Nonlinear elasticity and transition to macroscopic irreversibility in composite hydrogels

Ippolyti Dellatolas, Thibaut Divoux, Emanuela Del Gado and Irmgard Bischofberger

Soft Matter, 2026, 22, 2290
DOI: 10.1039/D5SM00990A

Development of flexible piezoresistive pressure sensors via direct ink writing of MWCNT/PDMS nanocomposite inks: rheological and electromechanical characterization

Jashanpreet Singh Sidhu, Aviral Misra and Arvind Bhardwaj

Nanoscale Adv., 2025, 7, 6941
DOI: 10.1039/D5NA00796H

Screen printability assessment of water-based composite electrodes for lithium-ion batteries

Nora Chelfouh, Ngoc Duc Trinh, Chloé Bois, Audrey Laventure and Mickaël Dollé

RSC Sustainability, 2025, 3, 3184
DOI: 10.1039/D5SU00211G

Durable Zn-ion hybrid capacitors using 3D printed carbon composites

Goli Nagaraju, Stefano Tagliaferri, Apostolos Panagiotopoulos, Mauro Och, Rachael Quintin-Baxendale and Cecilia Mattevi

J. Mater. Chem. A, 2022, 10, 15665
DOI: 10.1039/D2TA03488C

Printed flexible mechanical sensors

Samuel Smocot, Zixin Zhang, Lingzhi Zhang, Shu Guo and Changhong Cao

Nanoscale, 2022, 14, 17134
DOI: 10.1039/D2NR04015H

Sub-mm3 dimensional scaling of fully-integrated additively-fabricated microsupercapacitors for embedded energy storage applications

Amin Hodaei and Vivek Subramanian

J. Mater. Chem. A, 2024, 12, 10229
DOI: 10.1039/D3TA07159F

Graphene inks for printing based on thermoresponsive ABC triblock terpolymer gels

Xu Liu, Bailin Feng, Stefano Tagliaferri, Anna P. Constantinou, Alexandra E. Porter, Cecilia Mattevi and Theoni K. Georgiou

RSC Appl. Polym., 2025, 3, 973
DOI: 10.1039/D5LP00071H

Additive manufacturing of polyaniline blends for lightweight structures with tunable conductivity

Brandon T. DiTullio, Xiao Kuang, Anna M. Österholm, Augustus W. Lang, Patrick J. Kinlen, Natalie Stingelin, H. Jerry Qi and John R. Reynolds

J. Mater. Chem. C, 2023, 11, 4404
DOI: 10.1039/D2TC04183A

Tailorable conductivity of 3D PEDOT-based conductive nanostructures with pH-responsivity via a direct femtosecond laser writing technique

Qingbin Zhou, Yucheng Long, Shichao Song, Zilan Deng, Xiangping Li and Yaoyu Cao

RSC Adv., 2026, 16, 6026
DOI: 10.1039/D5RA10027E

Recent progress in non-lithium rechargeable batteries with micro to macro 3D engineered electrode architecture

Anita Parida and Soumen Giri

J. Mater. Chem. A, 2024, 12, 21553
DOI: 10.1039/D4TA02146K

One-step side-by-side 3D printing constructing linear full batteries

Junwei Ding, Huaiyang Zheng and Xiaoyan Ji

Chem. Commun., 2022, 58, 5241
DOI: 10.1039/D2CC00915C

3D printing of layered vanadium disulfide for water-in-salt electrolyte zinc-ion batteries

Stefano Tagliaferri, Goli Nagaraju, Maria Sokolikova, Rachael Quintin-Baxendale and Cecilia Mattevi

Nanoscale Horiz., 2024, 9, 742
DOI: 10.1039/D3NH00576C

3D printing of solvent-treated PEDOT:PSS inks for electromagnetic interference shielding

Saeed Ghaderi, Hadi Hosseini, Seyyed Arash Haddadi, Milad Kamkar and Mohammad Arjmand

J. Mater. Chem. A, 2023, 11, 16027
DOI: 10.1039/D3TA01021J

Yield precursor in primary creep of colloidal gels

Jae Hyung Cho and Irmgard Bischofberger

Soft Matter, 2022, 18, 7612
DOI: 10.1039/D2SM00884J

Direct ink writing of polyimide aerogels for battery thermal mitigation

Ciera E. Cipriani, Donald A. Dornbusch, Stephanie L. Vivod and Emily B. Pentzer

RSC Appl. Polym., 2024, 2, 71
DOI: 10.1039/D3LP00200D

Direct ink writing 3D printing of low-dimensional nanomaterials for micro-supercapacitors

Yanan Hou, Mutawara Mahmood Baig, Jingqi Lu, Hongcheng Zhang, Pin Liu, Guoyin Zhu, Xinlei Ge, Huan Pang and Yizhou Zhang

Nanoscale, 2024, 16, 12380
DOI: 10.1039/D4NR01590H

Review of the applications of 3D printing technology in the field of piezoelectric ceramics

Dawei Sun, Yao Lu and Tomoaki Karaki

Resources Chemicals and Materials, 2023, 2, 128
DOI: 10.1016/j.recm.2023.02.001

Advanced Layer Fabrication Technologies in Solid Oxide Fuel Cells: From Traditional Methods to Additive and Thin-Film Strategies

Serikzhan Opakhai, Asset Kabyshev, Marzhan Kubenova, Zhassulan Zeinulla, Bakytbek Mauyey and Saira Sakhabayeva

Nanoenergy Advances, 2025, 6, 2
DOI: 10.3390/nanoenergyadv6010002

Supramolecular 3D Printing Enabling One‐Step Generation of Healable and Recyclable Structurally Colored Objects

Zhen Hu, Miaomiao Li, Quanqian Lyu, Xiaodong Chen, Xiujuan Zhang, Ying Yu, Lianbin Zhang and Jintao Zhu

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202410921

Emerging trends in 3D printing of self-setting pastes with a focus on magnesium phosphate cements: From development to biomedical potential - a comprehensive review

Rafał Jesiołkiewicz, Marcin Wekwejt and Agnieszka Ossowska

Ceramics International, 2026
DOI: 10.1016/j.ceramint.2026.02.151

Multi-material additive manufacturing of energy storage and conversion devices: Recent progress and future prospects

Naimul Arefin, Hur-E-Jannat Moni, David Espinosa, Weilong Cong and Minxiang Zeng

Applied Physics Reviews, 2025, 12
DOI: 10.1063/5.0235864

Understanding the yielding behavior of graphene oxide colloids via experimental strain decomposition

Simon A. Rogers

Physics of Fluids, 2023, 35
DOI: 10.1063/5.0156022

3D Printing of Solid Electrolyte and the Application in All‐Solid‐State Batteries

Zhantong Tu, Kaiqi Chen, Sijie Liu and Xin Wu

Small Methods, 2025, 9
DOI: 10.1002/smtd.202401912

Study on the electromagnetic wave absorption performance of Ti3C2 MXene with different etching states

Zhanhong Xu, Rui Zhou, Qisi Ma, Xiang Li and Xingwang Cheng

J Mater Sci, 2023, 58, 4824
DOI: 10.1007/s10853-023-08337-2

Direct writing concave structure on viscoelastic substrate for loading and releasing liquid on skin surface

Mengdi Ma, Rui Sun, Haiting Kang, Shuo Wang, Peng Jia, Yanlin Song and Jiazhen Sun

Colloids and Surfaces B: Biointerfaces, 2023, 231, 113571
DOI: 10.1016/j.colsurfb.2023.113571

Multifunctional Screen-Printed Conductive Inks: Design Principles, Performance Challenges, and Application Horizons

Nahid Islam, Manisha Das, Bashir Ahmed Johan, Syed Shaheen Shah, Atif Saeed Alzahrani and Md. Abdul Aziz

ACS Appl. Electron. Mater., 2025, 7, 7503
DOI: 10.1021/acsaelm.5c01256

Flexibly actuated pneumatic extrusion with in-situ monitoring for direct ink writing of heterogeneous and pressure-vulnerable materials

Chaiwuth Sithiwichankit, Setthibhak Suthithanakom, Kantawatchr Chaiprabha, Kai Melde and Ratchatin Chancharoen

Sci Rep, 2025, 15
DOI: 10.1038/s41598-025-15164-9

Asymmetric Hydrogel Membranes from Cationized Chitosan and Chitin Whiskers via Direct Ink Writing for Advanced Wound Care

Leonardo H. Semensato, Danilo M. dos Santos, Maria Eduarda Jacinto, Andrei Leitão, Daniel S. Correa and Sergio P. Campana Filho

ACS Appl. Polym. Mater., 2026, 8, 192
DOI: 10.1021/acsapm.5c03524

Effect of Process Parameters and Material Selection on the Quality of 3D Printed Products by Fused Deposition Modeling (FDM): A Review

Sivasubramanian Palanisamy, Ganesan Karuppiah, Praveen Kumar, Shanmugam Dharmalingam, Suhail Mubarak, Carlo Santulli, Nadir Ayrilmis, Srikanth Karumuri and Sheraz Ahmad

Advances in Polymer Technology, 2024, 2024
DOI: 10.1155/adv/3480281

Additive manufacturing of smart polymeric composites: Literature review and future perspectives

Hamid Ikram, Ans Al Rashid and Muammer Koç

Polymer Composites, 2022, 43, 6355
DOI: 10.1002/pc.26948

Coagulation Bath‐Assisted 3D Printing of PEDOT:PSS with High Resolution and Strong Substrate Adhesion for Bioelectronic Devices

Yi Zheng, Yangdong Wang, Fan Zhang, Shaomin Zhang, Kiryl D. Piatkevich, Nanjia Zhou and Jonathan K. Pokorski

Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202101514

Co3O4 Quantum Dots Intercalation Liquid‐Crystal Ordered‐Layered‐Structure Optimizing the Performance of 3D‐Printing Micro‐Supercapacitors

Huijie Zhou, Yangyang Sun, Hui Yang, Yijian Tang, Yiyao Lu, Zhen Zhou, Shuai Cao, Songtao Zhang, Songqing Chen, Yizhou Zhang and Huan Pang

Advanced Science, 2023, 10
DOI: 10.1002/advs.202303636

Flexible, fast and freestanding UV sensors by printing of networked materials

Philipp Schadte, Roshani Madurawala, Maik-Ivo Terasa, Maik Tienken, Louis Joswig, Jörg Bahr, Sören Kaps, Leonard Siebert and Rainer Adelung

Applied Materials Today, 2025, 45, 102846
DOI: 10.1016/j.apmt.2025.102846

Comprehensive review for zinc powder anodes: Significance, optimizing design, and industrial feasibility in zinc-ion batteries

Lin Qin, Jinqiu Zhou, Meizhu Sun, Xiuzhen Yang, Xiaowei Shen, Chenglin Yan and Tao Qian

Energy Storage Materials, 2025, 74, 103917
DOI: 10.1016/j.ensm.2024.103917

Multimaterial extrusion 3D printing printheads

Nathan C. Brown, Daniel C. Ames and Jochen Mueller

Nat Rev Mater, 2025, 10, 807
DOI: 10.1038/s41578-025-00809-y

Additive‐Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels

Matthias Rebber, Malte Trommler, Irina Lokteva, Samanehalsadat Ehteram, Andreas Schropp, Sandra König, Michael Fröba and Dorota Koziej

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202112914

Employing a combination of direct ink writing and near-infrared-induced photopolymerization facilitates 3D printing of unsupported multi-scale ceramics: The bone tissue engineering approach

Yongjie Qi, Hangying Lv, Qinghua Huang and Guangyong Pan

European Polymer Journal, 2024, 213, 113133
DOI: 10.1016/j.eurpolymj.2024.113133

Multi-scale 3D printing of negative electrodes: A pathway to enhanced lithium-ion battery performance

Dominika Gastol, Pengcheng Zhu, Yongxiu Chen, Matthew J. Capener and Emma Kendrick

Journal of Energy Storage, 2026, 152, 120106
DOI: 10.1016/j.est.2025.120106

Rapid manufacture of sodium polyaluminate electrolyte ceramics for solid state batteries via direct ink writing

Athanasios Goulas, Dongrui Xie, George Gatzoulis, Sina Saremi-Yarahmadi and Bala Vaidhyanathan

Journal of the European Ceramic Society, 2024, 44, 5041
DOI: 10.1016/j.jeurceramsoc.2024.02.049

Manufacturing-oriented review on 3D printed lithium-ion batteries fabricated using material extrusion

Alexis Maurel, Antonio Pavone, Gianni Stano, Ana C. Martinez, Eric MacDonald and Gianluca Percoco

Virtual and Physical Prototyping, 2023, 18
DOI: 10.1080/17452759.2023.2264281

Direct ink writing of geopolymer with high spatial resolution and tunable mechanical properties

Siqi Ma, Shuai Fu, Shengjian Zhao, Peigang He, Guoru Ma, Meirong Wang, Dechang Jia and Yu Zhou

Additive Manufacturing, 2021, 46, 102202
DOI: 10.1016/j.addma.2021.102202

Artificial intelligence and machine learning in the design and additive manufacturing of responsive composites

Wonbong Choi, Rigoberto C. Advincula, H. Felix Wu and Yijie Jiang

MRS Communications, 2023, 13, 714
DOI: 10.1557/s43579-023-00473-9

High‐Resolution 3D Printing for Electronics

Young‐Geun Park, Insik Yun, Won Gi Chung, Wonjung Park, Dong Ha Lee and Jang‐Ung Park

Advanced Science, 2022, 9
DOI: 10.1002/advs.202104623

Ethanol‐Induced Ni2+‐Intercalated Cobalt Organic Frameworks on Vanadium Pentoxide for Synergistically Enhancing the Performance of 3D‐Printed Micro‐Supercapacitors

Huijie Zhou, Guoyin Zhu, Shengyang Dong, Pin Liu, Yiyao Lu, Zhen Zhou, Shuai Cao, Yizhou Zhang and Huan Pang

Advanced Materials, 2023, 35
DOI: 10.1002/adma.202211523

Carbon-Based Piezoresistive Polymer Nanocomposites by Extrusion Additive Manufacturing: Process, Material Design, and Current Progress

James D. Banks and Anahita Emami

3D Printing and Additive Manufacturing, 2024, 11, 548
DOI: 10.1089/3dp.2022.0153

Direct ink writing of porous structures in 316L stainless steel: Printable window construction and sintering performance evaluation

Dechao Lyu, Yumeng Han, Peng Jin, Yang Gao, Huajian Sun, Congqian Cheng and Qingping Liu

Journal of Materials Research and Technology, 2026, 42, 1339
DOI: 10.1016/j.jmrt.2026.03.118

Recent progress and perspective in additive manufacturing of EMI shielding functional polymer nanocomposites

Amirjalal Jalali, Ruiyan Zhang, Reza Rahmati, Mohammadreza Nofar, Mohini Sain and Chul B. Park

Nano Res., 2023, 16, 1
DOI: 10.1007/s12274-022-5053-4

Two-dimensional (2D) materials for 3D printed micro-supercapacitors and micro-batteries

Ghuzanfar Saeed, Taehun Kang, Jin Suk Byun, Donghyun Min, Jun Su Kim, Shrikant Vaiju Sadavar and Ho Seok Park

Energy Mater, 2024, 4
DOI: 10.20517/energymater.2023.81

3D Printing of Nanocomposites: Applications in Conductive and Healable Materials

Viranchika Bijalwan, Sravendra Rana, Sandra Schlögl, Wolfgang H. Binder and Gun Jin Yun

Polymer Reviews, 2025, 65, 975
DOI: 10.1080/15583724.2025.2470689

Unconventional direct ink writing of polyelectrolyte films

Guy Jacob Cordonier, KmProttoy Shariar Piash, Rebecca Erwin, Michael Ferrebee, Oishi Sanyal and Konstantinos Sierros

MRS Bulletin, 2023, 48, 720
DOI: 10.1557/s43577-022-00461-9

Collaborative printing and in-situ frontal curing of highly-viscous thermosetting composites

Chongjie Gao, Ruochen Liu, Wei Li, Jingjing Qiu and Shiren Wang

Journal of Manufacturing Processes, 2023, 89, 1
DOI: 10.1016/j.jmapro.2023.01.048

Go with the flow: Rheological requirements for direct ink write printability

Peiran Wei, Ciera Cipriani, Chia-Min Hsieh, Krutarth Kamani, Simon Rogers and Emily Pentzer

Journal of Applied Physics, 2023, 134
DOI: 10.1063/5.0155896

Direct ink writing‐based additive manufacturing of styrene‐isoprene‐styrene block copolymer

Sourabh Goyal, Aleti Yesu and Shib Shankar Banerjee

Polymer Engineering & Sci, 2023, 63, 3708
DOI: 10.1002/pen.26478

Anisotropic Nanomaterial Liquid Crystals: From Fiber Spinning to Additive Manufacturing

Virginia A. Davis

Langmuir, 2023, 39, 3829
DOI: 10.1021/acs.langmuir.2c03519

Balancing Functionality and Printability: High-Loading Polymer Resins for Direct Ink Writing

Shelbie A. Legett, Xavier Torres, Andrew M. Schmalzer, Adam Pacheco, John R. Stockdale, Samantha Talley, Tom Robison and Andrea Labouriau

Polymers, 2022, 14, 4661
DOI: 10.3390/polym14214661

FFF/FDM 3D-Printed Solid Polymer Electrolytes Based on Acrylonitrile Copolymers for Lithium-Ion Batteries

Arkadiusz Czerwiński, Magdalena Słojewska, Justyna Jurczak, Maciej Dębowski and Ewa Zygadło-Monikowska

Molecules, 2024, 29, 4526
DOI: 10.3390/molecules29194526

Additive Manufacturing of Magnetic Materials for Energy, Environment, Healthcare, and Industry Applications

Bahareh Rezaei, Hur‐E‐Jannat Moni, Ioannis H. Karampelas, Arjun Sharma, Shahriar Mostufa, Ebrahim Azizi, Xiaolong Liu, Minxiang Zeng, Jenifer Gómez‐Pastora, Rui He and Kai Wu

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202416823

3D printing of customized MnO2 cathode for aqueous zinc-ion batteries

Zhen LIU, Han-bing HE, Ze-xiang LUO, Xiao-feng WANG and Jing ZENG

Transactions of Nonferrous Metals Society of China, 2023, 33, 1193
DOI: 10.1016/S1003-6326(23)66175-8

Advances in 3d Printed-Based (Bio)Sensors for Food Analysis

Danilo M. dos Santos, Rafael M. Cardoso, Fernanda L. Migliorini, Murilo H. M. Facure, Luiza A. Mercante, Luiz H. C. Mattoso and Daniel Correa

SSRN Journal, 2022
DOI: 10.2139/ssrn.4016300

3D-printed graded graphene aerogel electrode for vanadium redox flow battery

Qiang Li, Jiabin Xu, Xu Wu, Tianyu Zhang, Jie Li, Zhichao Xue, Mingfu Yu, Lihua Luan, Tian Zhang and Hong Sun

Journal of Energy Storage, 2024, 101, 113951
DOI: 10.1016/j.est.2024.113951

Unraveling the Impact of Competing Interactions on Nonequilibrium Colloidal Gelation

Joeri Opdam, Michio Tateno and Hajime Tanaka

ACS Nano, 2025, 19, 21515
DOI: 10.1021/acsnano.5c03244

Aqueous Inks of Pristine Graphene for 3D Printed Microsupercapacitors with High Capacitance

Stefano Tagliaferri, Goli Nagaraju, Apostolos Panagiotopoulos, Mauro Och, Gang Cheng, Francesco Iacoviello and Cecilia Mattevi

ACS Nano, 2021, 15, 15342
DOI: 10.1021/acsnano.1c06535

Processing dynamics of carbon nanotube-epoxy nanocomposites during 3D printing

Ali Zein Khater, M.A.S.R. Saadi, Sohini Bhattacharyya, Alex Kutana, Manoj Tripathi, Mithil Kamble, Shaowei Song, Minghe Lou, Morgan Barnes, Matthew D. Meyer, Vijay Vedhan Jayanthi Harikrishnan, Alan B. Dalton, Nikhil Koratkar, Chandra Sekhar Tiwary, Peter J. Boul, Boris Yakobson, Hanyu Zhu, Pulickel M. Ajayan and Muhammad M. Rahman

Cell Reports Physical Science, 2023, 4, 101617
DOI: 10.1016/j.xcrp.2023.101617

4D Printing of Magnetically Responsive Materials and Their Applications

Yunfang Bai, Siying Zhu, Jin Liang, Ruizhe Xing and Jie Kong

Research, 2025, 8
DOI: 10.34133/research.0847

3D Printed Graphene and Graphene/Polymer Composites for Multifunctional Applications

Ying Wu, Chao An and Yaru Guo

Materials, 2023, 16, 5681
DOI: 10.3390/ma16165681

Viscoelastic characterization and extrusion performance of a novel ink for metal direct ink writing

Necati Ercan, Onur Saray and Mahmut Ekrem Parlak

Rapid Prototyping Journal, 2025, 31, 2068
DOI: 10.1108/RPJ-09-2024-0386

3D Printing‐Enabled Design and Manufacturing Strategies for Batteries: A Review

Nathan Fonseca, Sri Vaishnavi Thummalapalli, Sayli Jambhulkar, Dharneedar Ravichandran, Yuxiang Zhu, Dhanush Patil, Varunkumar Thippanna, Arunachalam Ramanathan, Weiheng Xu, Shenghan Guo, Hyunwoong Ko, Mofe Fagade, Arunchala M. Kannan, Qiong Nian, Amir Asadi, Guillaume Miquelard‐Garnier, Anna Dmochowska, Mohammad K. Hassan, Maryam Al‐Ejji, Hassan M. El‐Dessouky, Felicia Stan and Kenan Song

Small, 2023, 19
DOI: 10.1002/smll.202302718

Recent advancements in MXenes synthesis, properties, and cutting-edge applications: A comprehensive review

Kahila Baghchesaraee, Ehsan Ghasali, Saleem Raza, Andrii Babenko, Giti Paimard, Tariq Bashir, Hossein Maleki-Ghaleh, Li Jie and Yasin Orooji

Journal of Environmental Chemical Engineering, 2024, 12, 113546
DOI: 10.1016/j.jece.2024.113546

Nano-sized boron composites energetic materials: Preparation, combustion and mechanism

Mingyu Li, Ruixiao Li, Vladimir Zarko, Richard A. Yetter, Zhongyue Zhou and Weiqiang Pang

Applications in Energy and Combustion Science, 2026, 25, 100458
DOI: 10.1016/j.jaecs.2026.100458

Grid-patterned three-dimensionally printed Li₄Ti₅O₁₂ anodes: hierarchical porosity and carbon framework enable high energy density and areal capacity in lithium-ion batteries

Jean Pierre Mwizerwa, Sefiu Abolaji Rasaki, Ferdinand Niyonyungu, Jean De Dieu Niyonteze and Walter Nsengiyumva

Journal of Colloid and Interface Science, 2026, 707, 139715
DOI: 10.1016/j.jcis.2025.139715

Advances of sacrificial strategies in additive manufacturing: towards precision 3D architectures and broad material adaptability

Wenwan Shi, Ming Gao, Xin Zhou, Xiaolu Sun, Haibo Ding, Yuning Zhou, Shuheng Li, Jing Sun, Xiaoxiang Gao, Xiaojiang Liu and Zhongze Gu

Int. J. Extrem. Manuf., 2026, 8, 032005
DOI: 10.1088/2631-7990/ae37ad

Engineering 3D Printed Structures Towards Electrochemically Driven Green Ammonia Synthesis: A Perspective

Akshay Kumar K. Padinjareveetil, Juan V. Perales‐Rondon and Martin Pumera

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202202080

Versatile Patterning of Liquid Metal via Multiphase 3D Printing

Dhanush Patil, Siying Liu, Dharneedar Ravichandran, Sri Vaishnavi Thummalapalli, Yuxiang Zhu, Tengteng Tang, Yuval Golan, Guillaume Miquelard‐Garnier, Amir Asadi, Xiangjia Li, Xiangfan Chen and Kenan Song

Small, 2024, 20
DOI: 10.1002/smll.202402432

Sustainable 3D printing by reversible salting-out effects with aqueous salt solutions

Donghwan Ji, Joseph Liu, Jiayu Zhao, Minghao Li, Yumi Rho, Hwansoo Shin, Tae Hee Han and Jinhye Bae

Nat Commun, 2024, 15
DOI: 10.1038/s41467-024-48121-7

Emerging trends in 3D printing techniques for Li S batteries

Anni Ai, Kaijie Miao and Jiangqi Zhou

Sustainable Materials and Technologies, 2025, 46, e01730
DOI: 10.1016/j.susmat.2025.e01730

Vertical Alignment of Anisotropic Fillers Assisted by Expansion Flow in Polymer Composites

Hongyu Niu, Haichang Guo, Lei Kang, Liucheng Ren, Ruicong Lv and Shulin Bai

Nano-Micro Lett., 2022, 14
DOI: 10.1007/s40820-022-00909-2

Enhancing the Mechanical Properties of 3D-Printed Waterborne Polyurethane-Urea and Cellulose Nanocrystal Scaffolds through Crosslinking

Julen Vadillo, Izaskun Larraza, Tamara Calvo-Correas, Loli Martin, Christophe Derail and Arantxa Eceiza

Polymers, 2022, 14, 4999
DOI: 10.3390/polym14224999

A novel smart disinfection system using 3D-printed and electrically conductive composite hydrogel

Shaheryar A. Khan, Anjum Naeem Malik, Basak Velioglu, Seref Gul, Ibrahim Halil Kavakli and Ismail Lazoglu

emergent mater., 2025, 8, 1171
DOI: 10.1007/s42247-024-00632-1

Graded biological materials and additive manufacturing technologies for producing bioinspired graded materials: An overview

Lei Ren, Zhenguo Wang, Luquan Ren, Zhiwu Han, Qingping Liu and Zhengyi Song

Composites Part B: Engineering, 2022, 242, 110086
DOI: 10.1016/j.compositesb.2022.110086

Printable Single‐Ion Polymer Nanoparticle Electrolytes for Lithium Batteries

Antonela Gallastegui, Rafael Del Olmo, Miryam Criado‐Gonzalez, Jose Ramon Leiza, Maria Forsyth and David Mecerreyes

Small Science, 2024, 4
DOI: 10.1002/smsc.202300235

3D Printing of Ridged FeS2 Cathodes for Improved Rate Capability and Custom-Form Lithium Batteries

Jorge A. Cardenas, John P. Bullivant, Igor V. Kolesnichenko, Devin J. Roach, Michael A. Gallegos, Eric N. Coker, Timothy N. Lambert, Eric Allcorn, A. Alec Talin, Adam W. Cook and Katharine L. Harrison

ACS Appl. Mater. Interfaces, 2022, 14, 45342
DOI: 10.1021/acsami.2c11954

3D Printing Enables Customizable Batteries

Huifa Shi, Jiakai Cao, Zhenhua Sun, Zahid Ali Ghazi, Xiaoyang Zhu, Sa Han, Danyang Ren, Guixia Lu, Hongbo Lan and Feng Li

Batteries & Supercaps, 2023, 6
DOI: 10.1002/batt.202300161

Direct ink writing of 2D material-based supercapacitors

Xiaocong Tian

2D Mater., 2022, 9, 012001
DOI: 10.1088/2053-1583/ac3f43

A microfluidic printhead with integrated hybrid mixing by sequential injection for multimaterial 3D printing

Islam Hassan and Ponnambalam Ravi Selvaganapathy

Additive Manufacturing, 2022, 50, 102559
DOI: 10.1016/j.addma.2021.102559

A Comprehensive Review of Application Techniques for Thermal-Protective Elastomeric Ablative Coatings in Solid Rocket Motor Combustion Chambers

Mohammed Meiirbekov, Marat Nurguzhin, Marat Ismailov, Marat Janikeyev, Zhannat Kadyrov, Myrzakhan Omarbayev, Assem Kuandyk, Nurmakhan Yesbolov, Meiir Nurzhanov, Sunkar Orazbek and Mukhammed Sadykov

Technologies, 2026, 14, 77
DOI: 10.3390/technologies14020077

Spreading anomaly semantic segmentation and 3D reconstruction of binder jet additive manufacturing powder bed images

Alexander Gourley, Jonathan Kaufman, Bashu Aman, Edwin Schwalbach, Jack Beuth, Lisa Rueschhoff and B. Reeja-Jayan

Int J Adv Manuf Technol, 2024
DOI: 10.1007/s00170-024-14311-2

Self-standing metal-organic frameworks and their derivatives for electrochemical energy storage and conversion: Current progress and perspectives

Zhuozhao Wu, Jingwen Qiu, Gangwen Fu, Ruiyi Jiang, Danwei Zhang and Xi Xu

Chemical Engineering Journal, 2023, 477, 147230
DOI: 10.1016/j.cej.2023.147230

A review on recent advancements in additive manufacturing techniques

Dushyant Dubey, Satinder Paul Singh and Bijoya Kumar Behera

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024
DOI: 10.1177/09544089241275860

3D printable cyanate esters-polytetrafluoroethylene composite

Yanan Zhao, Zhouqishuo Cai, Xiaowen Qiu, Jinmeng Zhang, Xinping Lin, Zewen Lin, Xiaolan Hu and Hua Bai

J Mater Sci, 2024, 59, 9350
DOI: 10.1007/s10853-024-09789-w

Clog-Free, Low-Cost, and Uniform Electrode Inks for 3D Printed Lithium-Ion Batteries

Shengqi Ao, Zhansheng Guo, Yicheng Song, Daining Fang and Yinhua Bao

ACS Appl. Energy Mater., 2022, 5, 6970
DOI: 10.1021/acsaem.2c00594

Advanced manufacturing approaches for electrochemical energy storage devices

Gillian F. Hawes, Sarish Rehman, Yverick Rangom and Michael A. Pope

International Materials Reviews, 2023, 68, 323
DOI: 10.1080/09506608.2022.2086388

The advancements of 3D-printed electrodes in electrochemistry

Shamsa Munir, Bakhtiar Ali and Salma Gul

Discov. Electrochem., 2024, 1
DOI: 10.1007/s44373-024-00013-7

3D-Printed Flexible and Integrable Asymmetric Microsupercapacitors with High-Areal-Energy-Density

Lihui Chen, Pinjing Yao, Wangyang Li, Qinghuang Huang, Jixi Chen, Huagui Zhang and Xinghui Wang

ACS Appl. Mater. Interfaces, 2025, 17, 18666
DOI: 10.1021/acsami.5c01164

Continuous Nanoparticle Patterning Strategy in Layer‐Structured Nanocomposite Fibers

Weiheng Xu, Rahul Franklin, Dharneedar Ravichandran, Mohammed Bawareth, Sayli Jambhulkar, Yuxiang Zhu, Mounika Kakarla, Faizan Ejaz, Beomjin Kwon, Mohammad K. Hassan, Maryam Al‐Ejji, Amir Asadi, Nikhilesh Chawla and Kenan Song

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202204731

Direct Ink Writing: A 3D Printing Technology for Diverse Materials

M. A. S. R. Saadi, Alianna Maguire, Neethu T. Pottackal, Md Shajedul Hoque Thakur, Maruf Md. Ikram, A. John Hart, Pulickel M. Ajayan and Muhammad M. Rahman

Advanced Materials, 2022, 34
DOI: 10.1002/adma.202108855

MXene for 3D Printing Applications: A Review

Payal V. Khond and Aarti P. More

JOM, 2025, 77, 7111
DOI: 10.1007/s11837-025-07485-x

Additive manufacturing of high-performance vinyl ester resin via direct ink writing with UV-thermal dual curing

Ruowen Tu and Henry A. Sodano

Additive Manufacturing, 2021, 46, 102180
DOI: 10.1016/j.addma.2021.102180

Challenges in carbon ink formulation and strategies for fabrication of flexible supercapacitors

Mohammad Saquib, Shilpa Shetty, Lakshmikanth M, Akshatha Rathod, Kavya Naik, Ramakrishna Nayak and M. Selvakumar

Carbon Trends, 2025, 19, 100458
DOI: 10.1016/j.cartre.2025.100458

3D printing of liquid crystal elastomers-based actuator for an inchworm-inspired crawling soft robot

Xiaowen Song, Weitian Zhang, Haoran Liu, Limeng Zhao, Qi Chen and Hongmiao Tian

Front. Robot. AI, 2022, 9
DOI: 10.3389/frobt.2022.889848

Hybrid Formative‐Additive Manufacturing

Nathan C. Brown and Jochen Mueller

Advanced Materials, 2025, 37
DOI: 10.1002/adma.202417609

Effects of binder systems on the 3D printability and combustion performance of Al/AP energetic composites

Haoyue Xin, Xinzhou Wu and Hui Ren

FirePhysChem, 2026
DOI: 10.1016/j.fpc.2026.01.012

Three‐dimensional printing of graphene‐based materials for energy storage and conversion

Yanqiu Jiang, Fan Guo, Yingjun Liu, Zhen Xu and Chao Gao

SusMat, 2021, 1, 304
DOI: 10.1002/sus2.27

Preparation of graphene/polydimethylsiloxane flexible resistive pressure sensors based on direct ink writing 3D printing

Yuan Xiao, Chengan Hu, Leipeng Yang, Junfeng Wu and Jiahao Li

Sensors and Actuators A: Physical, 2025, 382, 116148
DOI: 10.1016/j.sna.2024.116148

Research progress on 3D-printed cellulose-based aerogels

Yaqian Hu, Shiwen Song, Defang Pan and Junyong Chen

Cellulose, 2026, 33, 1757
DOI: 10.1007/s10570-026-06953-0

Aqueous aluminium titanate paste for the liquid deposition modelling

F. Bezzi, P. Fabbri, G. Magnani, E. Salernitano, M. Scafè and A. Strafella

Open Ceramics, 2022, 9, 100224
DOI: 10.1016/j.oceram.2022.100224

Strategies for enhancing capacity and rate performance of two-dimensional material-based supercapacitors

Huayan Liu, Yifei Chen, Mengzhao Yang and Jiajun Gu

Acta Physico-Chimica Sinica, 2025, 41, 100063
DOI: 10.1016/j.actphy.2025.100063

Breakthrough to the pragmatic evolution of direct ink writing: progression, challenges, and future

Komal Sandeep Pandya, Sarang Subhashchandra Shindalkar and Balasubramanian Kandasubramanian

Prog Addit Manuf, 2023, 8, 1303
DOI: 10.1007/s40964-023-00399-7

Design of slurries for 3D printing of sodium-ion battery electrodes

Carl D. Reynolds, Giar Alsofi, Junrui Yang, Mark J.H. Simmons and Emma Kendrick

Journal of Manufacturing Processes, 2024, 110, 161
DOI: 10.1016/j.jmapro.2023.12.042

MXene 3D/4D Printing: Ink Formulation and Electrochemical Energy Storage Applications

Shaista Nouseen and Martin Pumera

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202421987

Sustainability of self-healing polymers: A holistic perspective towards circularity in polymer networks

Kenneth Cerdan, Marlies Thys, Aleix Costa Cornellà, Fatma Demir, Sophie Norvez, Richard Vendamme, Niko Van den Brande, Peter Van Puyvelde and Joost Brancart

Progress in Polymer Science, 2024, 152, 101816
DOI: 10.1016/j.progpolymsci.2024.101816

Direct recycling of 3D-printed Co-YDZ catalysts for ethanol steam reforming

Seyed Ali Razavi, Gemma Fargas, Isabel Serrano, Miguel Ángel Laguna-Bercero, Tània Vilella, Luis Llanes, Daniel Rodríguez, Maria-Pau Ginebra, Jordi Llorca and Miguel Morales

Journal of Environmental Chemical Engineering, 2025, 13, 120246
DOI: 10.1016/j.jece.2025.120246

Additive manufacturing, topology optimization of thermoelectric generators, and beyond: a comprehensive review on pioneering thermoelectric conversion for a sustainable future

K. Bun, S.S. Rapaka, S. Pathak, A. Date and X. Wang

Applied Thermal Engineering, 2025, 278, 127437
DOI: 10.1016/j.applthermaleng.2025.127437

Printing by yield stress fluid shaping

A. Geffrault, H. Bessaies-Bey, N. Roussel and P. Coussot

Additive Manufacturing, 2023, 75, 103752
DOI: 10.1016/j.addma.2023.103752

Printable supercapacitors and their printing technologies: A review

Y. C. Goswami and Sangar Begzaad

Energy Storage, 2024, 6
DOI: 10.1002/est2.666

Time Code for multifunctional 3D printhead controls

Sarah Propst and Jochen Mueller

Nat Commun, 2025, 16
DOI: 10.1038/s41467-025-56140-1

Printable electrode materials for supercapacitors

Yidan Gao, Xiaowen Guo, Ziming Qiu, Guangxun Zhang, Rongmei Zhu, Yizhou Zhang and Huan Pang

ChemPhysMater, 2022, 1, 17
DOI: 10.1016/j.chphma.2021.09.002

Jammed Microgels in Deep Eutectic Solvents as a Green and Low-Cost Ink for 3D Printing of Reliable Auxetic Strain Sensors

Trung Hieu Vo, Phuc Khanh Lam, Yu-Jane Sheng and Heng-Kwong Tsao

ACS Appl. Mater. Interfaces, 2023, 15, 33109
DOI: 10.1021/acsami.3c05209

Compendious review on 3D-printed gels for effluent treatment

Apsara Panchapakesan, Priyanka Anil Dalave, Balasubramanian Kandasubramanian and Sikiru O. Ismail

Hybrid Advances, 2024, 6, 100272
DOI: 10.1016/j.hybadv.2024.100272

Tuning the 3D Printability and Thermomechanical Properties of Radiation Shields

Zachary Brounstein, Jianchao Zhao, Jeffrey Wheat and Andrea Labouriau

Polymers, 2021, 13, 3284
DOI: 10.3390/polym13193284

Recent progress of integrating MOFs into printed devices and their applications

Hui Yang, Huijie Zhou, Guangxun Zhang, Xiaotian Guo and Huan Pang

Sci. China Mater., 2023, 66, 441
DOI: 10.1007/s40843-022-2226-6

Towards a study protocol: A data-driven workflow to identify error sources in direct ink write mechatronics

Hein Htet Aung, Jayvic Cristian Jimenez, Brian Au, Pigeon Caviness, Robert Cerda, Quynh D. Tran, Pawan Tripathi, Brian Giera, Roger H. French and Laura S. Bruckman

MRS Advances, 2024, 9, 837
DOI: 10.1557/s43580-024-00846-9

Hollow Nanospheres of Red Phosphorus for Fireproof Flexible Sensors Fabricated via 3D Printing

Kunpeng Song, Qiushi Li, Yongshuai Yuan, Shizun Hu, Jin Liu, Yan Zhang, Ye-Tang Pan, Wei Zhao and Jiyu He

ACS Appl. Nano Mater., 2022, 5, 18080
DOI: 10.1021/acsanm.2c04019

Direct Ink Writing for Electrochemical Device Fabrication: A Review of 3D-Printed Electrodes and Ink Rheology

Nickolas D. Polychronopoulos and Angeliki Brouzgou

Catalysts, 2024, 14, 110
DOI: 10.3390/catal14020110

4D Aliphatic photopolymer polycarbonates as direct ink writing of biodegradable, conductive graphite‐composite materials

Scott Brooks, Zachary Cartwright, David Merckle and Andrew C. Weems

Polymer Composites, 2021, 42, 5134
DOI: 10.1002/pc.26211

Recent advances in ink-based additive manufacturing for porous structures

Zipeng Guo and Chi Zhou

Additive Manufacturing, 2021, 48, 102405
DOI: 10.1016/j.addma.2021.102405

Fourier-transform rheology and printability maps of complex fluids for three-dimensional printing

Esther García-Tuñón, Rishav Agrawal, Bin Ling and David J. C. Dennis

Physics of Fluids, 2023, 35
DOI: 10.1063/5.0128658

Water‐Based Activated Carbon Ink for Printed Flexible Biodegradable Supercapacitors

Neha Sharma, Ganapathi Rao Kandregula, Aarju Mathew Koshy, Kothandaraman Ramanujam, Debdutta Ray and Parasuraman Swaminathan

Advanced Sustainable Systems, 2025, 9
DOI: 10.1002/adsu.202400649

The effect of volume loading on the extrusion of bimodal glass bead mixtures

Joseph R. Lawrence, Hugh R. Lipic, Timothy D. Manship and Steven F. Son

npj Adv. Manuf., 2024, 1
DOI: 10.1038/s44334-024-00008-7

Extrusion‐printing additive manufacturing of composite solid propellant by fast curing isocyanated‐HTPB and HTPB blending‐extruded via a static mixer

Liyuan Ren, Licong Jiang, Kang Chen, Qirui Guo, Leqin Xiao and Weiliang Zhou

Propellants Explo Pyrotec, 2024, 49
DOI: 10.1002/prep.202400021

Direct Ink Writing of Single‐Crystal‐Assembled Perovskite Thick Films for High‐Performance X‐ray Flat‐Panel Detectors

Yulong Wang, Xiuwen Xu, Guansheng Xing, Shanxiao Lin, Yurou Yan, Quan Zhou, Jianmei Chen, Wenjuan Zhu, Bing Chen, Shujuan Liu and Qiang Zhao

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202423403

3D printing of metals using biodegradable cellulose hydrogel inks

Carla Joyce C. Nocheseda, Fred P. Liza, Alvin Kim M. Collera, Eugene B. Caldona and Rigoberto C. Advincula

Additive Manufacturing, 2021, 48, 102380
DOI: 10.1016/j.addma.2021.102380

Additive Manufacturing: A Paradigm Shift in Revolutionizing Catalysis with 3D Printed Photocatalysts and Electrocatalysts Toward Environmental Sustainability

Valerine Khoo, Sue‐Faye Ng, Choon‐Yian Haw and Wee‐Jun Ong

Small, 2024, 20
DOI: 10.1002/smll.202401278

Solvent triggered shape morphism of 4D printed hydrogels

Smruti Parimita, Amit Kumar, Hariharan Krishnaswamy and Pijush Ghosh

Journal of Manufacturing Processes, 2023, 85, 875
DOI: 10.1016/j.jmapro.2022.11.065

Cobalt-Zirconia coated monoliths fabricated by Direct Ink Writing for catalytic applications

Seyed Ali Razavi, Gemma Fargas, Isabel Serrano, Miguel Ángel Laguna-Bercero, Luis Llanes, Jordi Llorca and Miguel Morales

Journal of the European Ceramic Society, 2025, 45, 117063
DOI: 10.1016/j.jeurceramsoc.2024.117063

Enhanced Polarization in Ferroelectric Composites via DIW-Controlled Perovskite Nanosheet Orientation

Yuxin Han, Zhe Zhu and Hexing Liu

Nanomaterials, 2026, 16, 432
DOI: 10.3390/nano16070432

Polymeric Optical Waveguides: An Approach to Different Manufacturing Processes

Frank Martinez Abreu, José Javier Imas, Aritz Ozcariz, Cesar Elosua, Jesus M. Corres and Ignacio R. Matias

Applied Sciences, 2025, 15, 10644
DOI: 10.3390/app151910644

Direct‐Ink‐Writing of Electroactive Polymers for Sensing and Energy Storage Applications

Rafael S. Pinto, João P. Serra, João C. Barbosa, Renato Gonçalves, Maria M. Silva, Senentxu Lanceros‐Méndez and Carlos M. Costa

Macro Materials & Eng, 2021, 306
DOI: 10.1002/mame.202100372

Material extrusion of electrochemical energy storage devices for flexible and wearable electronic applications

Sudhansu Sekhar Nath, Ishant G. Patil and Poonam Sundriyal

Journal of Energy Storage, 2024, 79, 110129
DOI: 10.1016/j.est.2023.110129

Direct Ink Writing of cobalt-zirconia monoliths for catalytic applications: A novel single-step fabrication approach

Seyed Ali Razavi, Gemma Fargas, Tània Vilella, Isabel Serrano, Miguel Ángel Laguna-Bercero, Luis Llanes, Daniel Rodríguez, Maria-Pau Ginebra, Jordi Llorca and Miguel Morales

Journal of the European Ceramic Society, 2025, 45, 117137
DOI: 10.1016/j.jeurceramsoc.2024.117137

Polymer-Assisted 3D Printing of Inductor Cores

Zhidong Luo, Qi Yue, Xueyuan Li, Yuchen Zhu, Xuzhao Liu and Lee A. Fielding

ACS Appl. Mater. Interfaces, 2024, 16, 10764
DOI: 10.1021/acsami.3c18956

Recent Advances in 3D Printed Sensors: Materials, Design, and Manufacturing

Yijie Jiang, Md. Nurul Islam, Rui He, Xiaozhou Huang, Peng‐Fei Cao, Rigoberto C. Advincula, Narendra Dahotre, Pei Dong, H. Felix Wu and Wonbong Choi

Adv Materials Technologies, 2023, 8
DOI: 10.1002/admt.202200492

Emerging application of 3D-printing techniques in lithium batteries: From liquid to solid

Xuejie Gao, Matthew Zheng, Xiaofei Yang, Runcang Sun, Jiujun Zhang and Xueliang Sun

Materials Today, 2022, 59, 161
DOI: 10.1016/j.mattod.2022.07.016

3D Printing for Solid‐State Energy Storage

Xiaocong Tian and Bingang Xu

Small Methods, 2021, 5
DOI: 10.1002/smtd.202100877

Direct ink writing of customized polymeric structures embedded in a nano-silicate based supporting matrix

Shubham Shankar Mohol and Pulak Mohan Pandey

Polymer, 2024, 312, 127635
DOI: 10.1016/j.polymer.2024.127635

Fifty shades of yield stress fluids: rheological challenges and engineering perspectives

P. Coussot

Rheol Acta, 2025, 64, 167
DOI: 10.1007/s00397-025-01488-w

Critical review of drying processes for electrode materials: Bridging fundamentals and advanced manufacturing for energy storage devices

Arun S. Mujumdar, Amirhossein Barzigar, S.M Hosseinalipour and Amirhossein Edalatpour

Drying Technology, 2025, 43, 2042
DOI: 10.1080/07373937.2025.2564715

A Simple Strategy for Constructing Hierarchical Composite Electrodes of PPy‐Posttreated 3D‐Printed Carbon Aerogel with Ultrahigh Areal Capacitance over 8000 mF cm–2

Jianming Yang, Ningxin Cui, Dongxiao Han, Jun Shen, Guangming Wu, Zhihua Zhang, Lili Qin, Bin Zhou and Ai Du

Adv Materials Technologies, 2022, 7
DOI: 10.1002/admt.202101325

3D-printed multilayer membranes for photocatalytic degradation of ciprofloxacin

Dinis․ C․ Alves, P․M․ Martins, Rafael Pinto, Pedro Costa, B․ Bazán, Roberto Fernández de Luis, D․M․ Correia and S․ Lanceros-Méndez

Applied Materials Today, 2025, 44, 102728
DOI: 10.1016/j.apmt.2025.102728

Multi-Material Ink Direct Writing System with Material Switching Optimization

Xishuang Jing, Boyan Shen, Lesheng Yang, Jihao Ran, Xunsheng Du and Fubao Xie

3D Printing and Additive Manufacturing, 2025
DOI: 10.1089/3dp.2025.0043

A comprehensive review of additive manufacturing techniques for conductive polymeric composites in energy storage applications

Reza Sedaghat, Seyed Amirreza Zareian, Sasan Sattarpanah Karganroudi and Mazeyar Parvinzadeh Gashti

Journal of Energy Storage, 2026, 151, 120392
DOI: 10.1016/j.est.2026.120392

3D-printing of selectively porous, freestanding structures via humidity-induced rapid phase change

Jacob Search, Alireza Mahjoubnia, Andy C. Chen, Heng Deng, Aik Jong Tan, Shi-you Chen and Jian Lin

Additive Manufacturing, 2023, 68, 103514
DOI: 10.1016/j.addma.2023.103514

A review on extrusion-based 3D-printed nanogenerators for energy harvesting

Muhammad Wajahat, Abbas Z. Kouzani, Sui Yang Khoo and M. A. Parvez Mahmud

J Mater Sci, 2022, 57, 140
DOI: 10.1007/s10853-021-06637-z

3D printing and properties of cellulose nanofibrils-reinforced quince seed mucilage bio-inks

Hossein Baniasadi, Roberta Teixeira Polez, Erfan Kimiaei, Zahraalsadat Madani, Orlando J. Rojas, Monika Österberg and Jukka Seppälä

International Journal of Biological Macromolecules, 2021, 192, 1098
DOI: 10.1016/j.ijbiomac.2021.10.078

Marine polysaccharides as promising 3D printable biomaterials for potential wound healing and antimicrobial therapeutics delivery: A review

Sharon Rose Pamshong, Upadhyayula Suryanarayana Murty and Subham Banerjee

International Journal of Biological Macromolecules, 2025, 322, 147011
DOI: 10.1016/j.ijbiomac.2025.147011

Fluid Mechanics Challenges in Direct-Ink-Writing Additive Manufacturing

Alban Sauret, Tyler R. Ray and Brett G. Compton

Annual Review of Fluid Mechanics, 2026, 58, 413
DOI: 10.1146/annurev-fluid-100224-111013

PDMS microspheres as rheological additives for PDMS-based DIW inks

Utkarsh Ramesh, Jonathan Miller, Bryce Stottelmire, James Beach, Steven Patterson, Laura Cumming, Sabrina Wells Torres, Dakota Even, Petar Dvornic and Cory Berkland

Advanced Industrial and Engineering Polymer Research, 2025, 8, 1
DOI: 10.1016/j.aiepr.2024.06.001

A 3D‐Printed, Freestanding Carbon Lattice for Sodium Ion Batteries

Yuto Katsuyama, Akira Kudo, Hiroaki Kobayashi, Jiuhui Han, Mingwei Chen, Itaru Honma and Richard B. Kaner

Small, 2022, 18
DOI: 10.1002/smll.202202277

3D-printable, lightweight, and electrically conductive metal inks based on evaporable emulsion templates jammed with natural rheology modifiers

Seoung Young Ryu, Chaesu Kwak, Jieun Kim, Suyeon Kim, Hanbin Cho and Joohyung Lee

Journal of Colloid and Interface Science, 2022, 628, 758
DOI: 10.1016/j.jcis.2022.08.062

Rheological formulation of room temperature vulcanizing silicone elastomer ink for extrusion-based 3D printing at room temperature

Jeng Jit Lim, Jia Huey Sim and Jing Yuen Tey

Journal of Manufacturing Processes, 2023, 102, 632
DOI: 10.1016/j.jmapro.2023.07.066

Direct writing of electronic circuits using functionalised multi-walled carbon nanotubes and polyvinyl alcohol conductive ink

Syed Riyaz Ahammed and Praveen Ayyappan Susila

Advances in Materials and Processing Technologies, 2022, 8, 2496
DOI: 10.1080/2374068X.2021.1913325

On the 3D printed catalyst for biomass-bio-oil conversion: Key technologies and challenges

Vahid Haseltalab, Animesh Dutta and Sheng Yang

Journal of Catalysis, 2023, 417, 286
DOI: 10.1016/j.jcat.2022.12.013

Additive Manufacturing of Thermoelectrics: Emerging Trends and Outlook

Danwei Zhang, Wei Yang Samuel Lim, Solco Samantha Faye Duran, Xian Jun Loh and Ady Suwardi

ACS Energy Lett., 2022, 7, 720
DOI: 10.1021/acsenergylett.1c02553

3D printed MXene architectures for a plethora of smart applications

Maria Leonor Matias, Cláudia Pereira, Henrique Vazão Almeida, Santanu Jana, Shrabani Panigrahi, Ugur Deneb Menda, Daniela Nunes, Elvira Fortunato, Rodrigo Martins and Suman Nandy

Materials Today Advances, 2024, 23, 100512
DOI: 10.1016/j.mtadv.2024.100512

Research Progress and Challenges in 3D Printing of Bioceramics and Bioceramic Matrix Composites

Xueni Zhao, Jizun Liu and Lingna Li

Biomimetics, 2025, 10, 428
DOI: 10.3390/biomimetics10070428

Recent Advances in Plant-Based Edible Emulsion Gels for 3D-Printed Foods

Xiyue Liu, Yanpeng Cheng, Tiexin Sun, Yi Lu, Siqi Huan, Shouxin Liu, Wei Li, Zhiguo Li, Yang Liu, Orlando J. Rojas, David Julian McClements and Long Bai

Annual Review of Food Science and Technology, 2025, 16, 63
DOI: 10.1146/annurev-food-111523-121736

Modelling the anisotropic thermal conductivity of 3D logpile structures

L. Moreno-Sanabria, R. Barea, M.I. Osendi, M. Belmonte and P. Miranzo

Journal of the European Ceramic Society, 2023, 43, 4462
DOI: 10.1016/j.jeurceramsoc.2023.03.017

Potential of organogel‐based colloidal hydrogels for new cosmetic formulations

Andrea Gregorio Gomes, Lea Broche, Bruno Payre, Emile Perez, Celine Picard and Sophie Franceschi

Intern J of Cosmetic Sci, 2026
DOI: 10.1111/ics.70089

Metal-organic framework derivatives with complex architectures: Controllable synthesis and applications

Guangxun Zhang, Hao Li, Qiujing Wang, Yichun Su, Yangyang Sun and Huan Pang

Nano Research, 2025, 18, 94907229
DOI: 10.26599/NR.2025.94907229

Additive manufacturing of ceramic materials for energy applications: Road map and opportunities

Corson L. Cramer, Emanuel Ionescu, Magdalena Graczyk-Zajac, Andrew T. Nelson, Yutai Katoh, Jeffery J. Haslam, Lothar Wondraczek, Trevor G. Aguirre, Saniya LeBlanc, Hsin Wang, Mansour Masoudi, Ed Tegeler, Ralf Riedel, Paolo Colombo and Majid Minary-Jolandan

Journal of the European Ceramic Society, 2022, 42, 3049
DOI: 10.1016/j.jeurceramsoc.2022.01.058

Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage

Sarah N. Lak, Chia-Min Hsieh, Luma AlMahbobi, Yifei Wang, Anirban Chakraborty, Choongho Yu and Emily B. Pentzer

ACS Appl. Eng. Mater., 2023, 1, 2279
DOI: 10.1021/acsaenm.3c00324

A comprehensive review of ceramic additive manufacturing: Advancements in Direct Ink Writing (DIW) and tribological properties of 3D-printed ceramics

M. Alebrahim, M.J. Ghazali, N.H. Jamadon and Y. Otsuka

Tribology International, 2025, 207, 110606
DOI: 10.1016/j.triboint.2025.110606

3D hierarchical porous structures printed from a silica-nickel composite paste

Ewelina Mackiewicz, Tomasz Wejrzanowski, Remigiusz Nowacki, Jakub Jaroszewicz, Jakub Marchewka, Łukasz Wilk, Patryk Bezkosty and Maciej Sitarz

Applied Materials Today, 2023, 33, 101859
DOI: 10.1016/j.apmt.2023.101859

A Reversible Zinc-Ion Microbattery from a Printed Gel-Electrolyte and a Carbon–Zinc Formulation

Stefano Tagliaferri, Nagaraju Goli, Maria S. Sokolikova, Haoyu Bai, Caiwu Liang, Ifan E. L. Stephens and Cecilia Mattevi

ACS Appl. Mater. Interfaces, 2025, 17, 38215
DOI: 10.1021/acsami.5c05599

3D-printed lithium-metal batteries: Multiscale architectures, hybrid technologies, and monolithic integration for next-generation energy storage

Shengchen Yang and Dongdong Li

Applied Physics Reviews, 2025, 12
DOI: 10.1063/5.0284782

Development and Optimization of Phenolic Binder–Carbon Black Powder Feedstock for Potential Binder Jet 3D Printing of Carbon Structures

Dilawar Hussain

J. of Materi Eng and Perform, 2025
DOI: 10.1007/s11665-025-13027-y

Design and Fabrication of Carbon-Based Printable Inks for All-Solid-State Supercapacitors with High Capacitance and High Flexibility

Zhidan Shi, Xuefeng Sha, Xianyin Song, Fan Zeng, Xueli Wu, Minghao Yu, Xingang Zhang, Rui Xu and Changzhong Jiang

ACS Appl. Energy Mater., 2025, 8, 4564
DOI: 10.1021/acsaem.5c00149

3D laser activatable alloy-free solid/liquid biphasic conductive composites for additive manufacturable electronics

Seok Jin Hong, Yejin Jo, Beomjung Baek, Seongmin Jeong, Jung Hwan Park and Sunho Jeong

Additive Manufacturing, 2024, 91, 104318
DOI: 10.1016/j.addma.2024.104318

MXenes and its composite structures: synthesis, properties, applications, 3D/4D printing, and artificial intelligence; machine learning integration

Vimukthi Dananjaya, Nethmi Hansika, Sathish Marimuthu, Venkata Chevali, Yogendra Kumar Mishra, Andrews Nirmala Grace, Nisa Salim and Chamil Abeykoon

Progress in Materials Science, 2025, 152, 101433
DOI: 10.1016/j.pmatsci.2025.101433

3D printed silicon-based micro-lattices with ultrahigh areal/gravimetric capacities and robust structural stability for lithium-ion batteries

Jie Fu, Dong Wang, Yan Li, Xianzheng Liu, Rui Zhang, Zhiyuan Liu, Pengdong Liu, Lijuan Zhang, Xuefei Li and Guangwu Wen

Nano Res., 2024, 17, 2693
DOI: 10.1007/s12274-023-6113-0

A comprehensive review of the 3D printing of sp2 carbons: Materials, properties and applications

Satendra Kumar, Manoj Goswami, Netrapal Singh, Sathish Natarajan and Surender Kumar

New Carbon Materials, 2022, 37, 1046
DOI: 10.1016/S1872-5805(22)60651-6

Recent Progress and Perspectives of Direct Ink Writing Applications for Mass Transfer Enhancement in Gas‐Phase Adsorption and Catalysis

Qiwei Chen, Enze Tian, Yan Wang, Jinhan Mo, Guiyin Xu and Meifang Zhu

Small Methods, 2023, 7
DOI: 10.1002/smtd.202201302

3D printing of a high-performance composite solid-state electrolyte with enhanced ionic conductivity and mechanical properties

Zhantong Tu, Kaiqi Chen, Jiating Zheng, Sijie Liu, Bing Lei and Xin Wu

Next Energy, 2025, 7, 100283
DOI: 10.1016/j.nxener.2025.100283

Nanofabrication via Maskless Localized Atomic Layer Deposition of Patterned Nanoscale Metal Oxide Films

Laabdia Midani, Waël Ben-Yahia, Vincent Salles and Catherine Marichy

ACS Appl. Nano Mater., 2021, 4, 11980
DOI: 10.1021/acsanm.1c02550

Towards a predictive understanding of direct ink writing of graphene-based inks

Laura S. van Hazendonk, Coen F. Vonk, Wilko van Grondelle, Niels H. Vonk and Heiner Friedrich

Applied Materials Today, 2024, 36, 102014
DOI: 10.1016/j.apmt.2023.102014

Metallic nanoparticle inks for flexible printed electronics

Ruimin Cai, Cunman Liang, Yongqing Duan, Zhijun Zhao, Xi Zhang, Pei He, JunLiang Yang, Wen‐Yong Lai, Jun Wei and Liang Tian

FlexMat, 2025, 2, 225
DOI: 10.1002/flm2.40

Influence of active material content on the performance of direct ink printed lithium-ion battery cathodes

Rafael S. Pinto, Loic Hilliou, Viktor Petrenko, Carlos M. Costa, Senentxu Lanceros-Méndez and Renato Gonçalves

Journal of Power Sources, 2026, 662, 238807
DOI: 10.1016/j.jpowsour.2025.238807

The effect of graphene properties on the extrusion of a shape memory epoxy vitrimer

Yinglun Hong, Itxaso Azcune, Alaitz Rekondo and Eduardo Saiz

Materials & Design, 2024, 246, 113344
DOI: 10.1016/j.matdes.2024.113344

Toward Circular Polymer Materials and Manufacturing: Dynamic Bonding Strategies for Upcycling Thermoplastics and Thermosets

Leila Shahriari and Sungjin Kim

Macromol. Rapid Commun., 2025, 46
DOI: 10.1002/marc.202401011

Custom-form iron trifluoride Li-batteries using material extrusion and electrolyte exchanged ionogels

Jorge A. Cardenas, John P. Bullivant, Bryan R. Wygant, Aliya S. Lapp, Nelson S. Bell, Timothy N. Lambert, Laura C. Merrill, A. Alec Talin, Adam W. Cook, Eric Allcorn and Katharine L. Harrison

Additive Manufacturing, 2024, 84, 104102
DOI: 10.1016/j.addma.2024.104102

Last developments in polymers for wearable energy storage devices

Silvia Lage‐Rivera, Ana Ares‐Pernas and María‐José Abad

Intl J of Energy Research, 2022, 46, 10475
DOI: 10.1002/er.7934

Current significance and future perspective of 3D-printed bio-based polymers for applications in energy conversion and storage system

Khoiria Nur Atika Putri, Varol Intasanta and Voravee P. Hoven

Heliyon, 2024, 10, e25873
DOI: 10.1016/j.heliyon.2024.e25873

Direct-write printed magnetic-controlled soft robots for non-contact applications

Xiaojun Chen, Yueyu Xu, Xitong Lin, Ruoxian Zheng, Deyun Mo, Haishan Lian, Xin Li and Zaifu Cui

AIP Advances, 2023, 13
DOI: 10.1063/5.0183288

High-areal capacity and binder-free thick-ceramic LFP electrodes manufactured by robocasting for Li-ion batteries

Cynthia S. Martínez-Cisneros, Cristina Ramírez, Dayron Martínez-Rodríguez, Manuel Belmonte, Belen Levenfeld and Alejandro Varez

Journal of Power Sources, 2025, 657, 238170
DOI: 10.1016/j.jpowsour.2025.238170

Effect of particle shape on rheology and printability of highly filled reactive inks for direct ink writing

Andrew House, Anna Kuna, Daniel Hastings, Nikki Rodriguez, Mirko Schoenitz, Edward L. Dreizin and Murat Guvendiren

Prog Addit Manuf, 2023, 8, 1573
DOI: 10.1007/s40964-023-00422-x

Review of progress in 4D printing of piezoelectric energy harvesters

Amal Megdich, Mohamed Habibi and Luc Laperrière

Materials Science and Engineering: R: Reports, 2025, 166, 101072
DOI: 10.1016/j.mser.2025.101072

Recent progress of alumina ceramics by direct ink writing: Ink design, printing and post-processing

Sk S. Hossain and Kathy Lu

Ceramics International, 2023, 49, 10199
DOI: 10.1016/j.ceramint.2023.01.143

3D printing of metal-organic frameworks for electrochemical energy storage devices

Osama Gohar, Iqbal Nisa, Mohsin Saleem, Huijie Zhou, Muhammad Zubair Khan, Mutawara Mahmood Baig, Mukarram Ali, Jung-Hyuk Koh, Asad Riaz, Yizhou Zhang and Huan Pang

Coordination Chemistry Reviews, 2026, 549, 217353
DOI: 10.1016/j.ccr.2025.217353

Additive manufacturing of Proton-Conducting Ceramics by robocasting with integrated laser postprocessing

Joanna Pośpiech, Małgorzata Nadolska, Mateusz Cieślik, Tomasz Sobczyk, Marek Chmielewski, Aleksandra Mielewczyk-Gryń, Ragnar Strandbakke, José Manuel Serra and Sebastian Lech Wachowski

Applied Materials Today, 2024, 40, 102398
DOI: 10.1016/j.apmt.2024.102398

Electrical conductivity analysis of extrusion-based 3D-printed graphene

Hushein R, Mohamed Iqbal Shajahan, Robert Čep, Sachin Salunkhe, Arun Prasad Murali, Gawade Sharad, Hussein Mohamed Abdelmoneam Hussein and Emad Abouel Nasr

Front. Mater., 2024, 11
DOI: 10.3389/fmats.2024.1328347

Electrostatic Dissipation in 3D-Printable Silicone

Jeremy A. Armas, Michael J. Ford, Kenton P. Foster, Terence Hall, Colin K. Loeb, Spencer Schmidt, Stanley F. Williams, Kathlyn L. Baron, Lemuel X. Pérez Pérez, Fangyou Xie, Taylor M. Bryson and Jeremy M. Lenhardt

ACS Appl. Mater. Interfaces, 2024
DOI: 10.1021/acsami.4c09455

Oozing control and retraction in colloid 3D printing: parametric analysis

Mohammed Al-Ali and Yara Almubarak

Prog Addit Manuf, 2025, 10, 5217
DOI: 10.1007/s40964-024-00898-1

Direct ink writing of particle-based multiphase materials: From rheology to functionality

Stijn De Smedt, Benedetta Attaianese and Ruth Cardinaels

Current Opinion in Colloid & Interface Science, 2025, 75, 101889
DOI: 10.1016/j.cocis.2024.101889

Role of Rheology in Morphology Development and Advanced Processing of Thermoplastic Polymer Materials: A Review

Ritima Banerjee and Suprakas Sinha Ray

ACS Omega, 2023, 8, 27969
DOI: 10.1021/acsomega.3c03310

Progress on additive manufacturing technology of solid propellants

Christian Ingabire, Dao-lun Liang and Li-xiang Li

Energetic Materials Frontiers, 2025, 6, 224
DOI: 10.1016/j.enmf.2025.06.001

Recent Advances in 3D Printing Technologies for Lithium‐Sulfur Batteries

Fei Shen, Congqing Tang, Xiaohan Sun, Yingze Song and Jingsheng Cai

Small, 2025, 21
DOI: 10.1002/smll.202412182

Voxel Interface Control in Multimaterial Extrusion 3D Printing

Daniel C. Ames, Sarah Propst, Aadarsh Shah and Jochen Mueller

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202407599

A Review of 3D Printing Batteries

Maryam Mottaghi and Joshua M. Pearce

Batteries, 2024, 10, 110
DOI: 10.3390/batteries10030110

3D-printed, high-energy-density, current collector-free flexible micro-supercapacitors based on CNT@V2O5 nanowires

Keon-Woo Kim, Kaibin Wu, Bomi Park, Junho Jang, Jin Han Kwon, Asrar Alam, Sooman Lim, Se Hyun Kim, Jin Kon Kim and Hong Chul Moon

Journal of Energy Storage, 2024, 75, 109642
DOI: 10.1016/j.est.2023.109642

Viscoelastic and thixotropic characterization of paraffin/photopolymer composites for extrusion-based printing

Ciera E. Cipriani, Yalan Shu, Emily B. Pentzer and Chandler C. Benjamin

Physics of Fluids, 2022, 34
DOI: 10.1063/5.0104157

Direct-ink-writing of highly deformable, multi-layered electrical devices using elastomer-based dual inks

Jung Hyun Kim, Huy Le Quang, Ho Hyung Sim, Jun Chang Yang, Jaeyeon Pyo, Min Woo Kim and Seung Kwon Seol

Virtual and Physical Prototyping, 2025, 20
DOI: 10.1080/17452759.2025.2509611

Effect of oxide nanoparticles in aqueous alumina inks for material extrusion additive manufacturing

Sk S. Hossain and Farid Akhtar

Journal of the European Ceramic Society, 2024, 44, 6668
DOI: 10.1016/j.jeurceramsoc.2024.04.015

Recent advances in 3D printed electrode materials for electrochemical energy storage devices

Suhail Mubarak, Duraisami Dhamodharan and Hun-Soo Byun

Journal of Energy Chemistry, 2023, 81, 272
DOI: 10.1016/j.jechem.2023.01.037

Liquid Shear Exfoliation of MoS2: Preparation, Characterization, and NO2-Sensing Properties

Pingping Ni, Mbaye Dieng, Jean-Charles Vanel, Ileana Florea, Fatima Zahra Bouanis and Abderrahim Yassar

Nanomaterials, 2023, 13, 2502
DOI: 10.3390/nano13182502

Investigating the rheology of 2D titanium carbide (MXene) dispersions for colloidal processing: Progress and challenges

Michael Greaves, Mana Mende, Jiacheng Wang, Wenji Yang and Suelen Barg

Journal of Materials Research, 2021, 36, 4578
DOI: 10.1557/s43578-021-00282-7

System-level multi-stage modeling and multi-criteria optimization of direct ink writing

Wuyang Chen, Chenyu Xu, Licheng Liang, Chi Zhou and Hongyue Sun

Additive Manufacturing, 2026, 119, 105122
DOI: 10.1016/j.addma.2026.105122

Solvent- and binder-free additive manufacturing of polymer-derived ceramics: Rheological tuning and structural performance

Laxmi Sai Viswanadha, Jeremy Watts and Mohammad Naraghi

Additive Manufacturing, 2025, 111, 104962
DOI: 10.1016/j.addma.2025.104962

Recent Advances in Additive Manufacturing: Processes, Materials, and Applications Toward Industrial Competitiveness and Sustainability

Seo-hyeon Oh, Vikram GC, Dae-woong Park, Bipendra Basnet and Jae-won Choi

KSMPE, 2026, 25, 56
DOI: 10.14775/ksmpe.2026.25.1.056

A Simple Route of Printing Explosive Crystalized Micro-Patterns by Using Direct Ink Writing

Albertus Brilian, Veasna Soum, Sooyong Park, Soojin Lee, Jungwook Kim, Kuktae Kwon, Oh-Sun Kwon and Kwanwoo Shin

Micromachines, 2021, 12, 105
DOI: 10.3390/mi12020105

Macro‐ and Nano‐Porous 3D‐Hierarchical Carbon Lattices for Extraordinarily High Capacitance Supercapacitors

Yuto Katsuyama, Nagihiro Haba, Hiroaki Kobayashi, Kazuyuki Iwase, Akira Kudo, Itaru Honma and Richard B. Kaner

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202201544

Pinching dynamics and extensional rheology of dense colloidal suspensions with depletion attractions

Diego D. Soetrisno, Carina D. V. Martínez Narváez, Mariah J. Gallegos, Vivek Sharma and Jacinta C. Conrad

Journal of Rheology, 2024, 68, 99
DOI: 10.1122/8.0000717

Lignin‐Based Materials for Additive Manufacturing: Chemistry, Processing, Structures, Properties, and Applications

Bo Jiang, Huan Jiao, Xinyu Guo, Gegu Chen, Jiaqi Guo, Wenjuan Wu, Yongcan Jin, Guozhong Cao and Zhiqiang Liang

Advanced Science, 2023, 10
DOI: 10.1002/advs.202206055

Electrochemical additive manufacturing of micro/nano functional metals

Wending Gu and Yijiao Jiang

Materials Today Sustainability, 2024, 27, 100793
DOI: 10.1016/j.mtsust.2024.100793

Electric-field-assisted direct ink writing (eDIW) process modeling

Yinong Chen, Xinnian Wang, Anupam Ajit Deshpande and Yayue Pan

Journal of Manufacturing Processes, 2025, 143, 17
DOI: 10.1016/j.jmapro.2025.03.099

Flexible MXenes for printing energy storage devices

Iftikhar Hussain, Onkar Jaywant Kewate, Sumanta Sahoo, Sikandar Aftab, P. Rosaiah, Muhammad Ahmad, Muhammad Bilal Hanif, Wail Al Zoubi, Zeeshan Ajmal, Waqas Ul Arifeen, Mohd Zahid Ansari, Bhargav Akkinepally and Kaili Zhang

Chemical Engineering Journal, 2024, 497, 154978
DOI: 10.1016/j.cej.2024.154978

Predicting Colloidal Ink 3D Printing Behavior Using Simple Piecewise Power Law Constitutive Model

M. Naimul Hoque, Adolofo Cazares and Gordon F. Christopher

J. of Materi Eng and Perform, 2025, 34, 1301
DOI: 10.1007/s11665-023-09116-5

Optimizing rheological characterization for extrusion-based additive manufacturing of Zirconia ceramic inks with varied Yttria content stabilization

Mona Yarahmadi, Laura Del Mazo-Barbara, Joan Josep Roa, Luis Llanes, Maria-Pau Ginebra and Gemma Fargas

Journal of the European Ceramic Society, 2025, 45, 116797
DOI: 10.1016/j.jeurceramsoc.2024.116797

Advances in 3D printed sensors for food analysis

Danilo M. dos Santos, Rafael M. Cardoso, Fernanda L. Migliorini, Murilo H.M. Facure, Luiza A. Mercante, Luiz H.C. Mattoso and Daniel S. Correa

TrAC Trends in Analytical Chemistry, 2022, 154, 116672
DOI: 10.1016/j.trac.2022.116672

Direct Ink Writing 3D Printing for High‐Performance Electrochemical Energy Storage Devices: A Minireview

Li Zeng, Shangwen Ling, Dayue Du, Hanna He, Xiaolong Li and Chuhong Zhang

Advanced Science, 2023, 10
DOI: 10.1002/advs.202303716

Additive manufacturing of vitrimers: Interplay between polymer physics and processing approaches

Arit Das, Anubhav Sarmah, Larry E. Luster, Micah J. Green and Michael J. Bortner

Chemical Engineering Journal, 2025, 525, 170221
DOI: 10.1016/j.cej.2025.170221

Viscoplastic lines: printing a single filament of yield stress material on a surface

Jesse van der Kolk, Daniël Tieman and Maziyar Jalaal

J. Fluid Mech., 2023, 958
DOI: 10.1017/jfm.2023.118

Boosting Piezoelectricity by 3D Printing PVDF‐MoS2 Composite as a Conformal and High‐Sensitivity Piezoelectric Sensor

Md. Nurul Islam, Rifat Hasan Rupom, Pashupati R. Adhikari, Zoriana Demchuk, Ivan Popov, Alexei P. Sokolov, H. Felix Wu, Rigoberto C. Advincula, Narendra Dahotre, Yijie Jiang and Wonbong Choi

Adv Funct Materials, 2023, 33
DOI: 10.1002/adfm.202302946

Direct ink writing of bioceramic prosthetics and scaffolds: advances, challenges, and biomedical applications

D. L. Belgin Paul and Praveen Ayyappan Susila

Prog Addit Manuf, 2025, 10, 5829
DOI: 10.1007/s40964-025-01002-x

3D printed energy devices: generation, conversion, and storage

Jin-ho Son, Hongseok Kim, Yoonseob Choi and Howon Lee

Microsyst Nanoeng, 2024, 10
DOI: 10.1038/s41378-024-00708-2