Issue 45, 2018

Adsorption and diffusion of lithium polysulfides over blue phosphorene for Li–S batteries

Abstract

Lithium–sulphur (Li–S) batteries suffer from capacity loss due to the dissolution of lithium polysulfides (LiPSs). Although finding cathodes that can trap LiPSs strongly is a possible solution to suppress the “shuttle” effect, fast diffusion of lithium and LiPSs is also pivotal to prevent agglomeration. We report that monolayer blue phosphorene (BP), a recently synthesized two-dimensional material, possesses these characteristics as a cathode in Li–S batteries. Density functional theory calculations showed that while the adsorption energies (Eb) of various LiPSs over pristine BP are reasonably strong (from −0.86 eV to −2.45 eV), defect engineering of the lattice by introducing a single vacancy (SV) increased the binding strength significantly, with Eb in the range of −1.41 eV to −4.34 eV. Ab-initio molecular dynamics simulations carried out at 300 K showed that the single vacancies trap the Li atoms in the LiPSs compared to pristine BP. Projected density of states revealed that the creation of an SV induces metallicity in the cathode. Furthermore, an increase in the adsorption strength did not cause significant structural deformation, implying that the soluble large LiPSs did not decompose, which is essential to suppress capacity fading. The energy barriers for LiPSs’ migration over pristine BP are minimal to ensure ultrafast diffusion, with the lowest diffusion energy barriers being 0.23 eV, 0.13 eV and 0.18 eV for Li2S4, Li2S6 and Li2S8, respectively. Furthermore, the energy barrier associated with the catalytic oxidation of Li2S over pristine and defective BP was found to be greater than three times smaller compared to graphene, which suggests that charging processes could be faster by orders of magnitude. Therefore, BP with a suitable combination of defects would be an excellent cathode material in Li–S batteries.

Graphical abstract: Adsorption and diffusion of lithium polysulfides over blue phosphorene for Li–S batteries

Supplementary files

Article information

Article type
Paper
Submitted
14 јун. 2018
Accepted
03 окт. 2018
First published
09 окт. 2018

Nanoscale, 2018,10, 21335-21352

Adsorption and diffusion of lithium polysulfides over blue phosphorene for Li–S batteries

S. Mukherjee, L. Kavalsky, K. Chattopadhyay and C. V. Singh, Nanoscale, 2018, 10, 21335 DOI: 10.1039/C8NR04868A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements