Issue 5, 2018

Solvate and protic ionic liquids from aza-crown ethers: synthesis, thermal properties, and LCST behavior

Abstract

In recent years, solvate and protic ionic liquids (ILs) have attracted much attention. We synthesized both types of ILs from alkyl aza-crown ethers (L = N-propyl-1-aza-15-crown-5 (L1) and N-C6F13C2H4-1-aza-15-crown-5 (L2)). The solvate ILs [ML][Tf2N] (M = Na+, K+) were solids (Tm = 58–68 °C), whereas the solvate ILs [ML][Tf2N] (M = Li+, Ag+) and protic ILs [HL][Tf2N] were liquids with low glass transition temperatures. The ILs containing Na ions were more crystalline and exhibited higher melting points than the other ILs. The decomposition temperatures of the protic ILs were higher than those of the solvate ILs. A protic IL with a paramagnetic anion, [HL1][FeCl4] (Tm = 70.5 °C), was also synthesized and its crystal structure was determined. The solvate ILs [NaL2][X] (X = Cl, CF3CO2, TsO, PhSO3) exhibited a lower critical solution temperature (LCST)-type behavior in water. The effects of salt addition on the LCST of L2 were also investigated. The LCST of these ILs generally increased with increasing hydrophilicity or basicity of the counter anion. This tendency, which is nearly opposite to that of ILs with quaternary onium cations, is ascribed to the amphiphilic nature of the cation. The corresponding protic ILs did not exhibit LCST behavior.

Graphical abstract: Solvate and protic ionic liquids from aza-crown ethers: synthesis, thermal properties, and LCST behavior

Supplementary files

Article information

Article type
Paper
Submitted
29 ဧပြီ 2017
Accepted
16 ဩ 2017
First published
16 ဩ 2017

Phys. Chem. Chem. Phys., 2018,20, 3118-3127

Solvate and protic ionic liquids from aza-crown ethers: synthesis, thermal properties, and LCST behavior

Y. Oba, M. Okuhata, T. Osakai and T. Mochida, Phys. Chem. Chem. Phys., 2018, 20, 3118 DOI: 10.1039/C7CP02807E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements