Issue 13, 2018

Nano-scale hydroxyapatite compositions for the utilization of CO2 recovered using post-combustion carbon capture

Abstract

The synthesis and analysis of a sodium-carbonate co-substituted hydroxyapatite (Ca10−xNax(PO4)6−x(CO3)x(OH)2) with potential applications in carbon capture technologies is described. A co-substituted hydroxyapatite, using NaCl as the source of sodium, containing approximately 14 wt% carbonate was successfully prepared by an aqueous precipitation reaction followed by a thermal treatment under a stream of CO2 gas at 500 °C. In order to reach this level of carbonation, CO2 gas was constantly supplied to the reactant mixture during precipitation. Another hydroxyapatite prepared with sodium carbonate, Na2CO3, in non-carbonated water but following the same methodology, incorporated a higher level (approximately 17 wt%) of carbonate. This increase was likely a result of additional carbonate provided by the sodium carbonate starting material. The underlying aim of this work was to examine the possibility of using hydroxyapatites to incorporate carbon dioxide from gas recovered from post-combustion carbon capture (PC-CC) techniques. As the chemical composition of these materials resembles bone mineral, it may be possible to use the final product in agriculture as a slow-release fertilizer and thus make use of the products.

Graphical abstract: Nano-scale hydroxyapatite compositions for the utilization of CO2 recovered using post-combustion carbon capture

Article information

Article type
Paper
Submitted
23 окт. 2017
Accepted
02 јан. 2018
First published
02 јан. 2018

J. Mater. Chem. A, 2018,6, 5367-5377

Nano-scale hydroxyapatite compositions for the utilization of CO2 recovered using post-combustion carbon capture

D. A. Nowicki, Janet M. S. Skakle and I. R. Gibson, J. Mater. Chem. A, 2018, 6, 5367 DOI: 10.1039/C7TA09334A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements