Issue 38, 2022

A MoS2/CuO-based hybrid p–n junction for high-performance self-powered photodetection

Abstract

Energy consumption is one of the key challenges that needs to be circumvented to develop high-performance and efficient photodetectors (PDs). In this regard, p-n heterojunctions based on van der Waals materials have attracted widespread research interest for the fabrication of next-generation PDs. Here, we report the integration of two-dimensional n-type MoS2 with p-type CuO to realize a p-n heterojunction. It is interesting to note that the device exhibits self-powered and broadband photodetection with a maximum responsivity and detectivity of 45.67 mA W−1 and 9.71 × 1011 Jones, respectively, under an illumination of 12.5 μW cm−2 light intensity. Moreover, the photoresponse of the device shows three orders of enhancement in the photocurrent at a reverse bias of −1.0 V. The device shows a responsivity and detectivity of 10.03 A W−1 and 1.8 × 1014 Jones at −1.0 V under the illumination of 12.5 μW cm−2 light intensity. This enhanced photoresponse is the result of better charge separation under the influence of built-in electric voltage and rectifying diode characteristics produced by the MoS2/CuO heterostructure device.

Graphical abstract: A MoS2/CuO-based hybrid p–n junction for high-performance self-powered photodetection

Supplementary files

Article information

Article type
Paper
Submitted
04 ဇူ 2022
Accepted
23 ဩ 2022
First published
23 ဩ 2022

J. Mater. Chem. C, 2022,10, 14159-14168

A MoS2/CuO-based hybrid p–n junction for high-performance self-powered photodetection

K. Lal Kumawat, P. Augustine, D. Kumar Singh, S. Baba Krupanidhi and K. Kar Nanda, J. Mater. Chem. C, 2022, 10, 14159 DOI: 10.1039/D2TC02812C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements