Issue 1, 2012

An isoindigo and dithieno[3,2-b:2′,3′-d]silole copolymer for polymer solar cells

Abstract

The copolymer of isoindigo and dithieno[3,2-b:2′,3′-d]silole, P(iI-DTS), is reported as prepared by Stille coupling to yield a soluble high molecular weight material absorbing light throughout the visible spectrum up to 800 nm. With deep HOMO and LUMO energy levels (high ionization potential and electron affinity) electrochemically measured at −5.55 and −3.95 eV respectively, this new p-type polymer enabled the fabrication of high open circuit voltage polymer solar cells when blended with fullerene derivatives. By employing solvent additives, the morphology of the devices was optimized to yield power conversion efficiencies of 4%.

Graphical abstract: An isoindigo and dithieno[3,2-b:2′,3′-d]silole copolymer for polymer solar cells

Supplementary files

Article information

Article type
Communication
Submitted
08 စက် 2011
Accepted
12 အောက် 2011
First published
27 အောက် 2011

Polym. Chem., 2012,3, 89-92

An isoindigo and dithieno[3,2-b:2′,3′-d]silole copolymer for polymer solar cells

R. Stalder, C. Grand, J. Subbiah, F. So and J. R. Reynolds, Polym. Chem., 2012, 3, 89 DOI: 10.1039/C1PY00402F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements