Issue 10, 2015

Atomic emission spectrometry in liquid electrode plasma using an hourglass microchannel

Abstract

Liquid electrode plasma atomic emission spectrometry (LEP-AES) is a new elemental analysis method that uses microplasma. LEP forms in a vapor bubble generated inside a narrow-center microchannel by using high-voltage DC pulse power. In this study, we used a novel hourglass microchannel having a 3-dimensionally and axisymmetrically narrowed shape, which caused a bright emission roughly 200 times that of the flat microchannel used in our previous study. We observed the spatial distribution of atomic emission and determined the limit of detection (LoD) by utilizing the confirmed spatial distribution. We found that the spatial distribution of atomic emission for 41 elements in our experiments could be classified into three patterns in accordance with a maximum emission point: anode side, narrow-center, and cathode side. Atomic emission was measured at the maximum emission point and the calibration curve for each element was made to determine the LoD. The LoD of 25 tested elements in our experiment ranged from 1 μg L−1 for Li to 306 μg L−1 for V.

Graphical abstract: Atomic emission spectrometry in liquid electrode plasma using an hourglass microchannel

Supplementary files

Article information

Article type
Technical Note
Submitted
25 ဖေ 2015
Accepted
20 ဧပြီ 2015
First published
21 ဧပြီ 2015

J. Anal. At. Spectrom., 2015,30, 2125-2128

Author version available

Atomic emission spectrometry in liquid electrode plasma using an hourglass microchannel

Y. Kohara, Y. Terui, M. Ichikawa, K. Yamamoto, T. Shirasaki, K. Kohda, T. Yamamoto and Y. Takamura, J. Anal. At. Spectrom., 2015, 30, 2125 DOI: 10.1039/C5JA00059A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements