Issue 31, 2019

Highly stable kirigami-structured stretchable strain sensors for perdurable wearable electronics

Abstract

In wearable electronics, to acquire stability and simultaneously preserve stretchability, sensitivity, and scalability is of high significance yet challenging for practical device applications. In this work, a kirigami-structured graphene–polymer hybrid nanocomposite is proposed for strain sensors by a laser direct writing technique on a polyimide sheet. Using such kirigami structures, the strain in the sensor material can be drastically reduced in the circumstances of high stretching conditions. To protect the device, ecoflex polymer is applied as the passivation layer. Depending on the applications, ecoflex grid-wrapped and film-encapsulated devices are realized with high stretchability (>200% strain) and sensitivity (>80% resistance change at 60% strain), respectively. Significantly, this sensor platform presents almost no performance degradation even after >60 000 stretching cycle tests due to less strain within the sensor. Furthermore, as proof-of-concept for human-interactive applications, motion detection and respiration monitoring with a breathing period of 3–4 s for a comparatively long duration (>2 hours) are successfully demonstrated. These facile, scalable, highly stable and stretchable strain sensors afford a new route towards next-generation reliable skin-inspired wearable electronics.

Graphical abstract: Highly stable kirigami-structured stretchable strain sensors for perdurable wearable electronics

Supplementary files

Article information

Article type
Paper
Submitted
08 апр. 2019
Accepted
10 јул. 2019
First published
12 јул. 2019

J. Mater. Chem. C, 2019,7, 9609-9617

Author version available

Highly stable kirigami-structured stretchable strain sensors for perdurable wearable electronics

K. Xu, Y. Lu, S. Honda, T. Arie, S. Akita and K. Takei, J. Mater. Chem. C, 2019, 7, 9609 DOI: 10.1039/C9TC01874C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements