCNT). These batteries have a much greater energy density and product life than traditional lithium-ion batteries. A stochastic process-based cost model (PBCM) is developed to investigate the cost drivers for manufacture of MWCNT NMC batteries targeted for satellite and computer applications. Various levels of occupational safety protection (low, medium and high assumed) are analyzed to determine their effect on total manufacturing cost. The results show that MWCNT cost has the highest impact on total unit cost for production of satellite batteries, whereas cycle time has the highest impact on the unit cost of computer batteries. The mixing step contributes the most to the total unit cost for both satellite and computer MWCNT NMC lithium-ion batteries due to the inclusion of MWCNT costs in the mixing step. The process-based cost model developed in this work not only offers estimation of the economic drivers associated with the MWCNT NMC battery manufacturing, but also allows consideration of strategies to reduce costs. Results contribute to safer manufacturing practices for CNT lithium-ion batteries for low and high production volume applications (satellites and portable computers, respectively).

Graphical abstract: Economic analysis of CNT lithium-ion battery manufacturing

Supplementary files

Article information

Article type
Paper
Submitted
23 ဧပြီ 2015
Accepted
02 ဩ 2015
First published
04 ဩ 2015

Environ. Sci.: Nano, 2015,2, 463-476

Author version available

Economic analysis of CNT lithium-ion battery manufacturing

A. Hakimian, S. Kamarthi, S. Erbis, K. M. Abraham, T. P. Cullinane and J. A. Isaacs, Environ. Sci.: Nano, 2015, 2, 463 DOI: 10.1039/C5EN00078E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements